Atlanta Club Lounge - Page 1176 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

IH8OPEC · 03-09-2014, 09:40 PM

Quote:

Originally Posted by ben3350

Has anyone put an aftermarket radio in their Camaro? I just put this in, still seeing how I like it.

I've thought about going to a setup like this but it looks like it blocks most of the oil pressure and volt gauges.

CamaroKid300 · 03-09-2014, 10:10 PM

Quote:

Originally Posted by IH8OPEC

I've thought about going to a setup like this but it looks like it blocks most of the oil pressure and volt gauges.

Yep that's the one issue that the scoshe kit has that the metro doesn't.

dianeokie · 03-09-2014, 11:43 PM

Quote:

Originally Posted by Cam1LE

I have a really bad paint chipping issue in front of my rear wheels. It's so bad, I'm now going to have to look into getting it repaired/painted. Anyone else have this problem? Any suggestions on shops in the Alpharetta area that I can have look at it?

Thanks,

Quote:

Originally Posted by csjcsj

Join the crowd!!!!

You all talking about the "gills" area between the door and the back wheel well? I had mine protected with the Xpel Xtreme paint protection. No problems there.

ben3350 · 03-10-2014, 02:48 AM

Quote:

Originally Posted by IH8OPEC

I've thought about going to a setup like this but it looks like it blocks most of the oil pressure and volt gauges.

It's actually not as bad as it looks when you are sitting in the car. But it's also not really an issue for me since I rarely look at the gauges normally. I only check them every once in a while. But for someone who uses them a lot, I could definitely see it being a reason not to get it.

It was pretty hard to find the Alpine version of the scosche kit. In my opinion it looks better than the normal scosche kit. Both are good, but I like how the Alpine kit curves with the head unit and the silver matches the rest of the dash.

IH8OPEC · 03-10-2014, 08:11 AM

I look at the oil pressure gauge quite often but that's something I've done since I started driving my Dad would always tell me to pay attention to the gauges and I can still hear him in my head.

Here's the unit I had in my 09 smart car it would solve the small clock problem you have with your current unit. Unfortunately it's no longer available.

http://www.pioneerelectronics.com/PU...s/AVH-P6000DVD

DJ-Silver 2SS · 03-10-2014, 01:56 PM

Is anyone wanting to take a trip down to Augusta this weekend for an all Camaro show? If you think you might, let me know.

Sent from my iPhone using Tapatalk

SeaCompiler · 03-10-2014, 02:07 PM

Well, I dropped off the Camaro and left it at Spartan Performance for Josh to work his magic

. Getting cammed and udp installed this week. Afterwards, gonna fix some cosmetic things I didn't do to great with.

Can't wait to hear the lope and feel the power.

Southern Comfort · 03-10-2014, 02:29 PM

Quote:

Originally Posted by DJ-Silver 2SS

Is anyone wanting to take a trip down to Augusta this weekend for an all Camaro show? If you think you might, let me know.

I have NASA track time (drivers ed) this w/e

Quote:

Originally Posted by SeaCompiler

Well, I dropped off the Camaro and left it at Spartan Performance for Josh to work his magic

. Getting cammed and udp installed this week. Afterwards, gonna fix some cosmetic things I didn't do to great with.

Can't wait to hear the lope and feel the power.

Sweet!

Cam1LE · 03-10-2014, 02:44 PM

Quote:

Originally Posted by dianeokie

You all talking about the "gills" area between the door and the back wheel well? I had mine protected with the Xpel Xtreme paint protection. No problems there.

Yes, the gill area. I am going to do the protective film. I just need to figure out what to do about the paint first. Looks like someone hit it with a sand blaster....

SlowSS · 03-10-2014, 03:06 PM

Quote:

Originally Posted by Cam1LE

Yes, the gill area. I am going to do the protective film. I just need to figure out what to do about the paint first. Looks like someone hit it with a sand blaster....

I'm in the same boat! I know quite a few retailers that have used the Langka paint chip system and works great. I personally haven't tried it, but thinking I may just have to. Looks like crap the way it is!

How many miles do you have on yours?

CamaroKid300 · 03-10-2014, 05:01 PM

SOS SOS SOS

I AM CURRENTLY ON THE SIDE OF TBE
ROAD ON 285 under the runway with a blown tire. Does anyone have a spare they can bring me. I will pay for gas whatever.

CamaroKid300 · 03-10-2014, 05:02 PM

Please call me at 404-357-0047

CamaroKid300 · 03-10-2014, 05:54 PM

Getting a tow truck.

