12-29-2016, 08:22 AM | #99 |
Drives: 2017 Camaro 2.0T M6 RS sunroof Join Date: Oct 2016
Location: Miami
Posts: 70
|
Can someone make a DIY video on this I would really like to lay down I had to drive this with a buddy of mine for 20+hr road trip and it really sucked not being able to lay down especially for passenger... I'm really interested in doing this
|
03-17-2017, 11:59 AM | #100 |
Drives: SS-6-SPD Join Date: Jan 2017
Location: New Jersey
Posts: 1,364
|
bumping old thread because this is GOLDEN!!! i one thing that bothered me ...
can someone post a DIY video? i'll probably do this in the summer time.. |
03-17-2017, 10:50 PM | #101 |
Soon to be Millionaire
Drives: Blue 2016 Camaro Join Date: May 2016
Location: Gainesville, FL
Posts: 379
|
Same, I'd really like to do this so that I can take naps while parked.
__________________
I run a Drone Service Company in Gainesville, FL - Please visit my site and take a look |
04-04-2017, 01:18 PM | #102 |
Banned
Drives: 17 SuperSport Camaro 6 on the Flo' Join Date: Feb 2016
Location: USA
Posts: 1,507
|
|
04-07-2017, 07:45 AM | #103 |
|
Godsend. Glad someone found this, I've gotta pull the seats and get those stops drilled out. It was the only significant gripe I've had about the car.
__________________
2017 ZL1 A10 2017 2SS M6: (SOLD) || 2014 2LT Convertible: (SOLD) || 2010 2LT M6 Supercharged:(SOLD) || 1987 IROC-Z 5.0 M5: (SOLD) |
04-10-2017, 06:42 AM | #104 |
Drives: 2017 Camaro 2.0T M6 RS sunroof Join Date: Oct 2016
Location: Miami
Posts: 70
|
|
04-26-2017, 03:23 PM | #105 | |
Sellin Chevy's since '06
|
Quote:
__________________
'19 Z06-7Speed and lowered on stock bolts
'02 Z28-Kooks true dual headers/TSP heads&cam/full suspension & Kmember sub40K orig miles. https://youtu.be/h6faSdcvNew TRADED!'17 ATS-V Coupe w/ Carbon Black pkg https://youtu.be/GH_t-R-TJV0 SOLD! '18 ZL1 Mosiac Blk SOLD!'16 SS Sedan-Forgestars/ARH/rotofab TRADED!2014 SS Sedan SOLD! 2013 Blue Ray1SS/1LE 1of20. TRADED! 2012 White 1SS/RS |
|
05-17-2017, 01:58 PM | #106 |
Edit now 5th Camaro
Drives: 2016 2SS Join Date: Jul 2010
Location: Charlotte NC
Posts: 225
|
bump for video or pics
__________________
1995 V6 First Car - Sold
2000 Z/28 11.12 @ 125mph Sold 2000 SS - Sold 2001 ZO6 - Sold 2010 Camaro SS Sold AEM Intake / 1" Drop / Forgeline / TSP Headers / AMT Catback / 20% Tint Current Whip 2016 2SS Hyper Blue! |
07-12-2017, 11:45 PM | #107 |
Drives: '15 M3 Join Date: Jun 2017
Location: DMV
Posts: 10
|
Another bump for video or pics. Would really like an extra few degrees of recline. Help!!
|
07-13-2017, 11:21 AM | #108 |
Drives: 2016 Camaro 2SS Join Date: Apr 2017
Location: Stansbury Park, Utah
Posts: 1,092
|
I did it on the passenger side. I didn't do a video because I knew it'd get ugly.
I did not remove the seat. 1. I removed the plastic on the bottom of the seat where the power switches are. The front wasn't too bad as you could get your head down in the footwell and see the screw. The rear screw was a different story. Very hard to see. 2. Anyways, next was to unzip the leather seat cover and slide it up to get it out of the way. 3. This exposed the weld that needs to be ground away. So I started grinding away until it was close to flush with the metal. Then I drilled a hole to the side of the stop. Then drilled a little bigger hole and I could see the stop to the left of the hole. I stuck a screwdriver in there and pried it and it broke free. Then it fell....never be seen again. 4. That was not the end. It still didn't work as there's a stop on the right side of the seat. This is where I took the advice from this thread and sat in the seat, powered it back and once it stopped, I leaned back (holding the button) with all my weight and it broke free. 5. Still not done. The seat was still not 100% yet. it didn't move forward. So, more coercing forward and backward a few times and it finally freed up and works smoothly now. Who knows where the other stop went. I think whats happening on the left side (the side that wasn't drilled out) is that when you lean back and break it free...it only breaks the stop 1/2 way. Then when you move the seat forward, you catch the stop again, but its weaker now. You force it forward and it breaks clean off. Again, nowhere to be found. lol
__________________
2016 2SS, MRC, NPP, A8. Procharger P-1X,Stage II,std bypass, 3.9, Alky Meth - 10.84 @129 - DA+2000
New Mods - GPI drop ins, Kooks 2", LT4 fueling, Cam, Circle D Converter, 3.5 pulley & dual nozzle meth. |
07-17-2017, 07:51 AM | #109 |
Drives: 2017 Camaro 2.0T M6 RS sunroof Join Date: Oct 2016
Location: Miami
Posts: 70
|
Aw man should have took some pics or something sounds good congrats on opening that up still one of my most annoyed things with car ... One day I'll tackle the project but not yet as I'm not100% on process visual learner... Lol
|
09-25-2017, 02:55 PM | #110 |
Drives: 2016 SS Hyper Blue w/ pearl Join Date: Feb 2010
Location: Moses Lake
Posts: 12
|
passenger seat recline.....
my passenger seat does not recline but maybe 2" also, I"ve had it into the dealer 2'xs and they say nothing is wrong with it. But my 2010 seat reclined so the passenger could rest, this one, I can't take the camaro out of town with a passenger because of the seat. So frustrating, I want to know if it's normal, and why would they do that at GM?
__________________
|
03-02-2018, 05:45 AM | #111 |
Drives: Hyper Blue 2016 Camaro turbo Join Date: Aug 2016
Location: miramar
Posts: 183
|
I read part of this thread a while back early last year but now that i have my passenger seat removed to install my leather seat covers, i can not view the pics on how to fully recline the seats. Can someone tell me which pin to drill out? From this pic bellow
|
03-02-2018, 05:46 AM | #112 |
Drives: Hyper Blue 2016 Camaro turbo Join Date: Aug 2016
Location: miramar
Posts: 183
|
|
|
|
Post Reply
|
|
|