WTB nGauge

[Blown1LE]

Let me know if you have one. Thanks

[Jayjellyfish212]

I’m really considering switching my Aeroforce gauge to a NGauge myself since I’m using HPTuners software with the MPVI2. Would you consider or be interested in say a group buy if one of the vendors on here was willing to create a offer for the NGauge as a group buy? Let me know! I’m sure we could make this happen through one of the vendors.

Thanks
Jay

[Blown1LE]

Yes I would. I wouldn’t mind having the holder that comes off the dash defrost vent too if they are still available

[Jayjellyfish212]

I’m going to put the NGauge in my pillar pod (where my Aeroforce gauge is currently) I use the left dash vent as a switch pod. Currently I have the 2step master switch and a staging fan controller switch in the vent with plans to eventually put other switches in too for the nitrous. Hopefully we can get some people in on a group buy on the NGauge and a vendor willing to provide a great member deal. If it takes to long or drags out I will probably just order one but I’ll give it a week first to see if a vendor can put something together first.

[Famous407]

Count me in for a group buy

[Blown1LE]

Originally Posted by Jayjellyfish212

I’m going to put the NGauge in my pillar pod (where my Aeroforce gauge is currently) I use the left dash vent as a switch pod. Currently I have the 2step master switch and a staging fan controller switch in the vent with plans to eventually put other switches in too for the nitrous. Hopefully we can get some people in on a group buy on the NGauge and a vendor willing to provide a great member deal. If it takes to long or drags out I will probably just order one but I’ll give it a week first to see if a vendor can put something together first.

The nGauge will fit in a pillar pod ? That would be even better !

[Tommy434]

Anyone have a part # on that gauge?

[Jayjellyfish212]

Originally Posted by Tommy434

Anyone have a part # on that gauge?

Just google NGauge for 2010-2015 camaro

[Jayjellyfish212]

Originally Posted by Blown1LE

The nGauge will fit in a pillar pod ? That would be even better !

Looks like it will fit 3 pod gauge size openings based on what they describe on it using the adapter it comes with. They state it will fit standard pods etc. I checked on my pillar gauge pod for the diameter facing if it would be ok since the facing of the NGauge is quite big compared to typical gauges and looks like there is enough room for the face to be in the pillar pod and not look funny. I checked using my round vent trim ring since the NGauge face area is about that diameter. It looks like the NGAUGE is only 1/2 - 3/4 thickness at the facing. I’m gonna put the NGauge in the lower pillar pod opening. It looks like it will work great and look nice there. I can add a few pictures if you want for planning purposes etc.

As for getting a vendor on here to maybe set a group buy up I think we need to probably put a post up in the general discussion section with request for NGauge group buy wanted ?? Think that’s what we need to do to get the ball rolling?

[Jayjellyfish212]

Originally Posted by Famous407

Count me in for a group buy

Awesome. You betcha!

3 in so far .. awesome!

[Jayjellyfish212]

I’m gonna put a post up in the general discussion section and see how it goes from there with any vendors helping us out.

[Blown1LE]

Did you post it yet as I don’t see anything in general discussion

[NoDakZ/28]

Originally Posted by Blown1LE

Did you post it yet as I don’t see anything in general discussion

https://www.camaro5.com/forums/showthread.php?t=560085

[thecarter0]

I have one for sale if anyone wants one sooner.