05-19-2018, 05:48 PM | #71 |
Drives: 2015 Camaro ZL1 M6 White Join Date: Dec 2014
Location: Beatrice, Ne
Posts: 126
|
Some shots on the completion of the aesthetic mods. Performance mods to start on monday.
__________________
|
05-24-2018, 09:30 AM | #72 |
Drives: 2015 Camaro ZL1 M6 White Join Date: Dec 2014
Location: Beatrice, Ne
Posts: 126
|
Got the RPM 5" CAI installed. NoWeeds Diverters are on, Kooks 2"X3" long tube headers Ceramic Coated in Chrome and the High Flow Race Cats are on (Enginer->Headers-> No Weeds Diverters-> High Flow Cats -> Stock Exhaust), new spark plugs are in. The Forced Induction Lid spacer and blower spacer are currently being installed.
__________________
|
05-24-2018, 08:20 PM | #73 |
Drives: 2015 Camaro ZL1 M6 White Join Date: Dec 2014
Location: Beatrice, Ne
Posts: 126
|
Some shots of some of the Force Inductions lid Spacer Install, No Weeds Diverters, and some Kooks High Flow Cats with one end reduced down to get into the stock exhausts.
__________________
|
05-25-2018, 09:59 AM | #74 |
Drives: 2015 Camaro ZL1 M6 White Join Date: Dec 2014
Location: Beatrice, Ne
Posts: 126
|
Really pushing the limits with the Forced Inductions Lid Spacer AND Supercharger Spacers. Needing to also slighting raise up the strut tower brace to make it fit.
__________________
|
05-25-2018, 07:14 PM | #75 |
Drives: 2015 Camaro ZL1 M6 White Join Date: Dec 2014
Location: Beatrice, Ne
Posts: 126
|
So we got the spacing situation figured out with the Forced Inductions Lid Spacer and Supercharger Blower Spacers. Everything runs. Check engine light thanks to the 5" CAI and 2"X 3" Kooks long tube headers and the noweeds diverters. Will be getting the car in next week to get tuned and dynoed.
All ready for the car show tomorrow.
__________________
|
05-30-2018, 06:27 PM | #76 |
Drives: 2015 Camaro ZL1 M6 White Join Date: Dec 2014
Location: Beatrice, Ne
Posts: 126
|
Some shots of the group that went to Cars and Coffee with the build and a shot of a ZR1 Sitting side by side with the ZL1.
And a link to the live feed video from the Cars and Coffee Car show. The group shows up from 2:40-4:10 and again at 4:45 you can hear the car at the other end of the car show https://www.facebook.com/speedwaymot...1MTM2MDI2OTM4/ And a link to the video of the NoWeeds diverters combined with the 2" X 3" Kooks headers. https://www.facebook.com/gpcustoms/v...6038500633301/ I should hopefully be able to bring him home this Saturday.
__________________
|
06-01-2018, 01:57 PM | #77 |
Drives: 2015 Camaro ZL1 M6 White Join Date: Dec 2014
Location: Beatrice, Ne
Posts: 126
|
Results are (RW) 505HP/468TQ on the mustang dyno which I think converts to roughly 567HP/525TQ on a dyno Jet
From what I've read, the M6 bone stock runs 430rwhp on the mustang dyno. I didn't do a baseline. Correct me if I'm wrong anywhere in this.
__________________
Last edited by GreatGiza; 06-01-2018 at 03:37 PM. |
06-01-2018, 03:06 PM | #78 |
Drives: 2017 Chevy Sonic RS 1.4T Join Date: Sep 2017
Location: Riverview, Florida
Posts: 327
|
__________________
2015 Camaro RS/SS SIM LS3- Sold
2017 Sonic Mosaic Black RS 1.4T |
|
|
Tags |
black, built, custom, white, zl1 |
|
|