Bosch 210lb/hr injectors - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ecreps · 04-10-2018, 07:48 PM

Just wondering if any of you have any experience with these. Mostly wondering if they will idle ok on pump gas. Planning to run E85 the majority of the time, but would like the ability to run Straight 93 as well.

http://www.vsracing.net/catalog/prod...oducts_id=1397

CGbambam · 04-11-2018, 08:02 AM

They run fine, been running them over a year no problem. They just don't come with injector data which some tuners hate, and you need a little adapter pigtail since they aren't ev6. I even flowtested them prior to installation and they all checked out fine

2010_camaro · 04-11-2018, 08:31 AM

Im also running them. Idles fine and runs fine. Setting on 22lbs of boost and 53% duty cycle.
For $350 You can't beat them. Casper Electronics makes the adapter for the Denso to Ev6.

ttshovel · 04-11-2018, 07:04 PM

same, I'm using them but have yet to start it.

fif_gen_powa · 04-12-2018, 05:10 PM

The sloppy mechanics guys use those made 1000+ on e85

That's what I'll use if/when I max out my 1000s

ecreps · 04-12-2018, 06:05 PM

Quote:

Originally Posted by fif_gen_powa

The sloppy mechanics guys use those made 1000+ on e85

That's what I'll use if/when I max out my 1000s

I just wondered if idle on pump gas would be under the minimum pulsewidth. Import guys seem to have some issues with it, but they are generally only around 500cc/cyl.

These injectors with a pwm walbro 450 seem like a good budget fuel setup.

fif_gen_powa · 04-12-2018, 08:27 PM

Quote:

Originally Posted by ecreps

I just wondered if idle on pump gas would be under the minimum pulsewidth. Import guys seem to have some issues with it, but they are generally only around 500cc/cyl.

These injectors with a pwm walbro 450 seem like a good budget fuel setup.

what is this pump gas you speak of, never heard of it

04-10-2018, 07:48 PM	#1
ecreps Drives: 2014 1LE, 1996 z28 Join Date: May 2015 Location: United States Posts: 172	Bosch 210lb/hr injectors Just wondering if any of you have any experience with these. Mostly wondering if they will idle ok on pump gas. Planning to run E85 the majority of the time, but would like the ability to run Straight 93 as well. http://www.vsracing.net/catalog/prod...oducts_id=1397

04-11-2018, 08:31 AM	#3
2010_camaro Drives: 2014 Camaro SS Join Date: May 2011 Location: Florence, KY Posts: 2,238 View My Garage	Im also running them. Idles fine and runs fine. Setting on 22lbs of boost and 53% duty cycle. For $350 You can't beat them. Casper Electronics makes the adapter for the Denso to Ev6. __________________ MODS 6.0 forged iron block, TH400, B&M shifter, DSS axles & driveshaft, Viking / BMR suspension, Full custom fuel system with cell, Twin 76mm teriyaki tornados on 24lbs. https://www.instagram.com/whoopa_ss/

04-11-2018, 07:04 PM	#4
ttshovel Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013 Location: findlay,oh Posts: 2,069	same, I'm using them but have yet to start it. __________________ 12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel

04-12-2018, 05:10 PM	#5
fif_gen_powa Drives: 2013 Camaro SS Turbo Join Date: Apr 2014 Location: South Florida Posts: 1,525	The sloppy mechanics guys use those made 1000+ on e85 That's what I'll use if/when I max out my 1000s __________________ 388ci 91/104 Turbo TH400 8.3@164 https://instagram.com/turbo_ls3/

04-11-2018, 08:02 AM	#2
CGbambam Drives: 2011 Camaro 2SS Join Date: Sep 2015 Location: Houston Posts: 410	They run fine, been running them over a year no problem. They just don't come with injector data which some tuners hate, and you need a little adapter pigtail since they aren't ev6. I even flowtested them prior to installation and they all checked out fine