Hendrix-Engineering hd axles Ready! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Hendrix-Engineering · 06-26-2009, 09:43 PM

Hey guys ,we will be sponcers on this site as soon as they get me the requsted info.We do have our heavy duty axles for the camaro ready to go.These are rated at 1000 hp and are the same desighn we use in our 4000lb gto that runs very low 9s at 153 mph, over a 1000rwhp!We are also testing a drive shaft as well!We will keep you posted and look foward to helping the comunity>

gotpball44 · 06-26-2009, 10:01 PM

whats the price estimate?

Hendrix-Engineering · 06-27-2009, 01:10 AM

Thanks guys!..The make a profit price will be $1999...i will cut a special deal for the first 5 sets for 1599!!!These axles will use the big and bigger bar that i was first to bring to the aftermarket years ago for the gto guys.We have recently entered the ctsv market as well with oustanding results>Please check us out and feel free to ask any questions..

kdoske · 06-27-2009, 11:16 AM

sounds awesome for those guys that are gonna exceed the 600hp rating

Codefive · 06-27-2009, 06:44 PM

I think these are what I've been waiting for.
Please give us a link &/or further info

Jason 98 TA · 06-27-2009, 10:10 PM

what do you think about the center section strength? Do you feel the axles will allow for some 1.4 60's with a good driveshaft, or are we just moving the weak point around?

crail10 · 06-28-2009, 01:20 AM

I am planning on running a tvs 2300 blower on my L99,
and I am trying to make around 500-550 rwhp.

I also plan on driving my car almost every day.

Will these be a good investment for me?

I mean, how much of a chance is there that
I will break stock axles with only 500-600 rwhp?

I want my car to be able to take abuse,
and go into combat with just a moments notice...
...just like an Autobot.

kdoske · 06-28-2009, 10:16 AM

Quote:

Originally Posted by crail10

I am planning on running a tvs 2300 blower on my L99,
and I am trying to make around 500-550 rwhp.

I also plan on driving my car almost every day.

Will these be a good investment for me?

I mean, how much of a chance is there that
I will break stock axles with only 500-600 rwhp?

I want my car to be able to take abuse,
and go into combat with just a moments notice...
...just like an Autobot.

Supposedly the current trans is rated up to 600-650.

Hendrix-Engineering · 06-28-2009, 12:06 PM

Quote:

Originally Posted by Codefive

I think these are what I've been waiting for.
Please give us a link &/or further info

Will do ,ill have some pictures on the website in 2 weeks.

Hendrix-Engineering · 06-28-2009, 12:08 PM

Quote:

Originally Posted by Jason 98 TA

what do you think about the center section strength? Do you feel the axles will allow for some 1.4 60's with a good driveshaft, or are we just moving the weak point around?

These axles are in a 4000 lb gto that has the 60 foot record with a 1.39,axles no problem,diff will see.

Hendrix-Engineering · 06-28-2009, 12:13 PM

Quote:

Originally Posted by crail10

I am planning on running a tvs 2300 blower on my L99,
and I am trying to make around 500-550 rwhp.

I also plan on driving my car almost every day.

Will these be a good investment for me?

I mean, how much of a chance is there that
I will break stock axles with only 500-600 rwhp?

I want my car to be able to take abuse,
and go into combat with just a moments notice...
...just like an Autobot.

I would say if your going to keep the car you will end up over the 550-600 hp your already admiting too!lol..Its early to tell how strong the axles are but the autos will be easier on the axle.One thing for sure you will not see these axles this cheap again once we have sold the first few sets.

Hendrix-Engineering · 06-28-2009, 12:21 PM

I will be glad to help you with your 2300 purchase as well,i am a large volume dealer for magnason and an get you a unbeilievable price on the 2300.We also have acustom cam package for this setup as well.We have built the fastest magnason gtos on the planet including a 9 second six speed!!!

