Atlanta Club Lounge - Page 1190 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

GtSmoke · 03-24-2014, 09:11 AM

Would anybody going to the Fest want to split a room?

CamaroKid300 · 03-24-2014, 12:11 PM

Yeah I'm going to try to make the fest if I can save up money for a flight out there and get a ride back through with someone. I have a final exam at noon the friday of the fest so I could only spend friday night and saturday night there.

Realistically probably not going to happen cause if I spend the money on a flight I want to stay wed-sun but oh well.

I wish it was just one week later....

OK2DRUL · 03-24-2014, 12:17 PM

Right now I'm not going to be able to make it. I've got a work deadline the following week and I'm pretty sure I will be stuck in the office that weekend instead of enjoying a road trip in my car.

SlowSS · 03-24-2014, 12:39 PM

Quote:

Originally Posted by OK2DRUL

Got the Pfadt drop springs, toe rods, and trailing arms installed today with a little help from Jeff and a lot of help from his friend Josh. Looking forward to the sway bars, sub frame, and differential bushings next month!

Hey man just wondering what you meant by "a little help from Jeff"?

CamaroKid300 · 03-24-2014, 12:43 PM

I'm glad we are off page 666 cause I have a finance test at 6 and that was going to be some bad mojo.

OK2DRUL · 03-24-2014, 12:43 PM

Quote:

Originally Posted by SlowSS

Hey man just wondering what you meant by "a little help from Jeff"?

Haha just poking some fun.

I appreciate everything yesterday. The car feels completely different now. Looking forward to getting the rest of my parts ordered and put on next month, then some track days this summer hopefully.

SlowSS · 03-24-2014, 01:06 PM

Quote:

Originally Posted by OK2DRUL

Haha just poking some fun.

I appreciate everything yesterday. The car feels completely different now. Looking forward to getting the rest of my parts ordered and put on next month, then some track days this summer hopefully.

Well damn, an emoticon after that would have worked

I was sitting here going, well I know that they did the work on the trailing arms and tie rods, but I didn't know how to do all of that and would have just been in the way lol

Glad it worked out and we got everything done. Josh doesn't think he will be able to get his torque wrench replaced under warranty.

Car looked great!

OK2DRUL · 03-24-2014, 01:14 PM

Quote:

Originally Posted by SlowSS

Well damn, an emoticon after that would have worked

I was sitting here going, well I know that they did the work on the trailing arms and tie rods, but I didn't know how to do all of that and would have just been in the way lol

Glad it worked out and we got everything done. Josh doesn't think he will be able to get his torque wrench replaced under warranty.

Car looked great!

Give him my cell and tell him to let me know how it works out with Snap-On. If they won't replace it I will.

Southern Comfort · 03-24-2014, 01:18 PM

Quote:

Originally Posted by OK2DRUL

Got the Pfadt drop springs, toe rods, and trailing arms installed today with a little help from Jeff and a lot of help from his friend Josh. Looking forward to the sway bars, sub frame, and differential bushings next month!

Quote:

Originally Posted by SlowSS

Hey man just wondering what you meant by "a little help from Jeff"?

Really Jason???
After Jeff did the fronts twice in less time than the two rears with even more people watching?

Like his ET, slow but methodical and complete with extra nuts to boot!

SlowSS · 03-24-2014, 01:35 PM

Quote:

Originally Posted by Southern Comfort

Really Jason???
After Jeff did the fronts twice in less time than the two rears with even more people watching?

Like his ET, slow but methodical and complete with extra nuts to boot!

mrpyle · 03-24-2014, 05:46 PM

OFF topic ... but most of you are fairly local. I need a licensed HVAC tech (or someone who knows what they are doing) to check out my mothers outdoor unit. I know enough about them to be dangerous. And I would rather check here first to see if anyone can recommend someone ... someone that won't dishonestly break the bank, if you know what I mean.

blake2010ss · 03-24-2014, 06:42 PM

I can ask my friend if he wants to do a side job. Depends how much work wears him out during the week. He knows HVAC really well.

