Help with fore innovation install.

[NoDakZ/28]

Originally Posted by JMI

Green wire with white stripe at the FPCM

Thank you, sorry this is so late!

[mmaattppllaayy]

Originally Posted by JMI

Here's a pic of the T for the sensor.
But this pic,the T was on the return,I changed it to the feed side,and also moved the sensor higher because with the adapter,the fitting was a little lower than the tank.It was the only pic I had because I did the changes after.

Bringing this thread back. Do you remember if the fuel pressure sensor was a 3/8 or 5/16 quick connect fitting? About to buy the adapter for my setup.