01-10-2011, 08:06 PM | #1 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
OE Quiet Endlinks with Spherical Function
Spherical endlinks have been a staple on race cars for years. Spherical endlinks are not perfect. They are either noisy when you bolt them on or will become noisy after you use them. The range of motion can also cause issues with your setup.
Pedders new endlinks use a unique process. Unlike a traditional cast ball and stud, Pedders endlink ball joint starts life as a ball bearing. The stud is friction welded to the ball bearing. There are NO bolts. The housing is a precision casting with an extreme high temperature epoxy coating for a virtually perfect fit. For OE, Xa coilovers and brand-x coilovers order CAMENDLINKKIT1 For Supercar coilovers order Camaro Endlink Kit Supercar Camaro Rear The function is far better than thje lame picture I have on my laptop. There are better pictures available in out catalog, but I'll get a better one up when I am back in the office. This just in from PRI GM and Pedders? No, Pedders does not make the GM Race Endlink. Pedders and GM do use the same ball joints. Two Great Great Companies Thinking the Same Way. Last edited by JusticePete; 09-26-2013 at 12:10 PM. Reason: Better Picture Inserted |
01-11-2011, 12:12 PM | #2 |
Drives: 2010 Camaro 1SS Join Date: Aug 2009
Location: Lawton/Fort Sill, OK
Posts: 1,632
|
Those front endlink rods do not look any beefier than stock or is it just a bad pic?
__________________
2010 Camaro 1SS Inferno Orange Magnusson Supercharger Installed and Tuned by ADM Performance, Roto Fab CAI IOM painted, MBRP Cat Back Exhaust, Barton Industries Short Shifter, Clear Image Headers, Pedders coilovers, BMR Front/Rear sway bars Trailing Arms and End Links, VMax ported TB
|
01-12-2011, 02:26 AM | #3 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
|
01-12-2011, 10:17 AM | #4 |
Drives: 2015 Camaro Z28/2016 Jeep Sahara Join Date: Mar 2010
Location: South Florida
Posts: 544
|
Will these work with Pfadt sway bars?
__________________
2015 summit white Z28 #120 TRK DAY
-Sun-Tek PPF-C protection film on 2/3 of the car, Moreno Camber plates, American Racing 2" ceramic coated LT headers and X-pipes with No Cats, Taylor red performance wires, NGK plugs, BTR Stage III Cam, MSD Atomic intake, Nick Williams 102mm throttle body, Stage 2 CNC Ported Heads by WCCH, MGW short throw shifter, oil catch can, and a dyno tune to get me to 587 RWHP and 516 RWTQ GONE: 2013 Summit White Camaro ZL1 M6 Roto-Fab CAI, Kooks headers and CAT delete, ATI damper and 10% pulley and balancer! Results: 576 RWHP - 540 RWTQ |
01-12-2011, 10:48 AM | #5 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
|
01-12-2011, 02:39 PM | #6 |
Installed the Pedders bars and these end links last weekend, huge improvement, and they are quiet as advertised. I did have issues with the lack of instructions included with the parts, and the incomplete ones on Pedder's website... One example is these end links don't require drilling the existing mounting holes on the car as described in the online instructions, didn't discover that until after drilling. Good product though.
__________________
2010 SIM SS, 6spd Man, Pedders Sway's & End Links, JBA cats, CAI, MGW shifter, SLP Skip Shift, COR F1 Precise Monobloc, 20X9 & 20X11. Pfadt Coilovers, BMR Subframe bushing inserts, BMR rear trailing arms, Pedders Front Radius Rod inserts.
|
|
01-12-2011, 03:42 PM | #7 |
Drives: His Wife Crazy Join Date: Jan 2008
Location: Silas Deane Auto,CT Name: Rob Anderson
Posts: 1,789
|
i've added these new parts to our site,
|
01-12-2011, 04:47 PM | #8 |
Drives: 2011 Camaro LT Join Date: Jun 2010
Location: Jacksonville, FL
Posts: 575
|
will replacing this part quiet some of the odd noises that our Camaro makes? . I'm newbie with cars..just wanted to know what this does.
|
01-12-2011, 05:00 PM | #9 |
Drives: His Wife Crazy Join Date: Jan 2008
Location: Silas Deane Auto,CT Name: Rob Anderson
Posts: 1,789
|
it's a replacement link that will be stronger than the stock links area, but typically not going to something that you replace to make the car quieter if it's still stock suspension wise.
The available aftermarket parts have been known to make noise, this hasn't been the case with the Pedders links, these are just as quiet as stock, but are much stronger. |
01-12-2011, 05:17 PM | #10 | |
Drives: - Join Date: Sep 2007
Location: West Michigan
Posts: 53
|
Quote:
Regards, Dan
__________________
Dan Morris
|
|
01-12-2011, 05:18 PM | #11 |
Drives: His Wife Crazy Join Date: Jan 2008
Location: Silas Deane Auto,CT Name: Rob Anderson
Posts: 1,789
|
Dan's the man...
that can arrange for your larger studs, lol |
01-12-2011, 05:32 PM | #12 | |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Quote:
Upgrading to Pedders high efficiency endlinks: for stronger more durable ball joints. to improves sway bar function. for corner weighting adjustable length endlinks are essential. are an excellent replacement for anyone tired of the noise from spherical endlinks. Overall the Camaro is an exceptionally quiet car. Tell us about your noises. |
|
01-13-2011, 08:46 AM | #13 |
Dan is the man!!! That's really awesome, thank you, great service!!!
__________________
2010 SIM SS, 6spd Man, Pedders Sway's & End Links, JBA cats, CAI, MGW shifter, SLP Skip Shift, COR F1 Precise Monobloc, 20X9 & 20X11. Pfadt Coilovers, BMR Subframe bushing inserts, BMR rear trailing arms, Pedders Front Radius Rod inserts.
|
|
01-14-2011, 02:23 PM | #14 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Better Pictures Part #1
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
5th Gen Suspension -- The Book | JusticePete | Suspension / Brakes / Chassis | 151 | 05-07-2015 05:52 PM |
Engine sounds so quiet | jagan323 | 5th Gen Camaro SS LS LT General Discussions | 15 | 04-13-2010 11:22 PM |
Pfadt Racing new Camaro Endlinks available NOW! | PfadtRacing | Suspension / Brakes / Chassis | 28 | 03-22-2010 12:00 PM |
LM Performance, Spohn Camaro 2010 Tubular Rear Trailing Arms w/ Spherical Rod Ends | LMPerformance | V8 Bolt-Ons & Tunes | 0 | 10-19-2009 01:59 PM |
LM Performance, Spohn Camaro 2010 Tubular Rear Toe Links with Spherical Rod Ends. | LMPerformance | V8 Bolt-Ons & Tunes | 0 | 10-19-2009 01:44 PM |