06-26-2009, 09:43 PM	#1
Hendrix-Engineering Account Suspended Drives: First 9 inch-12 bolt IRS Camaro Join Date: Jun 2009 Location: nc Posts: 1,835	Hendrix-Engineering hd axles Ready! Hey guys ,we will be sponcers on this site as soon as they get me the requsted info.We do have our heavy duty axles for the camaro ready to go.These are rated at 1000 hp and are the same desighn we use in our 4000lb gto that runs very low 9s at 153 mph, over a 1000rwhp!We are also testing a drive shaft as well!We will keep you posted and look foward to helping the comunity>

06-27-2009, 11:16 AM	#4
kdoske Waiting For My 1SS/RS SIM Drives: Sold My Lancer, now carless :/ Join Date: Apr 2009 Location: louisiana Posts: 950	sounds awesome for those guys that are gonna exceed the 600hp rating __________________ Order# NJPW8K 1SS/RS SIM Black Interior 1100 (original order date): 04/16/09 2000 (dealer received allocation): 2500 (order preferenced): 3000 (accepted to production): 3300 (scheduled for prod): 3400 (broadcast): 3800 (produced): 4000/4B00 (available to ship/bayed): 4200 (shipped): 4300 (intermediate, may be multiple): Last edited by kdoske; 06-28-2009 at 12:33 AM.

06-28-2009, 12:21 PM	#12
Hendrix-Engineering Account Suspended Drives: First 9 inch-12 bolt IRS Camaro Join Date: Jun 2009 Location: nc Posts: 1,835	Almost forgot!! I will be glad to help you with your 2300 purchase as well,i am a large volume dealer for magnason and an get you a unbeilievable price on the 2300.We also have acustom cam package for this setup as well.We have built the fastest magnason gtos on the planet including a 9 second six speed!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro Pfadt Race Engineering Coil Overs	PfadtRacing	Wheels and Tires Talk Sponsored by The Tire Rack	16	03-29-2011 09:10 PM
#4768 - Delivered and Made Ready the Right Way!	Number_9	5th Gen Camaro SS LS LT General Discussions	62	07-16-2009 02:42 AM
Pedders is Ready for Camaro!!!	Info@PeddersUSA.com	Wheels and Tires Talk Sponsored by The Tire Rack	10	04-15-2009 11:26 PM
Impulse Engineering Ford Mustang GT w/ Garrett GT30-71R Twin Turbos 715hp/730tq	xknowonex	General Automotive + Other Cars Discussion	34	02-27-2009 09:24 AM

06-26-2009, 10:01 PM	#2
gotpball44 Boost Is Your Friend Drives: 2016 Hyper Blue 1SS Camaro Join Date: Oct 2008 Location: La Mirada CA Posts: 1,255 View My Garage	whats the price estimate?

06-27-2009, 01:10 AM	#3
Hendrix-Engineering Account Suspended Drives: First 9 inch-12 bolt IRS Camaro Join Date: Jun 2009 Location: nc Posts: 1,835	Thanks guys!..The make a profit price will be $1999...i will cut a special deal for the first 5 sets for 1599!!!These axles will use the big and bigger bar that i was first to bring to the aftermarket years ago for the gto guys.We have recently entered the ctsv market as well with oustanding results>Please check us out and feel free to ask any questions..

06-27-2009, 06:44 PM	#5
Codefive Drives: 1000HP 2010 SSRS Join Date: Jan 2009 Location: Mt. Airy Maryland Posts: 351	I think these are what I've been waiting for. Please give us a link &/or further info

06-27-2009, 10:10 PM	#6
Jason 98 TA Drives: Camaro Join Date: Apr 2009 Location: Texas Posts: 1,669	what do you think about the center section strength? Do you feel the axles will allow for some 1.4 60's with a good driveshaft, or are we just moving the weak point around?

06-28-2009, 01:20 AM	#7
crail10 Drives: 1969 Camaro (Hit Head On) Join Date: Apr 2009 Location: Maryland Posts: 33	I am planning on running a tvs 2300 blower on my L99, and I am trying to make around 500-550 rwhp. I also plan on driving my car almost every day. Will these be a good investment for me? I mean, how much of a chance is there that I will break stock axles with only 500-600 rwhp? I want my car to be able to take abuse, and go into combat with just a moments notice... ...just like an Autobot.