Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Tuning / Diagnostics -- engine and transmission


Reply
 
Thread Tools
Old 04-15-2021, 01:36 PM   #1
TheFlyingBananaSS
Evil Genius of Chevrolet
 
TheFlyingBananaSS's Avatar
 
Drives: 2013 2SS, 2015 LaCrosse, 2017 Z06
Join Date: Feb 2017
Location: New York
Posts: 2,928
Exclamation Passing inspection with tune

So I have my car tuned and it won't pass ny state inspection. The evap and egr monitors are staying in the "not ready" status. No amount of driving or cold starts will change it. The tuner says nothing in the tune can cause this. But I never had this issue until the build. Is there something I should look for in hp tuners?
__________________
GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.
TheFlyingBananaSS is offline   Reply With Quote
Old 04-15-2021, 02:18 PM   #2
Bigdumogre

 
Bigdumogre's Avatar
 
Drives: 2012 Camaro SS
Join Date: Dec 2019
Location: New York
Posts: 1,092
That’s really interesting- I would disconnect the battery and reset everything then fill gas 3/4 of the way (not a full tank) and drive it included highway then retest imo. See if they them complete
__________________
2012 Camaro 2SS/RS - K&N cai, Katech ported TB, GPI Ported/rod modded manifold, Texas speed 1 7/8 headers, HFC, Flowmaster 2 chambers with x pipe, Mishimoto CC, MSD wires, Roto fab washer relocation, DynoSteve tune, tru cool 40k trans cooler, apex scoop, heritage grill, jre dipstick mod

Complete street performance appointment booked - Cam, tsp CNC heads and converter.
Bigdumogre is offline   Reply With Quote
Old 04-15-2021, 02:22 PM   #3
ChibiBlackSheep

 
ChibiBlackSheep's Avatar
 
Drives: 2012 2SS/RS, 1968 SS
Join Date: Feb 2012
Location: Southeast, PA
Posts: 1,980
In HPTuner you would go into the DTC settings and make sure everything associated with the EVAP and EGR are set to "no mil/error reported"

Maybe the tuner just shut off the CEL in the tune, but didn't change the error reporting?
__________________

2012 Camaro 2SS/RS | 1968 Camaro SS | 2018 Regal TourX
ChibiBlackSheep is offline   Reply With Quote
Old 04-15-2021, 02:54 PM   #4
TheFlyingBananaSS
Evil Genius of Chevrolet
 
TheFlyingBananaSS's Avatar
 
Drives: 2013 2SS, 2015 LaCrosse, 2017 Z06
Join Date: Feb 2017
Location: New York
Posts: 2,928
I'll take a look in the tune tonight and see what's on or off. Worse case I can always register it in florida with family address.
__________________
GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.
TheFlyingBananaSS is offline   Reply With Quote
Old 04-15-2021, 04:33 PM   #5
Sparko
 
Sparko's Avatar
 
Drives: 2010 Camaro 2SS
Join Date: May 2019
Location: Rochester, NY
Posts: 146
EVAP and EGR are odd things to be holding you up. If you don't have any flags when you monitor with HPT, maybe return all your DTC's to stock to see what trips so you can make sure it's disabled properly.
__________________
2010 Camaro 2SS
2018 Charger GT+
2005 Cavailer LS S/C - Sold
'87 HD FXRT - Wrecked pending repair
Sparko is offline   Reply With Quote
Old 04-15-2021, 04:59 PM   #6
TheFlyingBananaSS
Evil Genius of Chevrolet
 
TheFlyingBananaSS's Avatar
 
Drives: 2013 2SS, 2015 LaCrosse, 2017 Z06
Join Date: Feb 2017
Location: New York
Posts: 2,928
Quote:
Originally Posted by ChibiBlackSheep View Post
In HPTuner you would go into the DTC settings and make sure everything associated with the EVAP and EGR are set to "no mil/error reported"

Maybe the tuner just shut off the CEL in the tune, but didn't change the error reporting?
The choices hp tuners gives are

No error reported
Mil on first error
Mil on second error
No mil light
__________________
GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.
TheFlyingBananaSS is offline   Reply With Quote
Old 04-15-2021, 05:04 PM   #7
ChibiBlackSheep

 
ChibiBlackSheep's Avatar
 
Drives: 2012 2SS/RS, 1968 SS
Join Date: Feb 2012
Location: Southeast, PA
Posts: 1,980
Quote:
Originally Posted by TheFlyingBananaSS View Post
The choices hp tuners gives are

No error reported
Mil on first error
Mil on second error
No mil light
They change the wording every now and then, that's why I gave the /. I would try setting them to no error reported (if they aren't already).

