10-18-2012, 02:31 AM | #1 |
Loving My LS3
|
Going through the carwash (GoPro)
just messing around with my GoPro. thought this would be a cool idea to dub in some Glitch Mob music to. Nothing to exciting but different
|
10-18-2012, 03:13 AM | #2 |
Drives: 2013 Ash Grey Camaro Join Date: Aug 2012
Location: FT Sill, Oklahoma
Posts: 144
|
No way in hell i would go thru a car wash, and let the water dry on my car... I prefer the bucket of water and lots of drying by hand.
|
10-18-2012, 03:17 AM | #3 |
Drives: 2013 Victorty Red Camaro 2SS Join Date: Jun 2012
Location: Altoona, PA
Posts: 404
|
|
10-18-2012, 03:22 AM | #4 |
Drives: 2013 Ash Grey Camaro Join Date: Aug 2012
Location: FT Sill, Oklahoma
Posts: 144
|
I just like to make sure i get everything off, and take my time making sure its done right. Car washes might not get everything, and then your drying a dirty car.
|
10-18-2012, 03:33 AM | #5 |
Drives: 2010 Camaro SS/RS Join Date: Aug 2011
Location: AZ
Posts: 190
|
The car washes out here use filtered water in the final rinse, and even when the rare drop doesn't get blown off, it doesn't leave a mark. Aren't all car washes like that??
__________________
19 GMC CC 4x4 2019 Harley RGS |
10-18-2012, 03:42 AM | #6 |
Loving My LS3
|
You assume too much....
|
10-18-2012, 03:50 AM | #7 |
Loving My LS3
|
yes the final rinse is a spot free rinse. I use the 2 bucket wash as well but and IMO this wash does just a good. There is no "right way" just your own way...
|
10-18-2012, 03:58 AM | #8 |
Drives: 2013 Ash Grey Camaro Join Date: Aug 2012
Location: FT Sill, Oklahoma
Posts: 144
|
Ive been stationed in alot of different states and havent come across a car wash that is filtered. The water is pretty hard, so it leaves alot of spots if you let it dry. I have filter on my hose at home that helps alot. I havent looked for a car wash since ive got this car.
|
10-18-2012, 04:22 AM | #9 | |
Loving My LS3
|
Quote:
|
|
10-18-2012, 05:55 AM | #10 |
COTW 5/06/2013
Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012
Location: Milford, Michigan
Posts: 3,201
|
Neat video, I will not use carwashes on mine due to the stripes. It can and will lift stripes at times. I have seen it too many times. The water pressure lifts the stripes and the air makes it worse. Once it starts, you cannot just drive out, you have to watch your stripes get ruined. No stripes ok on a touchfree, stripes get handwashed only.
__________________
2017 Grand Sport, Borla X Pipe.....Enough Said
|
10-18-2012, 07:38 AM | #11 |
Loving My LS3
|
...
|
10-18-2012, 07:39 AM | #12 |
Retarded One-Legged Owl
Drives: 2010 Black Camaro 2SS Join Date: Oct 2008
Location: San Antonio, TX
Posts: 9,745
|
I hope you had the camera in the waterproof case
__________________
|
10-18-2012, 07:45 AM | #13 |
Loving My LS3
|
Lol case worked flawless. However this was not the first water test I gave it. Was a little concerned the water pressure may force water in the case but it held up fine.
|
10-18-2012, 07:59 AM | #14 |
Procharged
|
I concur.....who cares if someone wants to use a car wash.....I mostly use a hose and bucket as well, but have ran it through the car wash here and there. It's common knowledge that you will still have quite a bit of water left over. Therefore, you bring towels to get the rest....
Keep doing what you do Ryan.
__________________
2010 ABM RS/SS with a Procharged LS3, Flowmaster exhaust. |
|
|
|
|