Stainless Steel exhaust Fabricator ? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

lvlender · 08-01-2021, 12:08 PM

I live in west suburb of Knoxville, TN.

Anyone know of a welding/fabrication shop to T.I.G. weld
Stainless steel exhaust pipe?

Thanks !

gtstorey · 08-09-2021, 08:56 AM

If all you need is it welded, I would think about any welding shop can handle it.

SSammy · 08-09-2021, 09:56 AM

Most decent muffler shops can MIG weld stainless. A shop that’ll TIG it will be more difficult to find and more expensive. Just make sure they are not using flux core, and they have the correct wire (I used 308L to mig my 304ss exhaust) and the correct gas (straight argon, argon mix, or a suitable tri-mix).

08-01-2021, 12:08 PM	#1
lvlender Drives: 2010 2SS/RS Camaro Join Date: Dec 2020 Location: Tellico Village TN Posts: 16	Stainless Steel exhaust Fabricator ? I live in west suburb of Knoxville, TN. Anyone know of a welding/fabrication shop to T.I.G. weld Stainless steel exhaust pipe? Thanks !

08-09-2021, 08:56 AM	#2
gtstorey Drives: 2010 Camaro SS2,L99, LSA SC Join Date: Aug 2017 Location: Huntsville, AL Posts: 2,151	If all you need is it welded, I would think about any welding shop can handle it.

08-09-2021, 09:56 AM	#3
SSammy Drives: 2015 2SS A6 Commemorative Edition Join Date: Nov 2019 Location: Utah Posts: 433 View My Garage	Most decent muffler shops can MIG weld stainless. A shop that’ll TIG it will be more difficult to find and more expensive. Just make sure they are not using flux core, and they have the correct wire (I used 308L to mig my 304ss exhaust) and the correct gas (straight argon, argon mix, or a suitable tri-mix).