OK2DRUL · 03-10-2014, 06:05 PM

Quote:

Originally Posted by CamaroKid300

SOS SOS SOS

I AM CURRENTLY ON THE SIDE OF TBE
ROAD ON 285 under the runway with a blown tire. Does anyone have a spare they can bring me. I will pay for gas whatever.

Quote:

Originally Posted by CamaroKid300

Please call me at 404-357-0047

Quote:

Originally Posted by CamaroKid300

Getting a tow truck.

Just saw all these hope all is ok. Did you try Chevy roadside assistance?

03-10-2014, 08:11 AM	#16455
IH8OPEC ΜΟΛΩΝ ΛΑΒΕ Drives: 2010 VR/W 2SS/RS L99 Join Date: Dec 2012 Location: Ellijay, GA Posts: 509	I look at the oil pressure gauge quite often but that's something I've done since I started driving my Dad would always tell me to pay attention to the gauges and I can still hear him in my head. Here's the unit I had in my 09 smart car it would solve the small clock problem you have with your current unit. Unfortunately it's no longer available. http://www.pioneerelectronics.com/PU...s/AVH-P6000DVD __________________

03-10-2014, 01:56 PM	#16456
DJ-Silver 2SS Ah DJ-IOM ZL1 haha Drives: 13 IOM ZL1 M6 & 10 SIM 2SS M6 Join Date: Jul 2009 Location: Hope Mills, NC Posts: 580 View My Garage	Is anyone wanting to take a trip down to Augusta this weekend for an all Camaro show? If you think you might, let me know. Sent from my iPhone using Tapatalk __________________ 2013 IOM ZL1 #002415 Born 09/13/12 2010 SIM 2SS/RS #005549 Born 05/02/09

03-10-2014, 02:07 PM	#16457
SeaCompiler ...not a marine biologist Drives: 2012 Camaro RY SS LS3 Join Date: Mar 2013 Location: Clarkesville, GA Posts: 752 View My Garage	Well, I dropped off the Camaro and left it at Spartan Performance for Josh to work his magic. Getting cammed and udp installed this week. Afterwards, gonna fix some cosmetic things I didn't do to great with. Can't wait to hear the lope and feel the power. __________________ Forged 416 stroker Turbocharged with Huron Speed with Cam Motion custom grind,Tuned by Vengeance, 8psi, 25% PowerBond UDP, Ported TB, shaved heads, LS9 gaskets, chromoly pushrods, BT trunnions & dual valve springs, IWIS, Might Mouse CC, SJM Line Lock,, MSD 2-Step, ZL1 Rear End, ZL1 spoiler, Strut Brace, ARP bolts, Skip shift elim, A-Pillar Gauges, FR Style 41 20X10, 3 inch exhaust, blackouts, Lowered, Custom badges, Hines vents,RPI fender vents, Technostalgia Tail Lights, Metra Kit, Pioneer stereo, Morimoto RGB Halos, "The Great Awakening" on gab.com

03-10-2014, 05:01 PM	#16461
CamaroKid300 ace5.org Drives: 2017 ZL1 M6 Join Date: Apr 2010 Location: Atlanta, GA Posts: 6,142 View My Garage	SOS SOS SOS I AM CURRENTLY ON THE SIDE OF TBE ROAD ON 285 under the runway with a blown tire. Does anyone have a spare they can bring me. I will pay for gas whatever. __________________ Stock...For Now.

03-10-2014, 05:02 PM	#16462
CamaroKid300 ace5.org Drives: 2017 ZL1 M6 Join Date: Apr 2010 Location: Atlanta, GA Posts: 6,142 View My Garage	Please call me at 404-357-0047 __________________ Stock...For Now.

03-10-2014, 05:54 PM	#16463
CamaroKid300 ace5.org Drives: 2017 ZL1 M6 Join Date: Apr 2010 Location: Atlanta, GA Posts: 6,142 View My Garage	Getting a tow truck. __________________ Stock...For Now.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does Anyone Use a Club?	PercyJWellingtonIII	5th Gen Camaro SS LS LT General Discussions	51	12-31-2011 08:05 AM
CAJUN CAMARO CLUB/ Meeting to formalize our club	GATORJAK	USA - Southcentral	124	03-20-2011 08:22 PM
In the process of starting a new Camaro Club this year!	Blue Maro Demon	USA - Southeast	0	01-23-2011 11:51 PM
Eastern TN 5th GEN Camaro Club	304hp?	USA - Southeast	0	02-04-2010 03:11 AM
Club Day at Speedworld in January on a Sunday	chellzers	USA - Southwest	0	01-03-2010 04:39 PM