Ball hone & ring gap for nitrous - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

GMCHRIS98 · 12-30-2021, 04:29 PM

Used a 240 grit ball hone (flex hone) hit each cylinders for 35 secs and this is how they turned out does that look fine

? Its for my ls3

Also want to run a 200 shot of nitrous every here and there but car is my daily soo I emailed summit about my gap on my pistons rings and they said “ they would consider .024-.026 on the top ring and about .023" for the second ring”

Also when gapping piston rings for nitrous do they need to be cut a certain way or do they always need to be gapped squared and both ends need to be paralleled

thereason · 03-02-2022, 12:01 AM

What size flex hone did you use, if you don’t mind me asking?

12-30-2021, 04:29 PM	#1
GMCHRIS98 Drives: Chevrolet Camaro Join Date: Nov 2021 Location: Los Angeles Posts: 10 View My Garage	Ball hone & ring gap for nitrous Used a 240 grit ball hone (flex hone) hit each cylinders for 35 secs and this is how they turned out does that look fine ? Its for my ls3 Also want to run a 200 shot of nitrous every here and there but car is my daily soo I emailed summit about my gap on my pistons rings and they said “ they would consider .024-.026 on the top ring and about .023" for the second ring” Also when gapping piston rings for nitrous do they need to be cut a certain way or do they always need to be gapped squared and both ends need to be paralleled Attached Images

03-02-2022, 12:01 AM	#2
thereason Drives: 2009 Cadillac CTS-V Join Date: Oct 2010 Location: New Orleans, LA Posts: 16	What size flex hone did you use, if you don’t mind me asking?