08-20-2020, 10:52 PM | #1 |
Drives: 2013 HWSE Indy Festial #26 Join Date: Mar 2011
Location: Fredericksburg, VA
Posts: 2,670
|
Girodisc?
Any road course warriors using Girodisc rotors? I plan to track this ZL1 a bunch and I do not want to use OEM like I have on other ZL1's I've owned.
Time for an upgrade and I'm wondering if anyone else has used these? ***I'm going to sell my OEM set to partially fund this upgrade. Fronts have less than 500 street miles (like new) and rears are still in the boxes.
__________________
There are only so many days in your lifetime. So get out and drive your Camaro...
Dan Last edited by Z/28Dan; 08-21-2020 at 09:31 PM. |
08-21-2020, 07:37 AM | #2 |
Drives: 2013 ZL1 Join Date: Dec 2019
Location: Vancouver WA
Posts: 21
|
Stoptech makes a quality 2 piece rotor for the ZL1. The ring is replaceable. I think they cost around $400 each.
|
09-03-2020, 07:34 PM | #3 |
Chevy Enthusiast.
Drives: 2015 Camaro ZL1 Summit White Join Date: Jan 2019
Location: Calgary Area, Alberta
Posts: 221
|
Have a part number(s)?
__________________
Levon H. Bone Stock |
09-07-2020, 08:07 AM | #4 |
Drives: 2013 ZL1 Join Date: Dec 2019
Location: Vancouver WA
Posts: 21
|
I will look up the part numbers and post later today.
|
09-07-2020, 10:11 AM | #5 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,063
|
Check KNS brake Ken has good prices on both Girodisc and DBA and the DBA’s you can use your stock hats and hardware. So don’t sell them off yet.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. Last edited by olblue75; 09-07-2020 at 01:03 PM. |
09-07-2020, 09:32 PM | #6 |
Drives: 2013 HWSE Indy Festial #26 Join Date: Mar 2011
Location: Fredericksburg, VA
Posts: 2,670
|
Thanks for the referral to kns. I already bought the Gyrodisc rotors from dyno Steve and they are being shipped. Got a nice camaro5 discount too. Now I’m shoppping pads. I’ll post up a pic when I install them.
__________________
There are only so many days in your lifetime. So get out and drive your Camaro...
Dan |
|
|
|
|