11-30-2018, 07:52 AM | #1 |
Drives: 14' Red Z/28 #336 Join Date: Mar 2016
Location: Northen Indiana
Posts: 367
|
FS TechAFX fuel rail flip hose
TechAFX fuel rail hose I used to flip the fuel rail on a LS7
installed and ran only minutes then decided to go AN hose and fittings $50 shipped to lower 48 |
06-20-2019, 06:58 AM | #2 |
Drives: 14' Red Z/28 #336 Join Date: Mar 2016
Location: Northen Indiana
Posts: 367
|
bump
|
06-20-2019, 10:57 AM | #3 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,063
|
Will this work on a LS3?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
06-21-2019, 07:09 AM | #4 |
Drives: 14' Red Z/28 #336 Join Date: Mar 2016
Location: Northen Indiana
Posts: 367
|
|
06-03-2020, 03:21 PM | #5 |
Drives: 14' Red Z/28 #336 Join Date: Mar 2016
Location: Northen Indiana
Posts: 367
|
bump
|
12-12-2020, 09:59 AM | #6 |
Did you flip this fuel rail with the factory intake manifold? I’m thinking of doing the same but I’m concerned the crossover won’t fit.
|
|
12-12-2020, 08:35 PM | #7 |
Drives: 2010 Camaro 2SSRS M6 Join Date: Jan 2019
Location: Alabama
Posts: 1,249
|
Yes, this will work with the factory intake
__________________
ECS supercharger, custom ground cam, ported throttle body, long tube headers, aeromotive fuel pump, fic injectors, ATI super damper, Corsa Extreme exhaust, elite engineering catch can and many other things.
|
12-18-2020, 11:29 AM | #8 |
Drives: 2010 Chervrolet Camaro 2SS M6 Join Date: Apr 2020
Location: Macomb ,Mi
Posts: 9
|
Tech AFX
Is the Tech AFX flip hose still available ?
|
12-19-2020, 07:55 AM | #9 |
Drives: 14' Red Z/28 #336 Join Date: Mar 2016
Location: Northen Indiana
Posts: 367
|
|
|
|
|
|