Pyr0b0y's SS Build Thread [COTW 5/23/11] - Page 46 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2SSRS@Gen5diy · 02-07-2012, 08:05 PM

Have you look in to the ZL1 diff?

pyr0b0y · 02-08-2012, 10:46 AM

Quote:

Originally Posted by 2SSRS

Have you look in to the ZL1 diff?

Do you have any info on it? I think I'll still have issues with that diff. With higher boost the car will go over 1000whp and I dont want to have to replace the diff at a later date.

*Mindz* · 02-08-2012, 12:34 PM

I thought you had a fully built driveline. You built everything else up and left the pumpkin?

pyr0b0y · 02-08-2012, 12:44 PM

Quote:

Originally Posted by Mindz

I thought you had a fully built driveline. You built everything else up and left the pumpkin?

pretty much, I have the 1-piece driveshaft from DSS and the 1400hp axles as well, but the axels snapped ~900whp and need to be sent in for warranty and burned up a diff pretty fast, so this is my second one.

I'm looking at other options besides DSS because of the cost.

surprisingly my tranny has held up fine so far.

Falundir · 02-09-2012, 01:06 PM

I'm really happy to see you are finally getting some enjoyment out of this car.

butters · 02-12-2012, 07:39 PM

Not sure if this has been asked yet but where did you get the LEDs from? Are those ports just left open?

pyr0b0y · 02-13-2012, 02:38 PM

Quote:

Originally Posted by butters

Not sure if this has been asked yet but where did you get the LEDs from? Are those ports just left open?

You'd have to contact 2SSRS about where the LED bar came from. The ports are open for now; I think 2 lights in that port looks stupid, so im getting the bezel and creating brake ducting and will have the LEDs flushmounted into the bezel.

Car made it onto the RKSport website:

http://www.rksport.com/main/part_det...mdid=1&catid=4

cyberLS · 02-13-2012, 02:46 PM

Quote:

Originally Posted by pyr0b0y

You'd have to contact 2SSRS about where the LED bar came from. The ports are open for now; I think 2 lights in that port looks stupid, so im getting the bezel and creating brake ducting and will have the LEDs flushmounted into the bezel.

Car made it onto the RKSport website:

http://www.rksport.com/main/part_det...mdid=1&catid=4

but super old photos

pyr0b0y · 02-13-2012, 02:48 PM

Quote:

Originally Posted by cyberLS

but super old photos

it is and finally got around to checking out their site again; they were taken when i first got the hood!

2SSRS@Gen5diy · 02-13-2012, 04:02 PM

Quote:

Originally Posted by butters

Not sure if this has been asked yet but where did you get the LEDs from? Are those ports just left open?

I sent you a link.

tr1gger · 02-14-2012, 01:11 PM

Quote:

Originally Posted by pyr0b0y

Car made it onto the RKSport website:

http://www.rksport.com/main/part_det...mdid=1&catid=4

Something don't look right

pyr0b0y · 02-15-2012, 11:01 AM

Car is at Blu808 to get a new set of rotors today as the last set were pretty warped. I decided to go with the slotted Granatelli rotors and hopefully that will fix the vibration I'm getting around 110+mph. If it doesn't, then it's inline for a full 9" kit from DSS.

She's also getting a front tow hook installed today; custom fabricated in house at Blu808. I've been doing more and more track days lately and everyone recommends I have one. Hopefully I never have to use it but I will eventually!

Car's going in for detail tomorrow for WekFest and getting finishing touches on Friday. Should be a fun weekend.

Revo1 · 02-15-2012, 01:12 PM

Expect mail tonight mang!

pyr0b0y · 02-15-2012, 01:18 PM

Quote:

Originally Posted by Revo1

Expect mail tonight mang!

Cool thanks Ben, running down to the last minute as always with my car; hopefully I'll get it made in time!

View Poll Results: T Tops or Carbon Fiber?
T Tops	14	73.68%
Carbon Fiber Conversion (Fenders, doors, etc)	5	26.32%
Voters: 19. You may not vote on this poll

02-08-2012, 12:34 PM	#633
Mindz E.B.A.H. Drives: you wild... Join Date: Mar 2007 Location: In the happy padded room wearing a jacket that makes me hug myself... Posts: 18,421	I thought you had a fully built driveline. You built everything else up and left the pumpkin? __________________ Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1

02-15-2012, 11:01 AM	#642
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	Car is at Blu808 to get a new set of rotors today as the last set were pretty warped. I decided to go with the slotted Granatelli rotors and hopefully that will fix the vibration I'm getting around 110+mph. If it doesn't, then it's inline for a full 9" kit from DSS. She's also getting a front tow hook installed today; custom fabricated in house at Blu808. I've been doing more and more track days lately and everyone recommends I have one. Hopefully I never have to use it but I will eventually! Car's going in for detail tomorrow for WekFest and getting finishing touches on Friday. Should be a fun weekend. __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

02-15-2012, 01:12 PM	#643
Revo1 Don't Like it? Suggit. Drives: 2010 2SS/RS Join Date: Aug 2008 Location: Fresno, CA Posts: 14,832 View My Garage	Expect mail tonight mang! __________________ "Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3rd Gen Camaro Street Stock build thread (dialup beware)	zlathim	3rd Generation Camaros	9	12-06-2018 10:30 AM
Tom Henry Racing THR22 2010/LS3/IBM/Supercharged SS Camaro [COTW 10/29/12]	GTAHVIT	Member Car Journals	5217	06-27-2016 08:14 AM
Do you want the Z28?	ChrisB	Camaro ZL1 Forum - ZL1 Specific Topics	1616	09-04-2010 11:49 PM
Anyone in St. Louis want a black SS March build Camaro	Sean_W	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	11	03-08-2009 01:31 PM

02-07-2012, 08:05 PM	#631
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	Have you look in to the ZL1 diff?

02-09-2012, 01:06 PM	#635
Falundir Drives: 2017 1SS 1LE - Hyper Blue, P85DL Join Date: Jul 2011 Location: East Bay Posts: 2,189 View My Garage	I'm really happy to see you are finally getting some enjoyment out of this car.

02-12-2012, 07:39 PM	#636
butters Drives: 2010 2SS/RS L99 Join Date: Jul 2011 Location: Chicago, IL Posts: 1,139 View My Garage	Not sure if this has been asked yet but where did you get the LEDs from? Are those ports just left open?