Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Wheels and Tires Talk Sponsored by The Tire Rack


Reply
 
Thread Tools
Old 02-10-2018, 10:35 PM   #1
Nighthawk89


 
Nighthawk89's Avatar
 
Drives: 2011 Camaro 2Ss M6
Join Date: Dec 2011
Location: Southern California
Posts: 3,491
18" Rear Weld Recommendations

I am interested in running a weld on just the rear in either the RTS S71 or S77. My question is. Can I run a 18X11? Im not seeing the offsets and I believe I need a +43 in the rear?

Can anyone shed some info on this for me. I am also lowered in the rear 1".
__________________
PerformanceHeartbeat Supercharger -BTR Stage 3 PD Cam -BTR Supporting Mods -CHE Rocker Arms -Roto-Fab Cold Air -VMaxx TB -Elite E2 Catch Can -NGK Trix7's -Squash Fuel System -FIC 1000 Injectors - JDP Clutch Res Relocation -Kooks LT's/Cat-less -Corsa 3" ZL1 Black Tip Exhaust-
Suspension1.25'' Front & 1" Rear Drop- BMR (Sway's, Toe Links, Trailing Arms, Front End Links, Upper Control Arm Bushings, Outer Trailing Arm Bushings)-FMT Solid Subframe Bushings
Brake's/WheelsPowder-coated Calipers-Goodridge Lines-Slotted and Dimpled Rotors-Hawk HPS Pads-OEM ZL1 10 Spoke Wheels (285 Front/315 Rear)
Nighthawk89 is offline   Reply With Quote
Old 02-10-2018, 10:55 PM   #2
mlee
www.CamaroFest.org
 
mlee's Avatar
 
Drives: 2019 Crush ZLE - on order
Join Date: Oct 2008
Location: Conroe, TX
Posts: 32,543
I had 10.5 and they worked perfect...

http://www.camaro5.com/forums/showpo...postcount=1096
__________________
.
mlee is offline   Reply With Quote
Old 02-11-2018, 10:15 AM   #3
blake-b


 
blake-b's Avatar
 
Drives: Black 2010
Join Date: May 2010
Location: KCMO
Posts: 2,912
I have 18x11 S71s on the rear. No issues at all. Im lowered more than 1" also.

My part number is W71HB8110N76A-18X11 WELD RACING RT-S BLACK HIGH PAD 7.6"BS
Rear backspace is 41mm. These are 4.75 bolt circle. They now offer 5x120mm pattern which they didnt when i ordered. You can configure on their site.

Part number for black with 5x120 pattern: 71HB8110N76A (same as 4.75 according to wheel configurator)

Polished: 71HP8110N76A
blake-b is offline   Reply With Quote
Old 02-11-2018, 10:55 AM   #4
Nighthawk89


 
Nighthawk89's Avatar
 
Drives: 2011 Camaro 2Ss M6
Join Date: Dec 2011
Location: Southern California
Posts: 3,491
Quote:
Originally Posted by mlee View Post
I had 10.5 and they worked perfect...

http://www.camaro5.com/forums/showpo...postcount=1096
I saw your post on a different thread, Just trying to see if the 11 is an option. Love your wheels tho brotha!
__________________
PerformanceHeartbeat Supercharger -BTR Stage 3 PD Cam -BTR Supporting Mods -CHE Rocker Arms -Roto-Fab Cold Air -VMaxx TB -Elite E2 Catch Can -NGK Trix7's -Squash Fuel System -FIC 1000 Injectors - JDP Clutch Res Relocation -Kooks LT's/Cat-less -Corsa 3" ZL1 Black Tip Exhaust-
Suspension1.25'' Front & 1" Rear Drop- BMR (Sway's, Toe Links, Trailing Arms, Front End Links, Upper Control Arm Bushings, Outer Trailing Arm Bushings)-FMT Solid Subframe Bushings
Brake's/WheelsPowder-coated Calipers-Goodridge Lines-Slotted and Dimpled Rotors-Hawk HPS Pads-OEM ZL1 10 Spoke Wheels (285 Front/315 Rear)
Nighthawk89 is offline   Reply With Quote
Old 02-11-2018, 10:56 AM   #5
Nighthawk89


 
Nighthawk89's Avatar
 
Drives: 2011 Camaro 2Ss M6
Join Date: Dec 2011
Location: Southern California
Posts: 3,491
Quote:
Originally Posted by blake-b View Post
I have 18x11 S71s on the rear. No issues at all. Im lowered more than 1" also.

My part number is W71HB8110N76A-18X11 WELD RACING RT-S BLACK HIGH PAD 7.6"BS
Rear backspace is 41mm. These are 4.75 bolt circle. They now offer 5x120mm pattern which they didnt when i ordered. You can configure on their site.

