12-18-2015, 02:49 PM | #1 |
Barbie Aficionado
Drives: 2013 2SS/RS Join Date: Aug 2014
Location: Under the moonlight... the serious moonlight, NC
Posts: 191
|
1:6 scale RC Camaro Help/Info needed
Was lucky to find one of the Hot Rod Magazine/Year 1/Radio Shack '69 Verts at a junk shop, but of course the 27mhz remote & battery charger was missing. The car is in flawless condition, & the battery pack seems to still have a charge... as I can hear the relay (?) clicking when I flip the power switch on, & a red light is flashing on the dash. Unfortunately, the car does NOTHING without the remote transmitter (no exterior lights or interior gauge lights either).
**So my questions are: #1. Will any aftermarket 27mhz remote connect with this car, or do I need to look for a specific model (or coding info the circuit board?) to determine which multifunction remote will steer the car, operate lights, etc. #2. Is there a way to at least get the interior/exterior lights to work for my diorama photography... I could honestly care less about driving it. |
12-18-2015, 03:17 PM | #2 |
Drives: 2011 SIM 2SS/RS LS3 Join Date: Sep 2013
Location: Tupelo, MS
Posts: 5,902
|
Yes, any 27mhz will work
__________________
2011 2SS/RS built 8/24/10
|
12-19-2015, 03:41 PM | #3 |
Barbie Aficionado
Drives: 2013 2SS/RS Join Date: Aug 2014
Location: Under the moonlight... the serious moonlight, NC
Posts: 191
|
Thanks Rebel. Cheers.
|
|
|