10-21-2018, 10:24 PM | #1 |
Drives: 2018 NFG ZL1-1LE Join Date: Jun 2018
Location: Near the water
Posts: 304
|
Custom coil covers
Hello All,
Does anyone know the part number or a place to get stock replacement coil covers? I’m talking about the black plastic covers on the left and right sides of the engine over the valve covers. I see a few people doing custom colors to the super charger lid or swapping that out all together. I like the stock one so I will leave that alone. I have a though of making the coil covers red but don’t want to modify the originals. I have been unable to locate a company selling ones already done or some aftermarket versions. I don’t want carbon fiber. I think the red covers will give the engine bay a little detail while not being over done. It will also tie the engine compartment in with the red seat belts and calipers. My plan is to get a new set and paint those. This way I can always go back to original if I so desire. Thanks for the help, Rod |
11-09-2018, 08:31 PM | #2 |
Drives: 2018 NFG ZL1-1LE Join Date: Jun 2018
Location: Near the water
Posts: 304
|
So... I was not able to find any aftermarket company doing coil covers for the LT4 in the Camaro. I ended up ordering a set from my local dealer. Sent them to my friend’s body shop and had them painted to match the calipers. I think this came out exceptionally well. The engine compartment needed something to tie it into the rest of the car and give it a bit of flare without looking overly done.
|
11-09-2018, 09:10 PM | #3 |
Who Needs to KNOW?
Drives: 18 ZLE Join Date: May 2018
Location: Left Side of the Moon
Posts: 1,771
|
totally thought that said coil overs !
__________________
ing for grip.
Are you in the NY/NJ/PA/CT region? Join us for autox fun at MetLife Stadium. HUGE lots, tons of runs. http://www.motorsportsne.com/ |
11-09-2018, 09:36 PM | #4 |
Drives: 2018 NFG ZL1-1LE Join Date: Jun 2018
Location: Near the water
Posts: 304
|
Thank you for the input but those are valve covers. I was after a set of the plastic covers over the coils. I found plenty for corvettes but none for the Camaro.
|
11-10-2018, 06:42 AM | #5 |
Drives: 69 GTO, 05 GTO, 2018 Silver ZL1 Join Date: Jan 2012
Location: Springfield, OH
Posts: 847
|
Sorry...I think all Lt4 covers fit!
|
11-10-2018, 08:26 AM | #6 |
Oh Oh it's Friday Night!
Drives: 2018 ZL1 1LE Nightfall Gray Join Date: Jan 2018
Location: Walton Woods
Posts: 1,061
|
I think Vengeance racing has them. They have the Vengeance name on them. They look good.
__________________
2018 Camaro ZL1 1LE NFG; ARH 2” headers, catless mids, ARH full exhaust, Lingenfelter 18% lower pulley, ATI Harmonic Balancer, Roto-fab CAI, EE-catch can, TM ported TB, NX Lid, BMR strut tower brace. Aeroforce dual pod interceptor gauges. Tuned by Vengeance Racing!!! 644 HP @ 6250 rpm / 689 trq @ 3660 rpm
Four that wanna own me Two that wanna stone me One says she's a friend of mine... |
11-10-2018, 08:49 AM | #7 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
|
11-10-2018, 09:15 AM | #8 |
Coupe Newbie
Drives: 2017 ZL1, 2021 Corvette Convertible Join Date: Jul 2011
Location: Columbus, Ohio
Posts: 3,283
|
Nope. The Z06 coil covers are different from the ZL1 covers because of the dry vs wet sump.
__________________
|
11-10-2018, 11:04 AM | #9 |
Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017
Location: Nolensville, TN
Posts: 618
|
Look up Katech, they've got a pretty sweet valve cover/coil relocation kit.
__________________
1989 Forumla 350 WS6 <- High School
2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily |
11-10-2018, 11:07 AM | #10 |
Drives: 2017 Camaro ZL1 Join Date: Aug 2018
Location: Bel Air, MD
Posts: 319
|
|
06-23-2019, 02:23 PM | #11 |
Drives: 1968 Camaro and 2019 ZL1 Join Date: May 2019
Location: CA
Posts: 51
|
I have a 2019 ZL1. Is there anyone that sells the stock coil covers for it besides the dealer? I want a pair to have custom painted.
|
06-23-2019, 03:01 PM | #12 |
Drives: 2018 NFG ZL1-1LE Join Date: Jun 2018
Location: Near the water
Posts: 304
|
I wasn’t able to find them except for the dealer or a GM supplier online. I was able to get mine painted at a local body shop. Went with red to tie in the red calipers and seat belts.
Last edited by Rnovrit; 06-23-2019 at 08:17 PM. |
06-24-2019, 11:09 AM | #13 |
army life
Drives: 2018 hyper blue zl1 Join Date: Feb 2011
Location: clarksville, tn
Posts: 868
|
Covers
I have my stock ones I replaced with carbon fiber ones. Not sure what they sell for new but make me a fair offer and you can have mine if shipping don’t kill me lol
__________________
Mods: lingenfelter 15% overdrive pulley, ATI balancer, kooks headers, DSX low side aux pump, DSX flex fuel, GPI stage 2 cam, trans tune, cat delete, rear seat delete, rotofab cai
|
06-24-2019, 12:32 PM | #14 |
Drives: 2018 ZL1 M6 Join Date: May 2019
Location: York, PA
Posts: 49
|
|
|
|
Post Reply
|
|
|