05-16-2013, 11:12 AM | #1 |
Drives: 2012 Ashen Grey LS-3 RS/2SS Coupe Join Date: Jan 2013
Location: Saratoga Springs, NY
Posts: 118
|
Suweeeet.
Seeing how the stock interior lighting is horrible, I went with the Phaztek aqua dome/floor package. For around $200 for the lighting and installation, this is one of the best mods I've done yet! I had it installed to a switch so I can control the lighting yet wired to the ignition so when I turn the car off, the lights will go off in case I forget...... I think it really "lights" up the interior...no pun intended!
__________________
2012 AGM LS-3 RS/SS: Airaid CAI, Ceramic Coated Dynatech SuperMaxx LT Headers, High Flow Cats, Borla "S-Type" Cat-Back Exhaust, Ted Jannetty Tuned, LS-3 Cowl Badging, RS/SS Fender Badging. Custom Bow-Ties by Lupe
|
05-16-2013, 11:41 AM | #2 |
boost+v6=me=:)
|
go to autozone but 12 inch strips for like ten $ does same thing for under 30$ total not hard
__________________
http://www.camaro5.com/forums/showthread.php?t=185528
435.7 RWHP 405 RWTQ JUST A LITTLE V6... Try me |
05-16-2013, 11:56 AM | #3 | |
Drives: 2012 Ashen Grey LS-3 RS/2SS Coupe Join Date: Jan 2013
Location: Saratoga Springs, NY
Posts: 118
|
Quote:
Yea, I saw those at Auto Zone. I can barely change a light bulb so I wasn't about to tackle this! I did do my CAI by myself and was very proud. Me not very handy.
__________________
2012 AGM LS-3 RS/SS: Airaid CAI, Ceramic Coated Dynatech SuperMaxx LT Headers, High Flow Cats, Borla "S-Type" Cat-Back Exhaust, Ted Jannetty Tuned, LS-3 Cowl Badging, RS/SS Fender Badging. Custom Bow-Ties by Lupe
|
|
05-16-2013, 12:25 PM | #4 |
Man, I'm not either but this mod was a breeze. Got it all for free when I bought my side markers (some sort of sale, Black Friday maybe?) and setting everything up took like 30 minutes. I used a walkthrough on this site, otherwise I could not have done it on my own without knowing which wires.
Yours looks really good! Personally, I had to spray a couple layers of plasti dip over my dome light cover because the LED was so bright. Really tones it down a lot but still lets off enough light to see. Pretty perfect. Also matches the color of the ceiling when the dome light is off so you can't even tell there is a dome light cover. Just looks black all the way across, even in the day. |
|
05-16-2013, 12:30 PM | #5 |
Team LFX
Drives: Fast Join Date: Mar 2012
Location: TX
Posts: 621
|
$200!!! I would have charged you less than $30 for the strips, and a pack of beer for the installation
|
05-17-2013, 03:07 PM | #6 | |
Drives: 2012 Ashen Grey LS-3 RS/2SS Coupe Join Date: Jan 2013
Location: Saratoga Springs, NY
Posts: 118
|
Quote:
Damn bro! Where were you? I would have bought you a case! the lights were only $40, but I paid $140 for the install. Pricey but I'm happy.
__________________
2012 AGM LS-3 RS/SS: Airaid CAI, Ceramic Coated Dynatech SuperMaxx LT Headers, High Flow Cats, Borla "S-Type" Cat-Back Exhaust, Ted Jannetty Tuned, LS-3 Cowl Badging, RS/SS Fender Badging. Custom Bow-Ties by Lupe
|
|
05-17-2013, 03:44 PM | #7 |
Texas HT5
Drives: IBM Join Date: Oct 2012
Location: Tx
Posts: 1,335
|
Dude I'm 20 new nothing about cars now I can install those in like 1 hour for free 140 is a rip off man.
|
05-17-2013, 07:56 PM | #8 |
Drives: 2013 2SS/RS/1LE Join Date: Apr 2010
Location: St Louis, MO
Posts: 3,087
|
Chill guys. Not everyone is mechanically inclined or has the ability/knowledge to do their own work.
It looks good. I've been looking at those myself. How closely does it match the factory blue? |
05-18-2013, 04:46 PM | #9 |
Switchin' n Twitchin'
Drives: 2011 Camaro Join Date: Nov 2010
Location: Chula Vista, CA (Eastlake)
Posts: 3,145
|
One of you guys wanna come up from Texas to do some lighting installs on my car, I've got beer...
__________________
I am not childish, you're just being a poopy head!
|
05-19-2013, 07:41 AM | #10 |
Team LFX
Drives: Fast Join Date: Mar 2012
Location: TX
Posts: 621
|
Haha
|
05-19-2013, 01:33 PM | #11 |
Drives: 2012 LS Join Date: Apr 2013
Location: South jersey
Posts: 205
|
Is there a way to tap off the factory ones? I work at Pepboys and he strips Are super cheap but I don't wanna run wires everywhere. Can I just tap into the factory wire behind the light?
|
05-19-2013, 02:58 PM | #12 |
|
Ill but beer I have this next up on my list and not too good with wiring either.
__________________
Cold Air Inductions CAI Stainless Power LT's with HFC's Flowmaster American Thunder Cat Back APEX Scoop and WW Relocation Kit VMAX Ported Throttle Body Custom Dyno Tune Pfadt 1.25" Lowering Springs ZL1 Rims on 275 front 315 Rear custome underlay vinyl wrap Anvil Spoiler heritage grill APR Front Splitter Custom Emblempros emblems ZL1 Side Skirts 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)
|
05-20-2013, 09:19 AM | #13 |
Drives: 2011 Camaro 2SS/RS (Black) L99 Join Date: Aug 2010
Location: Pilot Point, Texas
Posts: 2,185
|
here's mine
|
|
|
|
|