ZL1 lower front splitter replacement? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

nickswe · 05-25-2014, 09:01 PM

The previous owner has clearly parked too close to a curb and made some marks to the lower front splitter on my 2014 ZL1.

Does anyone know the cost of a new one?

I've been looking at it and it appears you will have to remove the entire front bumper to gain access to replacing the splitter - am I correct? Does anyone sit on a good movie or other instruction showing how to remove and put it back? And what tools that are necessary, and also if I should get some new clips or other parts that might be good to have while doing the job.

Thanks!

gmgdave · 05-25-2014, 09:19 PM

the 2012 one is less than $100, I have a spare

nickswe · 05-25-2014, 09:27 PM

Quote:

Originally Posted by gmgdave

the 2012 one is less than $100, I have a spare

That sounds promising. You have any details of how to fit it (see my post above) ?

Garrett Custom · 05-25-2014, 09:44 PM

I've ordered from these guys before without any issues.

http://www.gmpartsonline.net/2012-chevrolet-camaro.html

nickswe · 05-25-2014, 09:47 PM

Quote:

Originally Posted by Garrett Custom

I've ordered from these guys before without any issues.

http://www.gmpartsonline.net/2012-chevrolet-camaro.html

Thanks! I checked it out and they had nothing for the 2014 ZL1 though :(

hairtrigger · 05-25-2014, 10:01 PM

Quote:

Originally Posted by nickswe

Thanks! I checked it out and they had nothing for the 2014 ZL1 though :(

12-14 has the same front end

nickswe · 05-25-2014, 10:07 PM

Quote:

Originally Posted by hairtrigger

12-14 has the same front end

Yeah it appears so from pictures on Google etc. Though when looking at the diagram on that website I cannot locate the correct piece as the diagram looks different to photos and reality.

NZZL1 · 05-26-2014, 01:30 AM

Item 5 as follows, pn 22894223

http://www.gmpartsonline.net/parts/2...iagram=CD10017

Maureen at Rodgers supplied my spare one for a little over USD100.

ex-SS-ve · 05-26-2014, 01:52 AM

The r&r part of it isnt too bad. Just had mine apart not very long ago. Feel free to ask any questions if you have any about the process.

nickswe · 05-26-2014, 07:39 AM

Quote:

Originally Posted by NZZL1

Item 5 as follows, pn 22894223

http://www.gmpartsonline.net/parts/2...iagram=CD10017

Maureen at Rodgers supplied my spare one for a little over USD100.

Thank you!

nickswe · 05-26-2014, 07:39 AM

Quote:

Originally Posted by ex-SS-ve

The r&r part of it isnt too bad. Just had mine apart not very long ago. Feel free to ask any questions if you have any about the process.

Thanks buddy! I might get back to you when it's time to do the replacement

nickswe · 05-26-2014, 08:09 AM

Do you guys think I will need pos 6, 7 and 8, or will I be able to reuse those from my current bumper installation?

http://www.gmpartsonline.net/parts/2...iagram=CD10017

StealthZL1 · 05-26-2014, 11:52 AM

Who can give me the part number for these rubber undercarriage splash guards?

DBLDARE · 05-26-2014, 12:41 PM

My lower front splitter has some scuffs on it as well and I am interested to replace it since its not too expensive. What all hardware is needed for replacement?

05-25-2014, 09:01 PM	#1
nickswe A Swede lost in Texas Drives: Camaro ZL1 2014 Black M6 Join Date: Apr 2013 Location: Dallas, TX Posts: 489	ZL1 lower front splitter replacement? The previous owner has clearly parked too close to a curb and made some marks to the lower front splitter on my 2014 ZL1. Does anyone know the cost of a new one? I've been looking at it and it appears you will have to remove the entire front bumper to gain access to replacing the splitter - am I correct? Does anyone sit on a good movie or other instruction showing how to remove and put it back? And what tools that are necessary, and also if I should get some new clips or other parts that might be good to have while doing the job. Thanks! __________________ Former owner of a 2012 Camaro SS 45th Anniversary Edition. Currently driving a 2014 Camaro ZL1 Coupe.

05-25-2014, 09:19 PM	#2
gmgdave Drives: 12 ZL1 & 08 Suzuki Boulevard C50 Join Date: Oct 2011 Location: Ocean Shores, WA Posts: 406	the 2012 one is less than $100, I have a spare __________________ 2012 ZL1 - #413 - IOM - Mods; Exhaust Commander. GMG Third Brake Light Pulsar, Tinted Windows, color matched Engine cover, ZL1 Floor Mats

05-25-2014, 09:44 PM	#4
Garrett Custom Drives: 2012 Camaro ZL1, 2000 Silverado LT Join Date: Dec 2013 Location: Pensacola, FL Posts: 160	I've ordered from these guys before without any issues. http://www.gmpartsonline.net/2012-chevrolet-camaro.html __________________ v/r Roger 2012 ZL-1 #1076 2016 Explorer XLT (wife's) 2002 Ducati ST4S 2000 Silverado LT 1995 Triumph Daytona 1200

05-26-2014, 08:09 AM	#12
nickswe A Swede lost in Texas Drives: Camaro ZL1 2014 Black M6 Join Date: Apr 2013 Location: Dallas, TX Posts: 489	Do you guys think I will need pos 6, 7 and 8, or will I be able to reuse those from my current bumper installation? http://www.gmpartsonline.net/parts/2...iagram=CD10017 __________________ Former owner of a 2012 Camaro SS 45th Anniversary Edition. Currently driving a 2014 Camaro ZL1 Coupe.

05-26-2014, 01:30 AM	#8
NZZL1 Drives: 2013 BRM ZL1 Camaro M6 Join Date: Feb 2014 Location: Auckland, New Zealand Posts: 160 View My Garage	Item 5 as follows, pn 22894223 http://www.gmpartsonline.net/parts/2...iagram=CD10017 Maureen at Rodgers supplied my spare one for a little over USD100.

05-26-2014, 01:52 AM	#9
ex-SS-ve Join Date: Feb 2010 Location: Houston, Texas Posts: 763	The r&r part of it isnt too bad. Just had mine apart not very long ago. Feel free to ask any questions if you have any about the process.

05-26-2014, 11:52 AM	#13
StealthZL1 Drives: 2013 Camaro ZL1 Join Date: Aug 2013 Location: Las Vegas, Nevada Posts: 321 View My Garage	Who can give me the part number for these rubber undercarriage splash guards?

05-26-2014, 12:41 PM	#14
DBLDARE DBLDARE Drives: 2013 ZL1 Join Date: May 2014 Location: Memphis, TN Posts: 97	My lower front splitter has some scuffs on it as well and I am interested to replace it since its not too expensive. What all hardware is needed for replacement?