02-08-2016, 11:57 AM | #1 |
BC 2010
Drives: 2010 Camaro SIM 2SS/RS M6 GFX SR Join Date: Aug 2009
Location: Santa Barbara, CA
Posts: 232
|
Z28 axles
Just seeing if anyone has tried using Z28 half shafts in the 2010 2011
SS camaro M6 ? GM performance says using these #s 23473010 and 23473011. |
02-09-2016, 03:07 PM | #2 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,720
|
I have to ask: what's different on the Z28 axles? Bigger CV joints I hope
__________________
|
02-11-2016, 12:10 PM | #3 |
BC 2010
Drives: 2010 Camaro SIM 2SS/RS M6 GFX SR Join Date: Aug 2009
Location: Santa Barbara, CA
Posts: 232
|
I think there's a little difference. I've gone through two Left axles and one right axle that blew out grease through the boots. Gm rep. took a look, there are sending new axle with a better boot ? the last one was 1Le axle all this happen in 2000 miles
|
12-03-2016, 08:41 PM | #4 |
Drives: 2015 CAMARO Join Date: Sep 2015
Location: Illinois
Posts: 168
|
Annnd? The differences, if any, are exactly what? Anyone know for sure?
|
|
|
|
|