03-27-2019, 06:07 PM | #1 |
Drives: 2015 ZL1 Bright Yellow Join Date: Apr 2014
Location: Mitchell, SD
Posts: 115
|
Help - My tuner is deployed
I have two tunes on my Microsoft Surface Pro. I need step by step instructions or walk me through it over the phone to switch from my current tune. I have HPtuners MPVI 2 that plugs into the OBDI and the laptop. Up to now, my tuner used TeamViewer to switch the tunes and make changes to the tunes.
|
03-27-2019, 10:20 PM | #2 |
Drives: 2023 SS 1LE 10SPD/2015 SS 427 Man Join Date: Aug 2015
Location: Sacramento Area
Posts: 803
|
PM Sent
__________________
|
03-28-2019, 08:09 AM | #3 |
Drives: 2012 2SS/RS, 1968 SS Join Date: Feb 2012
Location: Southeast, PA
Posts: 2,093
|
If you have 2 tunes on your laptop, and you know which is which.
You just plug into your car, turn the ignition to on (don't start the car), and open up VCM Editor, select the tune file, go up to Write > Write Calibration Only > Click Begin, and wait for it to write it over. When it's completely done (could take a couple of minutes, as I'm sure you know), then you hit close and disconnect HPT from your car. Turn the car completely off, and then start it.
__________________
LS3 Crate Engine Swap | CSP Custom Cam 232/240 .615/.615 113 +3 | Stainless Power LT Headers | Z28 Intake | Borla S-Type Exhaust | FTI Triple-Disc Billet 3200 Stall
2012 Camaro 2SS/RS | 1968 Camaro SS | 2020 Cadillac CT5 Premium Luxury | 2021 Spark LS |
03-28-2019, 12:05 PM | #4 | |
Drives: 2015 ZL1 Bright Yellow Join Date: Apr 2014
Location: Mitchell, SD
Posts: 115
|
Quote:
|
|
|
|
|
|