08-19-2016, 07:52 AM | #1 |
Drives: White 2016 camaro ss M6 npp Join Date: Jun 2016
Location: Johnston RI
Posts: 88
|
AFe power lowering springs clunking after install
So last night me and a couple of my friends installed the afe lowering springs 1.25 front and 1.5 rear and the stance looks great but when going over bumps i can hear a chlunking noise was wondering if anyone else had an issue like this it seems to be only coming from the passenger rear side
|
08-19-2016, 07:58 AM | #2 |
Drives: 2016 Corvette Z06 M6 Join Date: May 2009
Location: Odenton, MD
Posts: 874
|
I was gonna say you might not have the rears seated correctly
__________________
2013 Dodge Viper #44/150 Launch Edition IG:@absoluthank
20/21 BC Forged Wheels : BC Coilovers: TA Aero |
08-19-2016, 08:02 AM | #3 |
Drives: White 2016 camaro ss M6 npp Join Date: Jun 2016
Location: Johnston RI
Posts: 88
|
Thanks for the reply would you recomend reinstalling it
|
08-19-2016, 08:05 AM | #4 |
マスタング = 遅い
Drives: 2017 Chevrolet Camaro SS 1LE Join Date: Aug 2015
Location: Florida
Posts: 7,061
|
Did you index all the bolts properly after install?
|
08-19-2016, 08:15 AM | #5 |
Drives: White 2016 camaro ss M6 npp Join Date: Jun 2016
Location: Johnston RI
Posts: 88
|
No i was planing on having the shop that is doing my alignment do it for me do you think that could be causing the clunking its only on one side in the rear
|
08-19-2016, 09:16 AM | #6 |
マスタング = 遅い
Drives: 2017 Chevrolet Camaro SS 1LE Join Date: Aug 2015
Location: Florida
Posts: 7,061
|
|
08-19-2016, 10:45 AM | #7 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
i had the first set on my car and no clunking here but i also have headers and exhaust so i dont here much lol
|
08-19-2016, 12:01 PM | #8 |
Drives: White 2016 camaro ss M6 npp Join Date: Jun 2016
Location: Johnston RI
Posts: 88
|
I just looked under the car to check to see if the spring wasnt lined up but everything looked good and i also loosened and retightened all the bolts i will let you guys know how i make out
|
08-19-2016, 12:55 PM | #9 |
Defending the Nation...
Drives: '16 Summit White 2SS, A8, Sunroof Join Date: Dec 2009
Location: Long Beach, MS
Posts: 443
|
That spring looks super compressed, almost to the point of no travel whatsoever. Are the others like this too???
__________________
'16 2SS, A8, Sunroof, non-NPP "SURSUM AB ORDINE" |
08-19-2016, 01:25 PM | #10 |
Drives: White 2016 camaro ss M6 npp Join Date: Jun 2016
Location: Johnston RI
Posts: 88
|
Yes they do look very compressed but that is what they looked like before they were on the top portion of the spring is by design more compressed than the bottom portion do you think spring insulators would help
|
08-19-2016, 05:42 PM | #11 |
Drives: White 2016 camaro ss M6 npp Join Date: Jun 2016
Location: Johnston RI
Posts: 88
|
Thanks good to here from you guys at afe will be getting an alignment tomorrow was wondering if this looks good or if you see anything wrong
|
08-19-2016, 06:42 PM | #12 |
Drives: White 2016 camaro ss M6 npp Join Date: Jun 2016
Location: Johnston RI
Posts: 88
|
So update on thei situation i just untightened and retightened all the bolts again and the clunks are gone and the car ride great thanks afe for the support all she needs is an alignment
|
08-19-2016, 07:08 PM | #13 |
LawBraker
Drives: 10 SIM 2LT/RS & 2016 1SS Hyper Blue Join Date: Oct 2008
Location: Fresno, CA.
Posts: 910
|
Do you offer these springs in silver?
__________________
|
08-23-2016, 02:08 PM | #14 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
the orange is a nice color and once they are installed you cant see it anyways! swaybars are the same color as well!
|
|
|
Post Reply
|
|
|