04-27-2015, 10:35 PM | #1 |
Drives: Currently 2016-2SS, Future ZL1/Z28 Join Date: Jul 2010
Location: Kansas
Posts: 978
|
Trying to install a color DIC in a 2010
I don't know if this is easy or not but i think it is worth a try
this will require time, patience, programing, calibrating, and if I break my car I don't want to know. I hope this doesn't become a dead thread, I'm gonna try it with both DIC "180/200MPH" I hope to have some good results soon or at least some progress. don't buy parts till its working, unless you want a paperweight WARNING: trying this could set up some DTC codes and you might need a dealer grade diagnostic scan tool to remove it!!!!
__________________
|
04-28-2015, 12:30 AM | #2 |
Drives: 2011 Synergy Green 2SS Camaro Join Date: Jan 2012
Location: Amarillo
Posts: 21
|
I'm definitely interested!
|
04-28-2015, 09:18 AM | #3 |
Drives: Currently 2016-2SS, Future ZL1/Z28 Join Date: Jul 2010
Location: Kansas
Posts: 978
|
no more odometer dashes marks, first problem solved
__________________
|
04-29-2015, 11:00 PM | #4 |
Drives: 2011 Synergy Green 2SS Camaro Join Date: Jan 2012
Location: Amarillo
Posts: 21
|
You got it installed? Was it direct plug and play? Everything works? And about how much does a color dic gauge pack run?
|
04-30-2015, 12:16 AM | #5 |
Baphomet's Wheelman
Drives: Everyone crazy..... Join Date: May 2009
Location: Atlanta
Posts: 63
|
I'm all over this.
Awaiting your updates.... |
04-30-2015, 08:42 AM | #6 |
Todd
|
interested
|
04-30-2015, 08:54 AM | #7 |
Drives: Currently 2016-2SS, Future ZL1/Z28 Join Date: Jul 2010
Location: Kansas
Posts: 978
|
Yes I have installed it, not everything works, I was out of town and take the opportunity to do some tests and take note and have a good starting point, I'll post a video of what works and what does not
__________________
|
04-30-2015, 10:32 PM | #8 |
Drives: Currently 2016-2SS, Future ZL1/Z28 Join Date: Jul 2010
Location: Kansas
Posts: 978
|
First test
2nd test
__________________
Last edited by DWALEX; 04-30-2015 at 10:56 PM. |
04-30-2015, 10:36 PM | #9 |
Aim Small...Miss Small
Drives: 2018 ZL1 M6 Join Date: Jun 2012
Location: San Jose, CA
Posts: 866
|
So it worked!
__________________
2010 Camaro 2SS/RS
|
04-30-2015, 10:43 PM | #10 |
Drives: 2016 camaro 1SS Join Date: Jun 2013
Location: Miami
Posts: 350
|
Straight plug and play?
__________________
.
2016 BLK Camaro 1SS/LT1 M6: NPP | black front/rear bowtie | Blacked out taillights 2011 IOM Camaro 1SS/RS LS3: Stainless works 1 7/8" LT headers w/ Offroad pipes | TSP Cam 235/239 on a 112 | Powerbound 25% UD Pulley Roto-Fab Cold Air Intake | SW Retro Chambered Catback Exhaust | VMax Ported TB | Hurst Short Throw Shifter Trunnion upgrade | LSA Oil Pump | BMR 1.25 Spings | R1 Concept d/s Rotors Tuned by Lashway Motorsports - 501 Hp 430 ft-lb |
04-30-2015, 10:59 PM | #11 |
Drives: Currently 2016-2SS, Future ZL1/Z28 Join Date: Jul 2010
Location: Kansas
Posts: 978
|
85%, still got work to do
Yes
__________________
|
05-01-2015, 12:43 AM | #12 |
Drives: 2LS 2014 Join Date: Oct 2013
Location: Staten ISland
Posts: 3,404
|
I wonder if it would work better on a 2014? I see the RPM is not working.
__________________
|
05-01-2015, 12:48 AM | #13 |
Drives: 2LS 2014 Join Date: Oct 2013
Location: Staten ISland
Posts: 3,404
|
I want one!
__________________
|
05-01-2015, 07:51 AM | #14 | |
Drives: Currently 2016-2SS, Future ZL1/Z28 Join Date: Jul 2010
Location: Kansas
Posts: 978
|
Quote:
I need work on this: Airbag module Steering wheel module Engine speed Shift indicator Fuel estimate Oil life remaining everythink also works
__________________
|
|
|
|
|
|