2013 wheel upgrade from 18" to 20x8.5 up front - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Reactor · 06-19-2018, 08:54 PM

Hello guys, I have a 2013 Camaro LS and want to do the SS brembo break upgrade as well as some new 20x8.5 front and 20x9.5 rear ZL1 replicas. My question is on the site that I want to purchase the rims they have this warning : Chevrolet Camaro 1LS, 2LS, 1LT, 2LT 2010-Current. Fitment guaranteed for stock equipped vehicles only. Will not fit SS or ZL1. Does NOT fit vehicles equipped with upgraded or performance brakes such as Brembo. Upgrading to a staggered application on a non-staggered vehicle may require programming modifications by your dealer for 2010-2011 models. Since they are 20's is there a fitment issue using a 20x8.5 rim with the SS Brembo break upgrade?

Wheel Size: Front 20x8.5 / Rear 20x9.5
Offset: Front 35 / Rear 40
Bolt Pattern: 5x120
Hub Size: 67.1

Thanks

Avenging Orange · 06-19-2018, 09:39 PM

ZL1 replicas that won't fit an SS or ZL1? Think I'd find another retailer.

Reactor · 06-19-2018, 10:47 PM

Well the wheels are not the same size. The ZL1 has 20x10 and 20x11 rear. These are 20x8.5 front 20x9.5 rear made for the V6. Not sure if the 8.5 width of the rim has the clearance for the stock SS brembos.

raybob9289 · 07-03-2018, 11:42 AM

so the standard 2010 20" SS wheels will fit on LS V6 Camaro ?????

I have the Stock set of 20" SS wheels from my 10 SS and someone wants
to buy them for theyre 2012 LS V6 Camaro

Thanks

06-19-2018, 08:54 PM	#1
Reactor Drives: 2013 CHevy Camaro LS V6 Join Date: Feb 2018 Location: San Antonio Posts: 3	2013 wheel upgrade from 18" to 20x8.5 up front Hello guys, I have a 2013 Camaro LS and want to do the SS brembo break upgrade as well as some new 20x8.5 front and 20x9.5 rear ZL1 replicas. My question is on the site that I want to purchase the rims they have this warning : Chevrolet Camaro 1LS, 2LS, 1LT, 2LT 2010-Current. Fitment guaranteed for stock equipped vehicles only. Will not fit SS or ZL1. Does NOT fit vehicles equipped with upgraded or performance brakes such as Brembo. Upgrading to a staggered application on a non-staggered vehicle may require programming modifications by your dealer for 2010-2011 models. Since they are 20's is there a fitment issue using a 20x8.5 rim with the SS Brembo break upgrade? Wheel Size: Front 20x8.5 / Rear 20x9.5 Offset: Front 35 / Rear 40 Bolt Pattern: 5x120 Hub Size: 67.1 Thanks

06-19-2018, 09:39 PM	#2
Avenging Orange Drives: 2010 Inferno Orange 2SS/RS Join Date: Apr 2010 Location: Clermont, IN Posts: 3,297	ZL1 replicas that won't fit an SS or ZL1? Think I'd find another retailer. __________________ 2010 Inferno Orange 2SS/RS M6 Black Leather, Sun Roof, OBX Headers, Borla touring axle back, Cold Air Inductions CAI , non synthetic fluids, BMR total bushing upgrade/1" lowering springs, DSE 32mm rear sway bar. GM fe4 shocks/struts/LCA's, AAM 3.91 diff, Vertini RFS1.8 20x9 +30. Conti ExtremeContact Sport 275/35/20. sjm autoprod ABL dash kit. Mike Norris tuned 413/419. Avenging Orange: 43 years of not buying into the Hype........and damn proud of it!! https://youtu.be/9JD9it6SmB8 https://youtu.be/xmelTlEzI34 KICKING CANCERS ASS SINCE 2015!!

06-19-2018, 10:47 PM	#3
Reactor Drives: 2013 CHevy Camaro LS V6 Join Date: Feb 2018 Location: San Antonio Posts: 3	Well the wheels are not the same size. The ZL1 has 20x10 and 20x11 rear. These are 20x8.5 front 20x9.5 rear made for the V6. Not sure if the 8.5 width of the rim has the clearance for the stock SS brembos. Attached Images

07-03-2018, 11:42 AM	#4
raybob9289 Drives: 2010 2SS Join Date: Dec 2007 Location: Littleton, CO. Posts: 6	20" SS wheels on LS (V6 Camaro) so the standard 2010 20" SS wheels will fit on LS V6 Camaro ????? I have the Stock set of 20" SS wheels from my 10 SS and someone wants to buy them for theyre 2012 LS V6 Camaro Thanks __________________ RayBob NASA AI #43 1996 Camaro SS http://americanironracing.com/