01-21-2011, 08:56 PM | #1 |
Straight Performance Racn
Drives: Anything over 600rwhp Join Date: May 2010
Location: Baton Rouge, Louisiana
Posts: 211
|
SPR 2011 Vortech V3 build
This is the SPR 2011 LS3 build from the bolt on section,well its now Vortech Equipped!!! Just a recap of the mods done to this car JRE smooth idle cam, Dynatech 1 7/8 headers with cats (which is now gutted) 2 1/2 borla touring exhaust, Vortech V3, FAST 65lb injectors and Lonnies Performance drop in dual pumps. We have the rx catch can on order along with another mod which im sure ted will elaborate on at a later date. All of the work performed on this build is by Straight Performance Racing and the tuning duties is handled by Ted Jannetty. The numbers you see is only at 8.5psi with only 10degrees of timing thanks to some bad gas and the knock sensor catching it thus the 10degrees. We will be redynoing it next week with better pump gas along with the catch can and the afore mentioned ted mod, the 8.5 psi will remain the same as its super safe at this boost level. Hope you enjoy!!!
Before. What Intercooler Vortech Equipped The NUMBERS!!! |
01-21-2011, 10:56 PM | #2 |
Drives: 99 Camaro; 2010 Camaro 2SS/RS Join Date: Nov 2009
Location: louisiana
Posts: 1,966
|
when will we see it at the track?
|
01-21-2011, 11:01 PM | #3 |
|
looks awesome
__________________
Jannetty Racing JRE Street Package
|
01-21-2011, 11:20 PM | #4 |
Straight Performance Racn
Drives: Anything over 600rwhp Join Date: May 2010
Location: Baton Rouge, Louisiana
Posts: 211
|
|
01-21-2011, 11:21 PM | #5 |
Straight Performance Racn
Drives: Anything over 600rwhp Join Date: May 2010
Location: Baton Rouge, Louisiana
Posts: 211
|
|
01-22-2011, 01:39 PM | #6 |
Drives: 2ss rs M6 Join Date: Oct 2010
Location: baton rouge la.
Posts: 66
|
Get job SPR alot of hard comes into these builds it's not connect da dots.Super safe tune great #s and only 10 degrees of timing NICE. We all look at dyno #s and that's cool great for tuning and all,but just think how that thing is going to feel on the street (but dyno).!!!!!!!!
|
01-23-2011, 02:33 AM | #7 |
|
I HATE YOU!!!
just kidding welcome to the jannetty family. So jealous you got a cam.. Stealthed your intercooler. Looking to have people find out your mods the hard way?
__________________
2015 Corvette Z06.. Lime Rock Park 1:01; Watkins Glen 2:14; Thompson Speedway 1:21
|
01-23-2011, 08:53 AM | #8 |
Drives: 2010 Camaro 2SS Supercharged YSI Join Date: Dec 2010
Location: Baton Rouge, La
Posts: 174
|
SPR Baddest 2010 Camaro SS
We always paint the intercooler but the beast aint out yet just stay tune over 1000rwhp
|
01-23-2011, 10:44 AM | #9 |
Straight Performance Racn
Drives: Anything over 600rwhp Join Date: May 2010
Location: Baton Rouge, Louisiana
Posts: 211
|
Thanks alot bro, these cars pick up a lot with a cam more alone with a blower on top or in this case on the side. We like the stealth look on this side of the woods
|
01-23-2011, 04:16 PM | #10 |
vortech
GREAT NUMBERS GOOD JOB
|
|
01-24-2011, 07:37 PM | #11 |
Drives: 2011 Camaro SS 6speed Manual Join Date: Sep 2010
Location: Baton Rouge, LA
Posts: 128
|
I must say the work and knowledge that I received on this build from SPR(Straight Performance Racn) is incredible. The entire combination of parts(cam, headers, fuel injectors, dual fuel pump,etc) selected by SPR are working together in harmony!!!!! This thing drives smooth like a cadillac but oh boy, when you give it gas it turn heads like you wouldn't believe. The throttle response is amazing and to say that it dynoed 638RWHP with only 8.5 pound of boost and 10 degrees of timing and NO METH KIT, WOW!!!!!! Now I will eventually get one only for safety reasons down the road but the 638RWHP was achieved without it. I'm patiently waiting to see what it will do when we fine tune everything once this MAF sensor arrives and timing is adjusted accordingly. The tune on this car was by TED of Jannetty Racing who has also done a good job.
|
01-26-2011, 02:42 PM | #12 |
Drives: 16 Camaro SS, 06 C6 Z06, 15 Sierra Join Date: Nov 2009
Location: Murrieta, CA
Posts: 778
|
i like the clear knock retard that you can see mid pull on the dyno graph....
|
01-26-2011, 04:39 PM | #13 |
Straight Performance Racn
Drives: Anything over 600rwhp Join Date: May 2010
Location: Baton Rouge, Louisiana
Posts: 211
|
Yes you most definately can we plan on fixing that on friday. Will post the new graph then.
|
01-26-2011, 04:58 PM | #14 |
5Th Gen (Craig)
|
Nice looking build and great numbers
I can't wait to see it in person at one of our Cajun Camaro Club Cruise events.
__________________
2014 C7
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Supercharger / Turbocharger Results (INFO) Thread | radz28 | Forced Induction - V8 | 273 | 08-15-2023 04:44 PM |
My NEW VORTECH | ZuluKilla8 | Forced Induction - V8 | 13 | 10-04-2010 11:38 AM |
Think about this and the Z28 5th gen | 13F20 | Camaro ZL1 Forum - ZL1 Specific Topics | 41 | 09-04-2010 12:59 AM |
Vortech Supercharger Systems for 2010 Camaro Official Release | Brian@Vortech | Forced Induction - V8 | 98 | 02-19-2010 11:04 PM |