Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
dave@hennessey
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis


Reply
 
Thread Tools
Old 06-03-2011, 10:54 AM   #1
MTI Racing Kevin
 
MTI Racing Kevin's Avatar
 
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Marietta, GA
Posts: 525
Hotchkis Strut Tower Brace Clears Magnacharger

Check out the Chassis Max Strut Tower Brace from Hotchkis for your 2010-2011 Camaro. This is the only strut tower brace that will clear the Magnuson Supercharger system.

Strut tower braces are a very important to the handling of your Camaro. With the addition of a Hotchkis strut tower brace you will reduce sub-frame flex, increase chassis rigidity and improve handling responsiveness. And if that is not enough it will clear the factory engine shield and Magnuson Supercharger and it looks awesome under the hood.

Features:
-Fabricated from strong, lightweight 1-¼” DOM steel tubing with laser cut brackets and gussets
-Four-point mounting system for maximum strut tower strength
-Works with naturally aspirated and Magnuson superchargers
-Straightforward installation with included hardware package
-Finished in durable semi-gloss black powder coat

Benefits:
-Reduces sub-frame flex, which makes the suspension work better.
-Increases chassis rigidity, so you can corner flatter and faster.
-Improves handling responsiveness for better race times.
-Will clear Factory engine shield and Magnuson superchargers.

Application Note: This application has been designed and tested to work on the V8 models. Will not fit Vortech or Kenne Bell supercharger. Will not fit V6.

Follow this link to the vendors area for summer savings.


Hotchkis Strut Tower Brace

Hotchkis Strut Tower Brace will clear the Magnacharger TVS Supercharger



Last edited by MTI Racing Kevin; 06-03-2011 at 11:38 AM.
MTI Racing Kevin is offline   Reply With Quote
Old 06-03-2011, 11:09 AM   #2
Inferno LSX
Supercharged LSX
 
Inferno LSX's Avatar
 
Drives: 2011 2SS/RS Black/Carbon Fiber
Join Date: Dec 2010
Location: City of Angels
Posts: 6,741
I wanna see if it clears a Whipple Charger.
__________________
Inferno LSX is offline   Reply With Quote
Old 06-03-2011, 11:26 AM   #3
2010 SSRS



 
2010 SSRS's Avatar
 
Drives: 3 V8 Camaros
Join Date: May 2009
Location: The Ocean State
Posts: 111,187
Looks good
__________________
Jannetty Racing JRE Street Package
2010 SSRS is offline   Reply With Quote
Old 06-03-2011, 11:31 AM   #4
RickRay
INJACC
 
RickRay's Avatar
 
Drives: 2010 CGM 2LT/RS AUTO
Join Date: Jan 2009
Location: Montreal (South Shore)Quebec, Canada
Posts: 6,518
Quote:
Originally Posted by MTI Racing Kevin View Post
Check out the Chassis Max Strut Tower Brace from Hotchkis for your 2010-2011 Camaro. This is the only strut tower brace that will clear the Magnuson Supercharger system.

Strut tower braces are a very important to the handling of your Camaro. With the addition of a Hotchkis strut tower brace you will reduce sub-frame flex, increase chassis rigidity and improve handling responsiveness. And if that is not enough it will clear the factory engine shield and Magnuson Supercharger and it looks awesome under the hood.

Features:
-Fabricated from strong, lightweight 1-¼” DOM steel tubing with laser cut brackets and gussets
-Four-point mounting system for maximum strut tower strength
-Works with naturally aspirated and Magnuson superchargers
-Straightforward installation with included hardware package
-Finished in durable semi-gloss black powder coat

Benefits:
-Reduces sub-frame flex, which makes the suspension work better.
-Increases chassis rigidity, so you can corner flatter and faster.
-Improves handling responsiveness for better race times.
-Will clear Factory engine shield and Magnuson superchargers.

Application Note: This application has been designed and tested to work on the V8 models. Will not fit Vortech or Kenne Bell supercharger. Will not fit V6.

Follow this link to the vendors area for summer savings.


Hotchkis Strut Tower Brace

Hotchkis Strut Tower Brace will clear the Magnacharger TVS Supercharger


It WILL FIT the V6 no problem...I have one on for a year now...
__________________
Member of 'Club Elite' #70
2LT/RS Auto / Solo HFC / Solo Mach X-LLT J-Pipe / JBA Headers Shorty
CAI - Cold Air Inductions / VMAX TB / Trifecta Tune
Hotchkis Max Strut Brace / Blade Dovetail Spoiler / Elite Catch Can
ACS T3 Hood Ports / T2 Bumper Ports / T2 Splitter / ACS T1 Led Light Kit
ACS Rockers / ACS Composite Hood Liner / ACS Upper Rear Quarter Ports
ACS Front Wheel Mud Flaps / ACS Rear Wheel Mud Flaps / Vitesse Throttle Controller
Pedders Drop Suspension / BMR Lower Control Arms / Style 41 ZL1 Wheels /
Oracle Afterburners / Oracle Concept SMD Side markers
Complete SS Brembo Brakes Set
RickRay is offline   Reply With Quote
Old 06-03-2011, 12:59 PM   #5
MTI Racing Kevin
 
MTI Racing Kevin's Avatar
 
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Marietta, GA
Posts: 525
Quote:
Originally Posted by RickRay View Post
It WILL FIT the V6 no problem...I have one on for a year now...
You are correct RickRay. Thanks.
MTI Racing Kevin is offline   Reply With Quote
Old 06-09-2011, 09:51 AM   #6
Hotchkis
 
Drives: 1st through 5th gen Camaros
Join Date: Sep 2009
Location: Sante Fe Springs, CA
Posts: 458
Quote:
Originally Posted by RickRay View Post
It WILL FIT the V6 no problem...I have one on for a year now...
Rick Ray - do you have pictures of your Hotchkis Chassis Max Strut Tower Brace installed on your V-6 Camaro?

The Hotchkis Chassis Max Strut Brace fits with the Whipple and Magnuson supercharger. Here's a picture to show how it fits with the Whipple.

Hotchkis is offline   Reply With Quote
Old 06-09-2011, 03:32 PM   #7
MTI Racing Kevin
 
MTI Racing Kevin's Avatar
 
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Marietta, GA
Posts: 525
PMs sent.
MTI Racing Kevin is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hotchkis Strut Tower Brace for Magnacharger Available at MTI Racing MTI Racing Kevin Suspension / Chassis / Brakes 0 01-27-2011 11:33 AM
Strut Tower Brace Clears Magnuson Superchargers MTI Racing MTI Racing Kevin Suspension / Brakes / Chassis 0 01-26-2011 04:00 PM
MTI Racing Strut Tower Brace FREE SHIPPING MTI Racing Kevin Suspension / Chassis / Brakes 5 09-17-2010 10:42 AM
MTI Racing Strut Tower Brace MTI Racing Kevin Suspension / Brakes / Chassis 0 06-28-2010 12:57 PM
DEAL OF THE DAY - HOTCHKIS STRUT TOWER BRACE! MoranoRacing Suspension / Chassis / Brakes 0 06-08-2010 09:58 AM


All times are GMT -5. The time now is 10:47 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.