[Ricardo@Phastek]

Nitrous Outlet Nitrous System for 2016 Camaro SS!!

Add the extra power you are looking for with a simple push of a button!! With a shot size ranging from 50-200hp jetting, this will be sure to set you back in the seat even more the Camaro already does.

This system is designed specifically for the LT1 V8 2016+ Camaro SS using the stock intake manifold. A custom solenoid bracket and prefabricated hard-lines bolt directly between the throttle body and intake manifold.

Features:

• Number of Stages: Single Stage
• Dry/Wet: Wet Kit
• Number of Solenoids: 2
• Included Jetting (in Horsepower): 50-100-150-200
• Type Of Fuel Rail: Stock Fuel Rails
• Hard or Soft Line (From Solenoids): Hard Line

FREE SHIPPING @ Phastek Performance

Nitrous Outlet LT1 Nitrous System - CLICK HERE

[Ricardo@Phastek]

[Ricardo@Phastek]

Go with a trusted name in the industry.

Dont take our word for it. Listen to our customers!!

[STRUGLE]

What would be the total price installed at your shop?

[Ian SS]

What modifications are necessary to run this kit with the MSD manifold?

[Ricardo@Phastek]

Originally Posted by IFIWAS

What would be the total price installed at your shop?

Unfortunately we no longer take on installations. I can suggest a shop in our area that can get you taken care of.

Originally Posted by slo_1ss

What modifications are necessary to run this kit with the MSD manifold?

Not much, if any. Since this is a plate kit it will mount off the front side of the intake and have the TB bolted back on. The plumbing and wiring should be the hardest part to make for a clean install.

[Ricardo@Phastek]

Custom MSD Atomic intake from Nitrous Outlet!!

[Ricardo@Phastek]

[Ricardo@Phastek]

Thank you Camaro6

[Ricardo@Phastek]

[ender2664]

What can the stock motor take without tuning or any supporting mods? Just bolting up the system and some safety accessories.

[Ricardo@Phastek]

Originally Posted by ender2664

What can the stock motor take without tuning or any supporting mods? Just bolting up the system and some safety accessories.

Safely, no more then a 50 shot with out a tune or supporting mods. That would be the most I would go.

Now if you got a tune or supporting mods then you can turn it up.

[ender2664]

Originally Posted by Ricardo@Phastek

Safely, no more then a 50 shot with out a tune or supporting mods. That would be the most I would go.

Now if you got a tune or supporting mods then you can turn it up.

For some reason I have a mental block with turning:/
Do you have a list of installers and or tunners?
I also need to figure out this whole living in a hot environment and using nitrous.
But I really want to!

[Ricardo@Phastek]

Originally Posted by ender2664

For some reason I have a mental block with turning:/
Do you have a list of installers and or tunners?
I also need to figure out this whole living in a hot environment and using nitrous.
But I really want to!

Dont know any installers in your area. Tuning can be a bit of a pain to learn but once you have it down fairly easy to stay updated.