F/S: Racing parts (lots of goodies for the track) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ddavis · 11-02-2011, 11:04 AM

I thought I would post this up local first. I decided not to race my SS at the track due to alot of things happening recently, so Im letting these go to someone who can put these to better use.

*2 Nitto NT05r drag radials, 305/45/18 - brand new $450

*2 Forgestar f14's matte black wheels, 18x10 - brand new $500

*Gforce Engineering 300m Race Axles - The original owner had less then 200 miles on them when I got them. I sent them off had them inspected and rebuilt by Gforce to check things over, never put them on since then. $1000 PENDING SALE..

*SJM Linelock - brand new $100 SOLD

*AR10 II SA2010 black Auto Racing Helmet by HJC size Large- brand new $225

Im located in Half Moon Bay, CA

The Stig · 11-02-2011, 11:16 AM

willing to ship the helmet and line lock?

PM sent

ddavis · 11-02-2011, 11:26 AM

pm sent

The Stig · 11-02-2011, 11:28 AM

pm replied.

The Shadoww · 11-02-2011, 01:01 PM

What is a line lock used for? i thought it was like a praking break. My buddy has a line lock on his rock crawler and he said it stops your break fluid in the line to keep the wheels from moving (or something like that). Is that what it does on the Camaro too?

ddavis · 11-02-2011, 01:12 PM

Yeh, its so you can do a burnout in the box before pulling up to the line easier at the strip. It locks the front brakes by stopping the brake fluid from flowing but leaves your rear tires to spin free so you can put down a nice burnout to warm the tires up.

The Shadoww · 11-02-2011, 01:39 PM

Ahhhhh. I seeeee. Thank you!

ddavis · 11-02-2011, 02:09 PM

Linelock is sold!

Inferno LSX · 11-04-2011, 12:12 PM

Are the DRs mounted in your F14s?

ddavis · 11-04-2011, 12:15 PM

not mounted, the tires still have the sticker on them and the wheels is still in their shipped boxes. I never mounted them.

Inferno LSX · 11-04-2011, 04:20 PM

One more question, what's the width of the rims? 18x?

ddavis · 11-04-2011, 04:28 PM

18x10 so I could run the 305/45/18's Nitto05r's on them. I went with them for a few reasons. Lighter wheel/tire, cheaper tires then 315's (for when I burn through them), and still plenty wide enough to hook up well at the track with alot of power from what i've seen.

Inferno LSX · 11-04-2011, 06:28 PM

Yah I run the exact same tires, but they don't start to really hook till my 3 pass of the day on them. Let me see how finances go next week. It's getting close to the holidays.

ddavis · 11-04-2011, 06:41 PM

are you using a linelock to warm them up?

11-02-2011, 11:04 AM	#1
ddavis boostalicious Drives: Blown Ls3 Join Date: May 2010 Location: Bay Area SF Posts: 1,030 View My Garage	F/S: Racing parts (lots of goodies for the track) I thought I would post this up local first. I decided not to race my SS at the track due to alot of things happening recently, so Im letting these go to someone who can put these to better use. 2 Nitto NT05r drag radials, 305/45/18 - brand new $450 2 Forgestar f14's matte black wheels, 18x10 - brand new $500 Gforce Engineering 300m Race Axles - The original owner had less then 200 miles on them when I got them. I sent them off had them inspected and rebuilt by Gforce to check things over, never put them on since then. $1000 PENDING SALE..* SJM Linelock - brand new $100 SOLD* AR10 II SA2010 black Auto Racing Helmet by HJC size Large- brand new $225* Im located in Half Moon Bay, CA __________________ Powered by Maggie553rwhp 541rwtq Last edited by ddavis; 01-03-2012 at 09:30 AM.

