Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Gen5DIY
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons


Reply
 
Thread Tools
Old 09-21-2018, 06:35 PM   #1
matts86cam
 
Drives: 1986 z28 and 2015 ss
Join Date: Apr 2016
Location: 54650
Posts: 44
using 2010-13ss borla axle back on 14-15 ss

Can anyone tell me the problems I will run into? It looks like (from the sales photos) the muffler to tips pipe might be at a different angle on the 13 ss from the 15 ss.
matts86cam is offline   Reply With Quote
Old 09-21-2018, 08:34 PM   #2
Coz3z3
 
Drives: 2015 1LE
Join Date: Feb 2017
Location: Nevada
Posts: 192
I would say that you are probably right since the whole rear changed in 14. I assume that the angles are probably slightly different. Couldn't tell you how much, but calling Borla on it might be the best answer for you.
Coz3z3 is offline   Reply With Quote
Old 09-21-2018, 09:19 PM   #3
zz430camaro

 
Drives: 67 camaro, 2015 1LE
Join Date: Oct 2015
Location: Parma, OH
Posts: 808
I would imagine if Borla has two different part numbers for the years then its different some how.
zz430camaro is online now   Reply With Quote
Old 09-21-2018, 10:15 PM   #4
matts86cam
 
Drives: 1986 z28 and 2015 ss
Join Date: Apr 2016
Location: 54650
Posts: 44
Already purchased it, anyone kmow for sure? Thanks for the replies guys.
matts86cam is offline   Reply With Quote
Old 09-21-2018, 10:25 PM   #5
rontammy0
Dr feelgood
 
rontammy0's Avatar
 
Drives: 2011 2SS/ RS INFERNO ORANGE L99
Join Date: Dec 2012
Location: Alliston Ontario Canada
Posts: 8,485
Quote:
Originally Posted by matts86cam View Post
Already purchased it, anyone kmow for sure? Thanks for the replies guys.
I found this link with the part number...if you scroll down to the bottom it says this system fits 2010 to 2013. Im looking for another part number...do you have the part number of the exhaust you bought?

https://www.tdotperformance.ca/borla...EaArMQEALw_wcB

Here is a S type for a 2014 or 15...different numbers..plus you need to let us know if its an Atak or Stype you have.

https://www.borla.com/products/camar...rt__11849.html
__________________


K@N Typhoon Cai
Vmax Ported Throttlebody
MSD Super Conducter plug wires
StainlessWorks1 7/8 longtube headers
391 gears
Cosra Exreme 3 inch catback exhaust.
Circle D 3200 stall converter
305 x 35 20 Nitto 555r drag radials
AGP Performance tuned
rontammy0 is offline   Reply With Quote
Old 09-22-2018, 08:01 AM   #6
matts86cam
 
Drives: 1986 z28 and 2015 ss
Join Date: Apr 2016
Location: 54650
Posts: 44
It is an atak. Not sure of the part numbers, it is a used setup from another member. I will be driving 3 hrs to pick it up. I will lay it out under the car to see what it looks like and update this thread once I attempt to put it on.
matts86cam is offline   Reply With Quote
Old 09-22-2018, 08:51 AM   #7
zz430camaro

 
Drives: 67 camaro, 2015 1LE
Join Date: Oct 2015
Location: Parma, OH
Posts: 808
My guess would be that the exhaust tips may not be in the right position so you might have to re-work them.
zz430camaro is online now   Reply With Quote
Old 10-05-2018, 07:05 PM   #8
matts86cam
 
Drives: 1986 z28 and 2015 ss
Join Date: Apr 2016
Location: 54650
Posts: 44
The hangers lines up and the tips work fine. They are angled out a little bit but noone would ever think it didnt look right. The tips arent flush with the bumper cover but the uniformity between the two make it work and seem like a look you are going for. Cant speak about the rest of the Kit but the mufflers worked out fine.
matts86cam is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:10 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.