Roto-Fab CAI Install - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

I8A4RE · 06-16-2009, 06:47 PM

Just installed my Roto-Fab CAI & thought I would post a few photos. I instantly noticed a change in the exhaust sound, but have not really gotten into it yet as the car is not thru break in period. Also installed some cosmetic pieces, also made by Roto-Fab. Looks a good bit better than stock.

davidj · 06-16-2009, 07:03 PM

Very cool to see people starting to customize.

Man those pics make the stock engine look....well....stock.

NickPic · 06-16-2009, 07:11 PM

looks pretty good. nice job

live2well · 06-16-2009, 07:43 PM

ok how much because its not on their webpage

carfansince73 · 06-16-2009, 07:43 PM

Looks great! So I guess no reading on the butt dyno since it's not broken in. :(

Legend · 06-16-2009, 08:05 PM

How hard was it to paint the center section?

How much for those covers?

C6Z06dude · 06-16-2009, 08:34 PM

I actually like how it looks stock but I don't see noithing wrong by customizing.

*GTAHVIT* · 06-16-2009, 08:40 PM

Nice stuff.

cheesesauce · 06-16-2009, 08:51 PM

Too bright, too much going on IMO

Zeus95 · 06-17-2009, 06:44 AM

Looks good !

shevyman · 06-17-2009, 07:09 AM

ok but the flames have to go. waiting for mine from K&N. also in the next couple of month mine will be under construction getting it ready for SEMA will post pics

REAPER SS · 06-17-2009, 08:13 AM

Looks good

35th02ss · 06-17-2009, 08:17 AM

very nice !!!!

Xmicro_SS · 06-17-2009, 08:23 AM

Graphics are nice, not my taste, bet well done.

The problem I always have with "Cold Air Intakes" is, the factory air tube coming from the engine is plastic, which does not pick up much heat from around it. Then you put a metal Pipe in there going to a Cone Filter. The Metal tube must pick up heat from around it. Maybe you get more air through the cone, so that may help, but what about the heat soak issue??

And how much different is the temperature in the "Cone Section" than in the engine bay right outside that section?

06-16-2009, 06:47 PM	#1
I8A4RE Drives: Yellow 2010 Camaro 2SS Join Date: Jun 2009 Location: Warren, Indiana Posts: 8 View My Garage	Roto-Fab CAI Install Just installed my Roto-Fab CAI & thought I would post a few photos. I instantly noticed a change in the exhaust sound, but have not really gotten into it yet as the car is not thru break in period. Also installed some cosmetic pieces, also made by Roto-Fab. Looks a good bit better than stock.

06-16-2009, 07:03 PM	#2
davidj Drives: . Join Date: Mar 2009 Location: Ventura, Ca Posts: 327	Very cool to see people starting to customize. Man those pics make the stock engine look....well....stock. __________________

06-16-2009, 07:11 PM	#3
NickPic Drives: 2006 GMC Sierra 1500HD Join Date: May 2009 Location: ROckland, NY Posts: 161	looks pretty good. nice job __________________ 06 gmc sierra 1500HD: w/ 6.0, K&N CAI, air raid TBS, pacesetter ceramic coated LT headers, magnaflow X-pipe, SLP loudmouth I resonators, gibson 4' tips, blackbear custom tune, 20 inch rims, bfg 33" tires, 2-10" mtx subs, 2000 watt audiobahn amp, 10 farad tsunami cap, HID's, air horns etc...... http://www.cardomain.com/ride/3103872 slp tuned diablo programmer for sale. pm me for info. 06 pontiac G6 GT: bone stock except hid's

06-16-2009, 07:43 PM	#4
live2well Drives: 2010 VR 2SS/RS A6 Join Date: Oct 2008 Location: Odenton, MD Posts: 688	ok how much because its not on their webpage __________________ Intelligence plus character that is the goal of true education. BrianC. :flag2:

06-16-2009, 07:43 PM	#5
carfansince73 Drives: Carefully Join Date: Mar 2008 Location: Florida Posts: 1,213 View My Garage	Looks great! So I guess no reading on the butt dyno since it's not broken in. :( __________________ 2010 1SS RS, LS3, SIM/Black, painted rally stripes, AAC sidemarkers, Sunroof, B.A. sound sys; 20x9.5 & 20x11 SV1-C5's; MGW short shifter; Hotchkis Track Pack; Corsa catback; Kooks 1 7/8"; ADM Street; Magnacharger TVS2300 - 548rwhp/512rwtq 1100- 2/18/09; 3800- 6/15/09 VIN#18308; Delivered 6/29/09!!!!! 2014 CTS-V Sedan, Black/Black, Auto, Recaros, Ultra-view, Red Brembos. Stock

06-16-2009, 08:05 PM	#6
Legend Hello! Drives: 2008 JSB Z06! Join Date: Oct 2008 Location: Texas Posts: 2,624 View My Garage	How hard was it to paint the center section? How much for those covers?