Part number for black with 5x120 pattern: 71HB8110N76A (same as 4.75 according to wheel configurator)

Polished: 71HP8110N76A
Awesome response! I appreciate all of the info. Do you mind me asking if you had to modify your suspension at all (Besides the ride height adjustment you made). Also, What tire are you running?
__________________
PerformanceHeartbeat Supercharger -BTR Stage 3 PD Cam -BTR Supporting Mods -CHE Rocker Arms -Roto-Fab Cold Air -VMaxx TB -Elite E2 Catch Can -NGK Trix7's -Squash Fuel System -FIC 1000 Injectors - JDP Clutch Res Relocation -Kooks LT's/Cat-less -Corsa 3" ZL1 Black Tip Exhaust-
Suspension1.25'' Front & 1" Rear Drop- BMR (Sway's, Toe Links, Trailing Arms, Front End Links, Upper Control Arm Bushings, Outer Trailing Arm Bushings)-FMT Solid Subframe Bushings
Brake's/WheelsPowder-coated Calipers-Goodridge Lines-Slotted and Dimpled Rotors-Hawk HPS Pads-OEM ZL1 10 Spoke Wheels (285 Front/315 Rear)
Nighthawk89 is offline   Reply With Quote
Old 02-11-2018, 11:10 AM   #6
blake-b


 
blake-b's Avatar
 
Drives: Black 2010
Join Date: May 2010
Location: KCMO
Posts: 2,912
Quote:
Originally Posted by Nighthawk89 View Post
Awesome response! I appreciate all of the info. Do you mind me asking if you had to modify your suspension at all (Besides the ride height adjustment you made). Also, What tire are you running?
I did nothing specific to the suspension. Its all BMR/BC/Pedders except the LCA which are FE4 (ZL1).

Running MT Street SS 305/40/18. They are way stickier than the NT05Rs in 315 i had before.
blake-b is offline   Reply With Quote
Old 02-11-2018, 03:08 PM   #7
Nighthawk89


 
Nighthawk89's Avatar
 
Drives: 2011 Camaro 2Ss M6
Join Date: Dec 2011
Location: Southern California
Posts: 3,491
Quote:
Originally Posted by blake-b View Post
I did nothing specific to the suspension. Its all BMR/BC/Pedders except the LCA which are FE4 (ZL1).

Running MT Street SS 305/40/18. They are way stickier than the NT05Rs in 315 i had before.
Awesome. I am going to be ordering those wheels and tires. Im hoping i notice a big difference in the hook over these R888R's I am currently running.. They are a 315/30/20 and the sidewall is just killing my hooking ability i believe.
__________________
PerformanceHeartbeat Supercharger -BTR Stage 3 PD Cam -BTR Supporting Mods -CHE Rocker Arms -Roto-Fab Cold Air -VMaxx TB -Elite E2 Catch Can -NGK Trix7's -Squash Fuel System -FIC 1000 Injectors - JDP Clutch Res Relocation -Kooks LT's/Cat-less -Corsa 3" ZL1 Black Tip Exhaust-
Suspension1.25'' Front & 1" Rear Drop- BMR (Sway's, Toe Links, Trailing Arms, Front End Links, Upper Control Arm Bushings, Outer Trailing Arm Bushings)-FMT Solid Subframe Bushings
Brake's/WheelsPowder-coated Calipers-Goodridge Lines-Slotted and Dimpled Rotors-Hawk HPS Pads-OEM ZL1 10 Spoke Wheels (285 Front/315 Rear)
Nighthawk89 is offline   Reply With Quote
Old 02-12-2018, 11:05 AM   #8
Jeff_SS
"Cam Only"
 
Jeff_SS's Avatar
 
Drives: 2013 Camaro SS
Join Date: Nov 2011
Location: Thousand Oaks, CA
Posts: 1,649
Quote:
Originally Posted by Nighthawk89 View Post
Awesome. I am going to be ordering those wheels and tires. Im hoping i notice a big difference in the hook over these R888R's I am currently running.. They are a 315/30/20 and the sidewall is just killing my hooking ability i believe.
It's more-so the compound, not the sidewall, Devin.
You'll notice a night and day difference between a Mickey and your 888.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake | Pfadt Suspension | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno)

Jeff_SS is offline   Reply With Quote
Old 02-12-2018, 04:13 PM   #9
atomicfusion
 
Drives: 07 Z06 11 L99 SS 16 c7 16 1SS
Join Date: May 2009
Location: Ohio
Posts: 265
Most people do a 17x10 and and a 305/45/17 drag radial, If you want to do an 18 you can do an 18x10.5 with a high pad and a 7.6 backspace

P.S. hit me up if you want a killer deal on welds
atomicfusion is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:24 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.