Heritage Grille Installed - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

68vert · 05-14-2010, 09:06 PM

I like it with just the SS personally.
The SS emblem has 2 'tabs' coming out of the back. With a sharp blade and a heating iron you can fashion a backing plate for these tabs.

jsharp · 05-14-2010, 09:20 PM

love this grille. I am deff gonna have to shell out the money for one!

sscamaro · 05-15-2010, 10:32 AM

Her are some new pictures.

CaniacFan · 05-15-2010, 10:55 AM

Quote:

Originally Posted by sscamaro

Her are some new pictures.

Looks great. Very "clean" looking. Is this the "unpainted" version of the grille? If left unpainted, does it match the lower pirce of grille (facshia)? IMO, I'd leave the bow tie off and go with just the "SS" badge, just me though. Lori

sscamaro · 05-16-2010, 09:50 AM

Quote:

Originally Posted by CaniacFan

Looks great. Very "clean" looking. Is this the "unpainted" version of the grille? If left unpainted, does it match the lower pirce of grille (facshia)? IMO, I'd leave the bow tie off and go with just the "SS" badge, just me though. Lori

The part that surrounds the black grille is painted red. the part that goes over the parking lights is painted black. When it comes from GM it isn't painted, it is either black or gray.

Savage76 · 05-19-2010, 04:28 PM

How hard is it to change over the SS or RS badge?

sscamaro · 05-20-2010, 10:52 AM

Quote:

Originally Posted by Savage76

How hard is it to change over the SS or RS badge?

The place I got the grille from also has the SS & RS to put on it without any fuss.

Savage76 · 05-21-2010, 01:43 PM

Quote:

Originally Posted by sscamaro

The place I got the grille from also has the SS & RS to put on it without any fuss.

Thanks, I'll see if the dealership has it, thats where I got mine at.

sscamaro · 05-21-2010, 04:25 PM

Quote:

Originally Posted by Savage76

Thanks, I'll see if the dealership has it, thats where I got mine at.

The dealership won't have it. I got it from www.cleancutcreations.com

Click on pic for close up shot.

DaddySS · 05-21-2010, 04:35 PM

Looks great Ralph!

nalinc23 · 05-22-2010, 09:25 AM

Can we get more pictures of everyone's Heritage Grills? I am definitely getting one but undecided about paint and emblems....

mkeeler · 05-26-2010, 12:29 PM

Did mine this weekend. The instructions leave out 4 bolts you need to remove but if you are mechanically inclined you will notice them right away (hint: there are 2 on each side inside the wheel well near the side light/reflector. On the one the nut is welded on so don't try to remove the nut). Also, you need a star headed wrench for some of the screws (can't remember the size) which is not mentioned in the instructions. Also with the scivets don't use a traditional trim tool - I trashed some of mine that way. Just use a screwdriver by inserting it in the flat slot in-between the two pieces of plastic (each scivit is two pieces the center round pin and outer round shell that looks like a washer when installed). Then pry-pop the center part out and then the second part will just pull out. Install in reverse order. Using a trim tool ruins them. It took about an hour and a half being really careful. Well worth the look. I epoxied a new SS logo on.

Wingnut · 05-26-2010, 12:57 PM

Installed mine and love it. Still debating on reinstalling the "SS". Good for now

05-14-2010, 09:06 PM	#29
68vert Drives: 2010 SIM SS/RS, 1968 RS convertible Join Date: Sep 2008 Location: Wilmington, NC Posts: 744 View My Garage	I like it with just the SS personally. The SS emblem has 2 'tabs' coming out of the back. With a sharp blade and a heating iron you can fashion a backing plate for these tabs. Attached Images __________________ 2010 SIM SS/RS see garage for mods

05-14-2010, 09:20 PM	#30
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	love this grille. I am deff gonna have to shell out the money for one! __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

05-15-2010, 10:32 AM	#31
sscamaro Drives: 2010 2SS, 2017 Silverado LTZ Join Date: Jan 2007 Location: Denver,PA Posts: 3,195 View My Garage	Her are some new pictures. __________________ 2010 2SS/RS Victory Red, MN6, 1-7/8 Kooks LT Headers, SLP Axle Back, Edelbrock E-Force S/C, ZL1 Fuel Pump, 72# Injectors, JRE fuel rail upgrade, Roto-Fab CAI, Elite Catch Can, Billet Hurst Shifter, DSS 1000HP axles, Spohn Trailing Arms, Toe Links, Lower Control Arms. Chrome American Racing Torq-Thrust wheels. 546/rwhp & 522/rwtq & 10.9# boost Tune by Jeremy Formato.

