10-15 ZL1 Add-On Lift Pads - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SummitWhite11 · 02-27-2021, 07:10 PM

Quote:

Originally Posted by 1JEWLDSSRS

Good luck, they are really nice looking, and beefy!!!

Will place my order tmw. Just got done replacing the water pump yesterday on the Camaro. That was messy but fun! Will look forward to these lift pads!

1JEWLDSSRS · 02-27-2021, 07:39 PM

Nice job! Yea you will like them. Takes all of about 10 minutes to install them.

SummitWhite11 · 02-27-2021, 09:29 PM

Quote:

Originally Posted by 1JEWLDSSRS

Nice job! Yea you will like them. Takes all of about 10 minutes to install them.

The red is currently out of stock! Argh!

1JEWLDSSRS · 02-28-2021, 06:36 AM

OH BOY!!! Hang in there, they will be back in stock I'm sure.

SummitWhite11 · 02-28-2021, 09:01 AM

Quote:

Originally Posted by 1JEWLDSSRS

OH BOY!!! Hang in there, they will be back in stock I'm sure.

I emailed two different sources requesting info on when they will be available again.

Panda1LE · 02-28-2021, 12:59 PM

i have had the red bolt ons for a while now, very convenient and never an issue

ariZona28 · 02-28-2021, 01:36 PM

I vote for the magnetic removable for a few reasons. I have 2 Camaros, only needed to buy one set (could actually get away with purchasing one single unit). I have the factory jack/spare in my 2LS and the jack uses the pinch weld as a lifting point. I have a Modern Spare assembly in the Z/28 and its jack uses the pinch weld also. Haven't tried one of the MagPads on any other vehicles but I suspect you could use them on pinch welds with similar dimensions. Either way you won't be disappointed, good quality stuff!

Shodown · 02-28-2021, 02:19 PM

I got mine on Amazon so check there too.

They are the best “pre mod” mod I did. Makes it super easy to lift the car.

SummitWhite11 · 02-28-2021, 06:16 PM

Quote:

Originally Posted by Panda1LE

i have had the red bolt ons for a while now, very convenient and never an issue

Glad to hear! Hope to join you and those soon who have em!

Sent from my iPhone using Tapatalk

SummitWhite11 · 02-28-2021, 06:17 PM

Quote:

Originally Posted by Shodown

I got mine on Amazon so check there too.

They are the best “pre mod” mod I did. Makes it super easy to lift the car.

I have checked before and again just now. No red.

Sent from my iPhone using Tapatalk

1JEWLDSSRS · 03-01-2021, 12:36 PM

Wow, red seems to be pretty popular with both. Keep checking on them so you can get a set as soon as you can. When I purchased my Corsa Sport catback, I got an email saying they were back in stock at Phastek, I ordered it right away, and after 2 days when I let the guys on here know about it, they were sold out AGAIN!!! So my point to you is keep checking as they could show up at anytime, and be gone again just that quickly. Good luck.

SummitWhite11 · 03-02-2021, 05:46 PM

Quote:

Originally Posted by 1JEWLDSSRS

Wow, red seems to be pretty popular with both. Keep checking on them so you can get a set as soon as you can. When I purchased my Corsa Sport catback, I got an email saying they were back in stock at Phastek, I ordered it right away, and after 2 days when I let the guys on here know about it, they were sold out AGAIN!!! So my point to you is keep checking as they could show up at anytime, and be gone again just that quickly. Good luck.

It seems that way! I have been keeping an eye out and at the same time I set up an email alert for when the product becomes available again, they will notify me. Hopefully they do otherwise i’ll have to call in and see what they say.

Sent from my iPhone using Tapatalk

1JEWLDSSRS · 03-02-2021, 06:34 PM

Quote:

Originally Posted by SummitWhite11

It seems that way! I have been keeping an eye out and at the same time I set up an email alert for when the product becomes available again, they will notify me. Hopefully they do otherwise i’ll have to call in and see what they say.

Sent from my iPhone using Tapatalk

If you did the email alert with Phastek, you will be golden!! I think it actually reserves one for you, it did for my Corsa..GL..

SummitWhite11 · 05-04-2021, 11:53 AM

Quote:

Originally Posted by 1JEWLDSSRS

If you did the email alert with Phastek, you will be golden!! I think it actually reserves one for you, it did for my Corsa..GL..

I did not get a chance to post lately but I finally got em after I received an email notification from ZL1 AddOn's website. Phastek still did not have them in stock .They came in about 2-3 weeks ago and took very little time to install

02-27-2021, 07:39 PM	#16
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 11,435	Nice job! Yea you will like them. Takes all of about 10 minutes to install them. __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

02-28-2021, 06:36 AM	#18
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 11,435	OH BOY!!! Hang in there, they will be back in stock I'm sure. __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

02-28-2021, 12:59 PM	#20
Panda1LE Drives: 2013 2SS/RS 1LE (6spd) Join Date: Mar 2018 Location: Temecula, CA Posts: 281	i have had the red bolt ons for a while now, very convenient and never an issue __________________ CAI intake, Stainless Power LTH, SCT X4, NPP exhaust

02-28-2021, 01:36 PM	#21
ariZona28 Give speed a chance Drives: 2015 Camaro 2LS, 2015 Camaro Z/28 Join Date: Nov 2019 Location: Mesa, Az Posts: 2,226	I vote for the magnetic removable for a few reasons. I have 2 Camaros, only needed to buy one set (could actually get away with purchasing one single unit). I have the factory jack/spare in my 2LS and the jack uses the pinch weld as a lifting point. I have a Modern Spare assembly in the Z/28 and its jack uses the pinch weld also. Haven't tried one of the MagPads on any other vehicles but I suspect you could use them on pinch welds with similar dimensions. Either way you won't be disappointed, good quality stuff! Attached Images __________________ 2LS: a TREMENDOUS machine. Z/28: it's a BIT MORE POWERFUL, of course.

02-28-2021, 02:19 PM	#22
Shodown Drives: 2014 ZL1 Join Date: Jun 2009 Location: Tucson, AZ Posts: 314	I got mine on Amazon so check there too. They are the best “pre mod” mod I did. Makes it super easy to lift the car. __________________ 2014 ZL1 M6: Roto Fab Intake, LS3 TB, Long Tube Headers, NPP, Mild 2 Wild, JMS BAP, SMG aux pump, ID 1050X Injectors, DSX Flex Fuel Sensor, 10.5" DSX Lower Pulley, Killer Chiller, Tuned by Ted at JRE, Pedders XA Extreme coilovers, Mickey Thompson Street S/S on Weld S71s

03-01-2021, 12:36 PM	#25
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 11,435	Wow, red seems to be pretty popular with both. Keep checking on them so you can get a set as soon as you can. When I purchased my Corsa Sport catback, I got an email saying they were back in stock at Phastek, I ordered it right away, and after 2 days when I let the guys on here know about it, they were sold out AGAIN!!! So my point to you is keep checking as they could show up at anytime, and be gone again just that quickly. Good luck. __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.