New Heat Exchanger for ZL1 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BeardWS6 · 03-02-2013, 07:33 PM

Nice little piece of art for the ZL1 to have. Here is the list of mods again..

1. Roto Fab Cold Air Kit
2. ZL1 Custom Heat Exchanger with dual fans
3. Metco Motorsports 9.1" lower pulley ( includes innovators west damper)
4. Metco Motorsports 2.5" blower pulley
5. Cam specs 227/242/520/590/122+6.
6. .675 lift double valve spring kit with Ti Retainers
7. Comp cam pushrods
8. 160 degree thermostat
9. solid isolater
10. Kooks 1 7/8" headers with Catted Connection pipe
11. Metco 50 MM Idler pulley
12. Blower belt
13. Ported mouth, ported blower, snout, throttle body
14. MSD wires and NGK TR7IX spark plugs
15. Alky Control Meth injection kit
16. ID 850 fuel Injectors
I feel some good power coming...Should have her back late this week!

drrm123 · 03-03-2013, 09:53 PM

What brand HX is that and are the hoses still in the stock location?

BeardWS6 · 03-04-2013, 07:11 AM

I`m going up to the shop today to look at it. G-Force ordered the Heat Exchanger, Talk to Robert and he can give you all the info on it. It`s new to the market is all I know..But it`s nice..

BeardWS6 · 03-04-2013, 01:14 PM

The factory heat exchanger was very small, looked like a trans cooler.. Car looks awesome and the methanol system looks good on her.. Numbers soon.

John Deere Racer · 03-04-2013, 01:42 PM

Quote:

Originally Posted by BeardWS6

The factory heat exchanger was very small, looked like a trans cooler.. Car looks awesome and the methanol system looks good on her.. Numbers soon.

Looks nice
I like the fans

Who made it ?

BeardWS6 · 03-04-2013, 03:09 PM

Quote:

Originally Posted by John Deere Racer

Looks nice
I like the fans

Who made it ?

PM sent

drrm123 · 03-04-2013, 03:32 PM

Who is g-force or where are they located? Looks like a TORQ heat exchanger, but theirs has the inlet and outlet hoses on the same side.

BeardWS6 · 03-04-2013, 03:54 PM

G-Force is in Pearland Texas. It`s a custom from a vendor who G-Force works with..

ZL1ster · 03-04-2013, 08:17 PM

Me like this new MoD you have

...another upgrade to add to the ever growing list :biggrin1:.

SC2150 · 03-05-2013, 10:11 AM

Nice setup, but your still dependant on ambient air temps and get into the 100's outside and you will still be app 20* above ambient at the IAT2 reading, and thats into timing pulling range even running easy.

I still like the power gains of IAT2's in the 60's and 70's when its 100* outside.

But this setup is definately a huge improvement over the stock HE and no resivoir.

03-02-2013, 07:33 PM	#1
BeardWS6 Drives: 01 WS6 Join Date: Jun 2009 Location: Texas Posts: 263	New Heat Exchanger for ZL1 Nice little piece of art for the ZL1 to have. Here is the list of mods again.. 1. Roto Fab Cold Air Kit 2. ZL1 Custom Heat Exchanger with dual fans 3. Metco Motorsports 9.1" lower pulley ( includes innovators west damper) 4. Metco Motorsports 2.5" blower pulley 5. Cam specs 227/242/520/590/122+6. 6. .675 lift double valve spring kit with Ti Retainers 7. Comp cam pushrods 8. 160 degree thermostat 9. solid isolater 10. Kooks 1 7/8" headers with Catted Connection pipe 11. Metco 50 MM Idler pulley 12. Blower belt 13. Ported mouth, ported blower, snout, throttle body 14. MSD wires and NGK TR7IX spark plugs 15. Alky Control Meth injection kit 16. ID 850 fuel Injectors I feel some good power coming...Should have her back late this week! Attached Images __________________ 2013 Red ZL1 Auto modded 2015 C7 ZO6 Luguna Blue stock Last edited by BeardWS6; 03-04-2013 at 03:58 PM.

03-04-2013, 07:11 AM	#3
BeardWS6 Drives: 01 WS6 Join Date: Jun 2009 Location: Texas Posts: 263	I`m going up to the shop today to look at it. G-Force ordered the Heat Exchanger, Talk to Robert and he can give you all the info on it. It`s new to the market is all I know..But it`s nice.. __________________ 2013 Red ZL1 Auto modded 2015 C7 ZO6 Luguna Blue stock

03-04-2013, 01:14 PM	#4
BeardWS6 Drives: 01 WS6 Join Date: Jun 2009 Location: Texas Posts: 263	The factory heat exchanger was very small, looked like a trans cooler.. Car looks awesome and the methanol system looks good on her.. Numbers soon. __________________ 2013 Red ZL1 Auto modded 2015 C7 ZO6 Luguna Blue stock

03-04-2013, 03:54 PM	#8
BeardWS6 Drives: 01 WS6 Join Date: Jun 2009 Location: Texas Posts: 263	G-Force is in Pearland Texas. It`s a custom from a vendor who G-Force works with.. __________________ 2013 Red ZL1 Auto modded 2015 C7 ZO6 Luguna Blue stock

03-03-2013, 09:53 PM	#2
drrm123 Drives: 2013 ZL1 Camaro A6 Join Date: Nov 2012 Location: California Posts: 63	What brand HX is that and are the hoses still in the stock location?

03-04-2013, 03:32 PM	#7
drrm123 Drives: 2013 ZL1 Camaro A6 Join Date: Nov 2012 Location: California Posts: 63	Who is g-force or where are they located? Looks like a TORQ heat exchanger, but theirs has the inlet and outlet hoses on the same side.

03-04-2013, 08:17 PM	#9
ZL1ster Drives: '13 ZL1 IOM M6 Join Date: Nov 2012 Location: South Carolina Swamps y'all Posts: 211 View My Garage	Me like this new MoD you have ...another upgrade to add to the ever growing list :biggrin1:.

03-05-2013, 10:11 AM	#10
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	Nice setup, but your still dependant on ambient air temps and get into the 100's outside and you will still be app 20* above ambient at the IAT2 reading, and thats into timing pulling range even running easy. I still like the power gains of IAT2's in the 60's and 70's when its 100* outside. But this setup is definately a huge improvement over the stock HE and no resivoir.