11-02-2011, 11:16 AM	#2
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	willing to ship the helmet and line lock? PM sent __________________

11-02-2011, 11:26 AM	#3
ddavis boostalicious Drives: Blown Ls3 Join Date: May 2010 Location: Bay Area SF Posts: 1,030 View My Garage	pm sent __________________ Powered by Maggie553rwhp 541rwtq

11-02-2011, 11:28 AM	#4
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	pm replied. __________________

11-02-2011, 01:01 PM	#5
The Shadoww Black on Black on Black Drives: 2011 Camaro 1LS Join Date: Jun 2011 Location: Milpitas, CA Posts: 864	What is a line lock used for? i thought it was like a praking break. My buddy has a line lock on his rock crawler and he said it stops your break fluid in the line to keep the wheels from moving (or something like that). Is that what it does on the Camaro too? __________________

11-02-2011, 01:12 PM	#6
ddavis boostalicious Drives: Blown Ls3 Join Date: May 2010 Location: Bay Area SF Posts: 1,030 View My Garage	Yeh, its so you can do a burnout in the box before pulling up to the line easier at the strip. It locks the front brakes by stopping the brake fluid from flowing but leaves your rear tires to spin free so you can put down a nice burnout to warm the tires up. __________________ Powered by Maggie553rwhp 541rwtq

11-02-2011, 01:39 PM	#7
The Shadoww Black on Black on Black Drives: 2011 Camaro 1LS Join Date: Jun 2011 Location: Milpitas, CA Posts: 864	Ahhhhh. I seeeee. Thank you! __________________

11-02-2011, 02:09 PM	#8
ddavis boostalicious Drives: Blown Ls3 Join Date: May 2010 Location: Bay Area SF Posts: 1,030 View My Garage	Linelock is sold! __________________ Powered by Maggie553rwhp 541rwtq

11-04-2011, 12:12 PM	#9
Inferno LSX Supercharged LSX Drives: 2011 2SS/RS Black/Carbon Fiber Join Date: Dec 2010 Location: City of Angels Posts: 6,741 View My Garage	Are the DRs mounted in your F14s? __________________

11-04-2011, 12:15 PM	#10
ddavis boostalicious Drives: Blown Ls3 Join Date: May 2010 Location: Bay Area SF Posts: 1,030 View My Garage	not mounted, the tires still have the sticker on them and the wheels is still in their shipped boxes. I never mounted them. __________________ Powered by Maggie553rwhp 541rwtq

11-04-2011, 04:20 PM	#11
Inferno LSX Supercharged LSX Drives: 2011 2SS/RS Black/Carbon Fiber Join Date: Dec 2010 Location: City of Angels Posts: 6,741 View My Garage	One more question, what's the width of the rims? 18x? __________________

11-04-2011, 04:28 PM	#12
ddavis boostalicious Drives: Blown Ls3 Join Date: May 2010 Location: Bay Area SF Posts: 1,030 View My Garage	18x10 so I could run the 305/45/18's Nitto05r's on them. I went with them for a few reasons. Lighter wheel/tire, cheaper tires then 315's (for when I burn through them), and still plenty wide enough to hook up well at the track with alot of power from what i've seen. __________________ Powered by Maggie553rwhp 541rwtq

11-04-2011, 06:28 PM	#13
Inferno LSX Supercharged LSX Drives: 2011 2SS/RS Black/Carbon Fiber Join Date: Dec 2010 Location: City of Angels Posts: 6,741 View My Garage	Yah I run the exact same tires, but they don't start to really hook till my 3 pass of the day on them. Let me see how finances go next week. It's getting close to the holidays. __________________

11-04-2011, 06:41 PM	#14
ddavis boostalicious Drives: Blown Ls3 Join Date: May 2010 Location: Bay Area SF Posts: 1,030 View My Garage	are you using a linelock to warm them up? __________________ Powered by Maggie553rwhp 541rwtq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 05:20 PM
Tom Henry Racing Announces a Special Edition 2010 Camaro!	TAG UR IT	5th Gen Camaro SS LS LT General Discussions	72	04-30-2009 12:57 PM
Hardcore racers rejoice!! GM Performance Parts to offer new Camaro body in white	radz28	5th Gen Camaro SS LS LT General Discussions	23	12-22-2008 09:57 AM