03-09-2013, 03:56 PM | #1 |
Havoc Diffuser
Betty got a butt lift today....Install was pretty stright forward but did have to trim some part to fit...
|
|
03-09-2013, 09:09 PM | #2 |
dat ass
|
|
03-10-2013, 10:08 AM | #3 |
Drives: RED@2SS Join Date: Aug 2010
Location: UAE
Posts: 1,372
|
good choice man
__________________
|
03-10-2013, 10:40 AM | #4 |
Drives: Silver 2010 SS Camaro Join Date: Jul 2009
Location: TN
Posts: 2,562
|
What did you have to trim? Mine has a little gap at the top that I need to close up.
__________________
MODS:
ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq |
03-10-2013, 10:57 AM | #5 |
I had to trim the inner piece where they fit in the slots to allow the clips enough tab to grab on too.
|
|
03-10-2013, 11:42 AM | #6 |
Drives: Silver 2010 SS Camaro Join Date: Jul 2009
Location: TN
Posts: 2,562
|
Gotcha, I think that may be what I need to do so it will fit up against the car better.
__________________
MODS:
ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq |
03-10-2013, 03:19 PM | #7 |
Drives: '10 SS Join Date: Nov 2011
Location: Bay Area
Posts: 175
|
I like big butts and I can not lie, you other brothers can't deny
Btw, nice diffuser |
03-10-2013, 04:29 PM | #8 |
That diffuser looks awesome! I need to get myself one of those
|
|
03-10-2013, 04:32 PM | #9 |
Looks great! LOVE those rims!
__________________
2010 Camaro 2SS/RS IOM 6 SPD LS3
|
|
03-10-2013, 04:37 PM | #10 |
Drives: 2012 45th Camaro Join Date: Jul 2012
Location: Canton, Ohio
Posts: 14
|
Nice, I was looking to get one. It says it is ready to paint, did you paint yours, does it look the same as the original without paint?
thanks |
03-10-2013, 11:08 PM | #11 |
Yes I had it painted to match the car IBM on the outer area and then gloss black on the inner part it really looks good will need to get some better pictures to show you.
|
|
|
|
|
|