06-16-2009, 08:34 PM	#7
C6Z06dude Drives: 2009 C63 AMG,06 Evo,07 VW GLI, Join Date: Jun 2009 Location: Tucson, AZ Posts: 49	I actually like how it looks stock but I don't see noithing wrong by customizing. __________________ 09 Mercedes Benz C63 AMG 12.9@111.04 mph stock at SIR(Tucson 3100ft) Currently 12.3@118.59 mph with tune , headers and air filters Previous car> 08 Z06 with cams, heads,headers and other minor stuff

06-16-2009, 08:40 PM	#8
GTAHVIT Blessed Drives: 2013 Sonic RS MT Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,444 View My Garage	Nice stuff. __________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

06-16-2009, 08:51 PM	#9
cheesesauce Drives: 2SS/RS Join Date: Oct 2008 Location: Pembroke Pines, Fl Posts: 70	Too bright, too much going on IMO

06-17-2009, 06:44 AM	#10
Zeus95 Drives: IOM 2010 - 2SS/RS Join Date: Nov 2008 Location: Oak Forest - ILL Posts: 1,124 View My Garage	Looks good ! __________________ 2010 2SS/RS IOM Upgrades: Fastlane CAI / SLP II Loudmouth axle back / V Max Ported TB / Kook's Step Long Tube Headers / High flow cats / Straightline Tune / BMR front & rear sway bars / Hotchkin End Links / Hurst Short Throw. LG ZR28 Wheels 1 of 2 sets made. Pfadt trailing arms / Diff Bushings & Sub Frame bushings / 1LE Axle & Hubs.

06-17-2009, 07:09 AM	#11
shevyman Drives: 2010 Camaro SS IOM Join Date: Feb 2009 Location: california Posts: 1,734 View My Garage	ok but the flames have to go. waiting for mine from K&N. also in the next couple of month mine will be under construction getting it ready for SEMA will post pics

06-17-2009, 08:13 AM	#12
REAPER SS Drives: 2010 CAMARO BLK 2SS/L99 Join Date: May 2009 Location: Birmingham,Al Posts: 453	Looks good

06-17-2009, 08:17 AM	#13
35th02ss Drives: 02 SS Join Date: Jan 2007 Location: Wallops Island, VA Posts: 760 View My Garage	very nice !!!!

06-17-2009, 08:23 AM	#14
Xmicro_SS Thank You GM Drives: Sky Redline & Camaro 2SS/RS Join Date: Mar 2009 Location: Las Vegas, NV Posts: 2,876	Graphics are nice, not my taste, bet well done. The problem I always have with "Cold Air Intakes" is, the factory air tube coming from the engine is plastic, which does not pick up much heat from around it. Then you put a metal Pipe in there going to a Cone Filter. The Metal tube must pick up heat from around it. Maybe you get more air through the cone, so that may help, but what about the heat soak issue?? And how much different is the temperature in the "Cone Section" than in the engine bay right outside that section? __________________ ITS HERE! : 2010 Camaro 2SS / 6 Speed Manual (No other way) / Silver Ice Metallic / Inferno Orange Interior Accent / RS Package / Polished Wheels / SOLO MACH X CAT BACK

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official 1/4 Mile (V8) 2010+ Camaro Fast List	Merc	Dragstrip and Launch Techniques Discussion	3652	08-17-2023 02:50 PM
Questions on CAI and Break-In	paulv7260	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	4	05-25-2009 07:04 PM
True vs. Conventional CAI systems.	Kyle2k	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	17	05-18-2009 08:11 PM
Ground Effects Install?	franknbeans	Cosmetics and Lighting Modification Discussions	16	05-04-2009 03:46 PM
LS3 goes 11`s Bonestock!	GMRULZ	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	28	12-08-2008 09:10 PM