10-15-2018, 07:26 PM | #1 |
Banned
Drives: 2015 Camaro Join Date: Aug 2018
Location: My Garage
Posts: 1,125
|
OEM foglight switch to work with foglights from Gen5DIY?
I found an OEM foglight switch at the local junkyard. If I already have the foglights and the wiring harness from Gen5DIY, can I make the stock switch work with my foglights?
Right now, I have the foglights wired to work when I turn the parking lights on. I'm assuming that I would need to go to the dealer and have them program the BCM for the foglight option. However, what do I do about the missing wiring pin in the fuse box? Thanks. |
10-21-2018, 01:42 AM | #2 |
Drives: 2019 Chevy Camaro 2SS 1LE Join Date: Jun 2017
Location: shepherdsville Ky
Posts: 19
|
I have wondered the same thing. How could I make the IEM switch work on my 2014 LS ?
|
10-21-2018, 02:31 AM | #3 |
Drives: 2019 Chevy Camaro 2SS 1LE Join Date: Jun 2017
Location: shepherdsville Ky
Posts: 19
|
when you installed the fog lights did you notice they were slightly loose although they clicked in place?
__________________
|
|
|
|
|