Sometimes just setting to No Mil Light shuts off the check engine light, but doesn't allow readiness to set.
__________________

2012 Camaro 2SS/RS | 1968 Camaro SS | 2018 Regal TourX
ChibiBlackSheep is offline   Reply With Quote
Old 04-16-2021, 08:59 AM   #8
TheFlyingBananaSS
Evil Genius of Chevrolet
 
TheFlyingBananaSS's Avatar
 
Drives: 2013 2SS, 2015 LaCrosse, 2017 Z06
Join Date: Feb 2017
Location: New York
Posts: 2,928
Thank you for the response guys. I will be trying some of these options over the weekend. I hope it works. Florida insurance rates are even higher than NY rates lol. But I'll be down there next week so if this weekend don't work I might have to start the process.
__________________
GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.
TheFlyingBananaSS is offline   Reply With Quote
Old 04-19-2021, 03:03 PM   #9
ChibiBlackSheep

 
ChibiBlackSheep's Avatar
 
Drives: 2012 2SS/RS, 1968 SS
Join Date: Feb 2012
Location: Southeast, PA
Posts: 1,980
Any update? Did stuff work
__________________

2012 Camaro 2SS/RS | 1968 Camaro SS | 2018 Regal TourX
ChibiBlackSheep is offline   Reply With Quote
Old 04-19-2021, 03:06 PM   #10
TheFlyingBananaSS
Evil Genius of Chevrolet
 
TheFlyingBananaSS's Avatar
 
Drives: 2013 2SS, 2015 LaCrosse, 2017 Z06
Join Date: Feb 2017
Location: New York
Posts: 2,928
Well I was going to try but I never got to it over the weekend. But I did manage to buy a new house on Saturday! My baby will be in a garage soon. Hopefully I can get to it this weekend if it doesn't rain.
__________________
GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.
TheFlyingBananaSS is offline   Reply With Quote
Old 04-19-2021, 03:25 PM   #11
Bigdumogre

 
Bigdumogre's Avatar
 
Drives: 2012 Camaro SS
Join Date: Dec 2019
Location: New York
Posts: 1,092
Congrats on the new house.

Did CSP say anything since they just tuned the car?
__________________
2012 Camaro 2SS/RS - K&N cai, Katech ported TB, GPI Ported/rod modded manifold, Texas speed 1 7/8 headers, HFC, Flowmaster 2 chambers with x pipe, Mishimoto CC, MSD wires, Roto fab washer relocation, DynoSteve tune, tru cool 40k trans cooler, apex scoop, heritage grill, jre dipstick mod

Complete street performance appointment booked - Cam, tsp CNC heads and converter.
Bigdumogre is offline   Reply With Quote
Old 04-19-2021, 03:29 PM   #12
TheFlyingBananaSS
Evil Genius of Chevrolet
 
TheFlyingBananaSS's Avatar
 
Drives: 2013 2SS, 2015 LaCrosse, 2017 Z06
Join Date: Feb 2017
Location: New York
Posts: 2,928
Quote:
Originally Posted by Bigdumogre View Post
Congrats on the new house.

Did CSP say anything since they just tuned the car?
I emailed them but just got the usual double talk from Alex. Strange dude.

I get the impression he thinks all people are stupid. Or maybe it's just me, I dunno.
__________________
GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.
TheFlyingBananaSS is offline   Reply With Quote
Old 04-19-2021, 03:31 PM   #13
TheFlyingBananaSS
Evil Genius of Chevrolet
 
TheFlyingBananaSS's Avatar
 
Drives: 2013 2SS, 2015 LaCrosse, 2017 Z06
Join Date: Feb 2017
Location: New York
Posts: 2,928
That's why I like ECS so much. I get to communicate with the owner every time. Perhaps this will be my future preferred shop for work.
__________________
GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.
TheFlyingBananaSS is offline   Reply With Quote
Old 04-19-2021, 03:40 PM   #14
Bigdumogre

 
Bigdumogre's Avatar
 
Drives: 2012 Camaro SS
Join Date: Dec 2019
Location: New York
Posts: 1,092
Quote:
Originally Posted by TheFlyingBananaSS View Post
I emailed them but just got the usual double talk from Alex. Strange dude.

I get the impression he thinks all people are stupid. Or maybe it's just me, I dunno.
Very strange - that sucks. Since they tuned the car they should figure this out.
__________________
2012 Camaro 2SS/RS - K&N cai, Katech ported TB, GPI Ported/rod modded manifold, Texas speed 1 7/8 headers, HFC, Flowmaster 2 chambers with x pipe, Mishimoto CC, MSD wires, Roto fab washer relocation, DynoSteve tune, tru cool 40k trans cooler, apex scoop, heritage grill, jre dipstick mod

Complete street performance appointment booked - Cam, tsp CNC heads and converter.
Bigdumogre is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:38 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2021, vBulletin Solutions, Inc.