04-26-2018, 09:04 AM | #43 |
Drives: 2018 Camaro ZL1-1LE Join Date: Mar 2018
Location: NC
Posts: 3
|
Schroth Rallye 4 asm harness
I had the Schroth harness installed last weekend for a track event at VIR. It held me in the seat almost as well as a conventional harnesses set up. I used it with the Hybrid S device from Simpson.
FYI - Some organizations will not allow the Schroth harness (PCA for example), so leave the 3 point belts in place. |
04-26-2018, 11:47 AM | #44 |
How did the Simpson Hybrid S feel, comfort wise with the Recaro's? I'm planning on going down the same path. Schroth's and Hybrid set up.
To add - The Hybrid S is the only approved "head and neck restraint system" for 3pt belt set up. Also I saw someone concerned about 4pts and submarining. The Schroth have a special feature built in that other 4pt belts don't that prevent this from happening.
__________________
2018 ZL1 - Garnet Red, NO Sunroof, A10, PDR, Carbon hood insert = Perfect
Last edited by Exgermanowner; 04-26-2018 at 01:49 PM. |
|
07-13-2018, 01:41 PM | #45 | |
2018 Camaro ZL1 1LE
Drives: 2018 Camaro ZL1 1LE Join Date: Jan 2018
Location: Orlando
Posts: 10
|
Quote:
The places where it seems like I should bolt to the floor by the front seat don't agree with the angle of the harness points and the rear - I'm not sure where you connected those and how. |
|
02-16-2019, 09:39 AM | #46 |
|
|
02-16-2019, 06:05 PM | #47 |
Drives: 2018 ZL1/1LE Join Date: Jul 2018
Location: SOUTH CAROLINA
Posts: 50
|
I went with a RPM cage for my set up and 5 point harness from my 5th gen. Did the install last month so haven’t been out on track yet to see how it works but a lot safer 😉 Also Haylon fire extinguisher and helmet hook.
Nice fit and power coat finish with their bars.
__________________
|
02-16-2019, 10:43 PM | #48 |
Drives: Grandad's C2 L89 Join Date: May 2017
Location: 20*51.50N 156*29.60W
Posts: 1,711
|
Nice set up.
I'm surprised that halon/halocarbon is still available in automotive applications. FWIW, we have been required to use FM200 and FE241 in marine applications for years. Likely an confined space thing.
__________________
2018 ZL1 1LE sw/PDR
|
02-17-2019, 07:57 AM | #49 |
Drives: 2018 ZL1/1LE Join Date: Jul 2018
Location: SOUTH CAROLINA
Posts: 50
|
Yes, have a local fire extinguishers company that carry it.
__________________
|
02-17-2019, 12:48 PM | #50 |
Drives: Grandad's C2 L89 Join Date: May 2017
Location: 20*51.50N 156*29.60W
Posts: 1,711
|
__________________
2018 ZL1 1LE sw/PDR
|
12-23-2020, 05:40 AM | #51 |
Drives: 2017 SS 1LE Join Date: Mar 2017
Location: Florida
Posts: 617
|
I called schroth technical support this week. As others stated, quick fit is a no go. But, we talked for 15 minutes and the Rallye 3 ASM will.work. Also I have used the Simpson hybrid S for two years, which Schroth stated will work with the set up. My issue is the amount of energy I spend trying to stay in the seat. Will advise.
|
05-18-2021, 02:40 PM | #52 |
Who Needs to KNOW?
Drives: 18 ZLE Join Date: May 2018
Location: Left Side of the Moon
Posts: 1,771
|
Schroth will keep telling you that until they test it with camaro environment, ie seats, anchor points.
__________________
ing for grip.
Are you in the NY/NJ/PA/CT region? Join us for autox fun at MetLife Stadium. HUGE lots, tons of runs. http://www.motorsportsne.com/ |
05-18-2021, 04:27 PM | #53 |
Drives: 2017 SS 1LE Join Date: Mar 2017
Location: Florida
Posts: 617
|
I installed the 3 point asm on top of the stock belts. Works well with hybrid, belt clip to keep airbags active. Really keeps you in your seats...
|
|
|
Post Reply
|
|
|