AG1LE · 03-24-2014, 06:59 PM

Quote:

Originally Posted by mrpyle

Sprayed while on the car? Would it be easier to mask it off and spray it, or just spray it and then trim/peel around it? I was also thinking I might use the plasti-dip on the rear panel between the tail lights. My in-law suggested maybe blackout the side mirror housings, but idk about that.

Sprayed mine on the car, and the excess around the letters peeled off nicely

mrpyle · 03-24-2014, 07:06 PM

Quote:

Originally Posted by JMWNERW

Sprayed mine on the car, and the excess around the letters peeled off nicely

Gonna give it a whirl this weekend lol.

03-24-2014, 12:11 PM	#16648
CamaroKid300 ace5.org Drives: 2017 ZL1 M6 Join Date: Apr 2010 Location: Atlanta, GA Posts: 6,142 View My Garage	Yeah I'm going to try to make the fest if I can save up money for a flight out there and get a ride back through with someone. I have a final exam at noon the friday of the fest so I could only spend friday night and saturday night there. Realistically probably not going to happen cause if I spend the money on a flight I want to stay wed-sun but oh well. I wish it was just one week later.... __________________ Stock...For Now.

03-24-2014, 12:17 PM	#16649
OK2DRUL ace5.org (Atlanta Club) Drives: 2010 Black/IOM 2SS LS3 Join Date: Sep 2013 Location: St. Simons Island, GA Posts: 1,011	Right now I'm not going to be able to make it. I've got a work deadline the following week and I'm pretty sure I will be stuck in the office that weekend instead of enjoying a road trip in my car. __________________

03-24-2014, 12:43 PM	#16651
CamaroKid300 ace5.org Drives: 2017 ZL1 M6 Join Date: Apr 2010 Location: Atlanta, GA Posts: 6,142 View My Garage	I'm glad we are off page 666 cause I have a finance test at 6 and that was going to be some bad mojo. __________________ Stock...For Now.

03-24-2014, 05:46 PM	#16657
mrpyle Drives: 2011 2LT/RS - Synergy Green Join Date: Mar 2013 Location: Auburn, Ga Posts: 432	OFF topic ... but most of you are fairly local. I need a licensed HVAC tech (or someone who knows what they are doing) to check out my mothers outdoor unit. I know enough about them to be dangerous. And I would rather check here first to see if anyone can recommend someone ... someone that won't dishonestly break the bank, if you know what I mean. __________________

03-24-2014, 06:42 PM	#16658
blake2010ss Drives: 2010 Camaro 2ss/rs Join Date: Oct 2009 Location: stone mountain, GA Posts: 2,228	I can ask my friend if he wants to do a side job. Depends how much work wears him out during the week. He knows HVAC really well. __________________ 2010 Camaro 2SS/RS LS3 1093/1066 416, AGP 6262, E85, Cam

03-24-2014, 09:11 AM	#16647
GtSmoke Drives: 2011 RJT 2SS/RS M6 Join Date: Jul 2010 Location: Cumming, GA Posts: 164 View My Garage	Would anybody going to the Fest want to split a room?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does Anyone Use a Club?	PercyJWellingtonIII	5th Gen Camaro SS LS LT General Discussions	51	12-31-2011 08:05 AM
CAJUN CAMARO CLUB/ Meeting to formalize our club	GATORJAK	USA - Southcentral	124	03-20-2011 08:22 PM
In the process of starting a new Camaro Club this year!	Blue Maro Demon	USA - Southeast	0	01-23-2011 11:51 PM
Eastern TN 5th GEN Camaro Club	304hp?	USA - Southeast	0	02-04-2010 03:11 AM
Club Day at Speedworld in January on a Sunday	chellzers	USA - Southwest	0	01-03-2010 04:39 PM