05-22-2010, 09:25 AM	#39
nalinc23 Drives: 2010 2SS/RS 6MT Join Date: Dec 2009 Location: Savannah, GA Posts: 258	Can we get more pictures of everyone's Heritage Grills? I am definitely getting one but undecided about paint and emblems.... __________________ '10 2SS/RS 6MT, Silver Ice Metallic/Black, CAI Inc Intake, Magnaflow 3'' Catback Exhaust 16483, Llumar 35% Tint, Headlight Armor 20% for Fog/Side/Tail Light Lenses

05-26-2010, 12:29 PM	#40
mkeeler Drives: 2010 Camaro SS2 RS Bumblebee Join Date: Mar 2010 Location: Rochester, NY Posts: 92	Did mine this weekend. The instructions leave out 4 bolts you need to remove but if you are mechanically inclined you will notice them right away (hint: there are 2 on each side inside the wheel well near the side light/reflector. On the one the nut is welded on so don't try to remove the nut). Also, you need a star headed wrench for some of the screws (can't remember the size) which is not mentioned in the instructions. Also with the scivets don't use a traditional trim tool - I trashed some of mine that way. Just use a screwdriver by inserting it in the flat slot in-between the two pieces of plastic (each scivit is two pieces the center round pin and outer round shell that looks like a washer when installed). Then pry-pop the center part out and then the second part will just pull out. Install in reverse order. Using a trim tool ruins them. It took about an hour and a half being really careful. Well worth the look. I epoxied a new SS logo on. __________________ All that evil needs to triumph is for good men to do nothing. (Oh, and DRIVE IT LIKE YOU STOLE IT!) Rally Yellow, Black Stripes and Ground Effects, 20" Polished Aluminum Rims, MGW Shifter, Custom Engine Cover, K&N CAI Series 69 Typhoon, Borla Exhaust, Tinted Windows, Heritage Grille, Subwoofer system, Trunk Mat, Trunk Organizer, UltraShield Clear Vinyl, Camaro SS license Plate Covers, "BY BY" Personalized Plates.

05-19-2010, 04:28 PM	#34
Savage76 Drives: 2010 Red Jewel LT1 RS Join Date: May 2010 Location: Rochester, NY Posts: 51 View My Garage	How hard is it to change over the SS or RS badge?

05-21-2010, 04:35 PM	#38
DaddySS Kept The Faith Drives: 2011 Camaro SS Convertible Join Date: Jan 2007 Location: Bergen County, New Jersey Posts: 418	Looks great Ralph!

05-26-2010, 12:57 PM	#41
Wingnut GOT IT....LOVE IT!!! Drives: 2010 2SS, Silver Ice Join Date: Jan 2009 Location: San Antonio Posts: 193	Installed mine and love it. Still debating on reinstalling the "SS". Good for now Attached Images __________________ 2SS, Silver Ice......delivered June 10th!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bowtie Modification for the Heritage Grille with SS emblem	cerberus	Cosmetics and Lighting Modification Discussions	19	11-08-2011 08:26 AM
Phantom Grille VS Heritage grille, pro's cons	racer778	Cosmetics and Lighting Modification Discussions	24	04-21-2010 08:00 AM
Heritage grille emblem options?	Ringo	Cosmetics and Lighting Modification Discussions	43	04-19-2010 02:45 PM
RJT Painted Heritage Grille Installed	RedJewel2SS	Camaro Photos \| Spyshots \| Video \| Media Gallery	41	03-08-2010 09:37 PM
New Style SS Emblem Kit For Heritage Grille From CCC	CleanCutCreations	Exterior Parts & Accessories	22	02-25-2010 05:56 PM