Timing bushings with new suspension components - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Jiver11 · 03-18-2018, 10:34 AM

Lowered car this weekend and am getting ready to set ride height and then time the bushings.

I have installed new LCA’s, toe rods, trailing arm and was wondering if I need to time those bushings or if I can go ahead and torque those bolts down? I would assume I can go ahead and torque them down due to the bushings not being “seated” in the new components but wasn’t 100% sure.

JusticePete · 03-20-2018, 09:33 AM

Urethane bushings that rotate around the ferule do not require bush timing.

03-18-2018, 10:34 AM	#1
Jiver11 Drives: 2014 Chevrolet Camaro 1SS Join Date: May 2016 Location: Iowa Posts: 117	Timing bushings with new suspension components Lowered car this weekend and am getting ready to set ride height and then time the bushings. I have installed new LCA’s, toe rods, trailing arm and was wondering if I need to time those bushings or if I can go ahead and torque those bolts down? I would assume I can go ahead and torque them down due to the bushings not being “seated” in the new components but wasn’t 100% sure. __________________

03-20-2018, 09:33 AM	#2
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	Urethane bushings that rotate around the ferule do not require bush timing.