01-03-2012, 09:26 PM | #15 |
Drives: 2 LT/RS YELLOW, AUTO., VIN NO. 602 Join Date: May 2010
Location: LAVAL (10 min. north of Montreal), CANADA
Posts: 3,526
|
Here you are.
http://www.camaro5.com/forums/showthread.php?t=80180
__________________
T2 Facia, ACS TL1 Hood, ACS Winglets. G5CR CAI. Hotchsic Strut Brace and more...
|
01-06-2012, 12:27 PM | #16 | |
Drives: Black on Black 2SS, ground eff Join Date: Jul 2009
Location: L.A
Posts: 39
|
Quote:
|
|
01-06-2012, 06:34 PM | #17 |
Drives: 2011 Camaro LS Join Date: Sep 2008
Location: NJ
Posts: 1,917
|
From what I understand, the T2s come with a 2 part epoxy/glue that you need a special gun to use. Can ACS or you Richtie point me in the right direction to where I can purchase this gun at? I'm hoping to buy these ports next paycheck and will be doing the install myself.
|
01-07-2012, 12:13 PM | #18 |
Drives: 2010 Camaro Join Date: Dec 2009
Location: Montreal, Canada
Posts: 1,254
|
Bigwayne,
Simply place the order by PM and our site, and I can supply you a cartridge that won't require a special gun. It is a litle messier but will work, otherwise you need a 2 part 210 ml gun. I have seen them for 35$, I can also get you one if you don't find it. Acs |
01-07-2012, 01:35 PM | #19 |
Drives: 2012/2ss "transformers edition" Join Date: Oct 2011
Location: vacaville
Posts: 528
|
i had a hell of a time finding a gun that wasnt a special order item. drove around for 2 hours and the only place that had one wanted $99. i didnt have a choice so i bought it. turns out, it wouldnt accept the cartridge. i got creative and secured 2 paint stir sticks together and pushed out the adhesive on a mixing board. had plenty of time to do the install but it was a little messy. i'm not sure about the rest of the folks have done this install, but a dual cartridge dispenser in my area was impossible to find. it would have been nice to have something that was pre-mixed or didnt require "the quest for the holy grail". but otherwise, i'm very pleased with my t3 ports!
|
01-07-2012, 03:21 PM | #20 |
Drives: 2010 Camaro Join Date: Dec 2009
Location: Montreal, Canada
Posts: 1,254
|
In case you can't find it, here you go
Dispensing Gun http://www.acscomposite.com/store/#e...roduct=8595002 |
03-10-2012, 03:02 AM | #21 |
Car Lover By Nature
Drives: 2016 Hyper Blue Metallic SS Join Date: Dec 2009
Location: Central FL
Posts: 2,327
|
gonna do my T3 ports this weekend. (hopefully with good results.lol)
__________________
|
03-10-2012, 09:00 AM | #22 | |
Drives: 2010 Camaro Join Date: Dec 2009
Location: Montreal, Canada
Posts: 1,254
|
We have replaced our adhesive with a common size "caulking" gun adhesive...
So no more 310 ml gun search for the self installer :-) Quote:
|
|
|
|
Tags |
acs composite, t2 bumper, t2 ports, t3 ports, zl1 bumper |
|
|