07-27-2015, 07:49 PM | #1 |
OMWTFYB
Drives: ZL1 Join Date: Sep 2011
Location: Phoenix
Posts: 1,523
|
P3400
Driving my car home from work and noticed my engine light was on. Nothing felt different and didn't hear any noises. Pulled over and turned off and on to see if error message would come up and none didnt.
Drove home and went to Autozone and ran code and came up P3400 -The control module detects that the actual measured values from the MAF sensor, MAP sensor, and TP sensor, is not within the range of the calculated values for cylinder deactivation mode But my AFM is still working Where should I start troubleshooting??? |
07-28-2015, 09:13 AM | #2 |
OMWTFYB
Drives: ZL1 Join Date: Sep 2011
Location: Phoenix
Posts: 1,523
|
Bump anybody????
|
07-29-2015, 01:55 PM | #3 |
OMWTFYB
Drives: ZL1 Join Date: Sep 2011
Location: Phoenix
Posts: 1,523
|
Anyone?
|
07-29-2015, 02:09 PM | #4 |
Drives: 2011ss/rs camaro Join Date: Sep 2011
Location: florida
Posts: 1,261
|
Mods? Stock?
__________________
. OBX LTH,Rotofab,Magnuson Heartbeat.AEM wideband, HP Tuners
|
07-29-2015, 02:17 PM | #5 |
OMWTFYB
Drives: ZL1 Join Date: Sep 2011
Location: Phoenix
Posts: 1,523
|
no mufflers or resonator
|
07-31-2015, 09:06 AM | #6 |
Drives: 2011ss/rs camaro Join Date: Sep 2011
Location: florida
Posts: 1,261
|
That shouldn't effect anything but the sound. Might try disconnecting the battery and see if resetting the computer eliminates the cel in hopes it was a fluke. If it returns, worst case scenario is your back to square one.
__________________
. OBX LTH,Rotofab,Magnuson Heartbeat.AEM wideband, HP Tuners
|
|
|
|
|