09-18-2017, 04:55 PM | #1 |
Drives: 2010 2SS Camaro Join Date: Apr 2017
Location: Mercedes
Posts: 24
|
Looking for a ZL1 Diffuser
I have been looking to get a rear diffuser for my 2010 camaro, I recently bought some quad tips to give my camaro a ZL1 look from the back, and I just went to the Chevrolet Dealership and they were selling the diffuser for $175.
By any chance does anyone know where I can get it for a cheaper cost? Part number #22894221 |
09-18-2017, 05:13 PM | #2 |
Drives: 1LE Join Date: May 2015
Location: California
Posts: 267
|
Look around the various online part dealers out there. A good start is putting the part number on google. Be sure to include your zip to figure out shipping for the total. Some shipping will be more/less than others.
GMpartsonline has it for 117, while GMpartscenter has it for 120, then they both have their own shipping/handling. Just gotta look around. |
09-18-2017, 06:36 PM | #3 |
Drives: 2011 Cyber Gray 2SS 6 speed Join Date: Jan 2012
Location: Chelmsford MA
Posts: 504
|
Be careful of after market diffusers. I saw several posts especially about shark diffusers wherein folks said they did not fit properly. May want to stay with GM unless you want to spend time trying to get an after market piece to fit.
|
09-18-2017, 06:54 PM | #4 |
Evil Genius of Chevrolet
Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017
Location: New York
Posts: 3,260
|
Hmmmm, mine went on easy and fits great.
__________________
GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.
|
09-18-2017, 07:40 PM | #5 |
Drives: 2011 RS Join Date: Apr 2011
Location: Florence New Jersey
Posts: 1,125
|
Get a 1LE diffuser because it doesn't have the sides. The ZL1 diffuser doesn't look right without ZL1 Rocker Panels.
|
09-19-2017, 02:32 PM | #6 |
Drives: 2011 Cyber Gray 2SS 6 speed Join Date: Jan 2012
Location: Chelmsford MA
Posts: 504
|
|
09-19-2017, 03:05 PM | #7 |
Drives: 2015 Black 2SS/RS Join Date: Mar 2016
Location: Culpeper, VA
Posts: 163
|
I went with the z/28 diffuser and god do I love it. Will go on later this week
[IMG][/IMG]
__________________
2015 2SS RS Roto-Fab Intake Borla Atak Cat back
Drive fast on empty roads with nothing in mind except falling in love and not getting arrested https://www.instagram.com/gen5dewy/ |
09-19-2017, 05:52 PM | #8 |
Drives: Ashen grey, 1SS, L99 Join Date: Aug 2016
Location: Oklahoma
Posts: 527
|
It came painted or had it painted?
__________________
Roto-fab CAI, Nick Williams 102mm TB, LOD X1 V3 intake manifold, GMPP LS3 heads, Night Fury cam, TSP 2 long tubes, Corsa ZL-1 catback, Nitrous Outlet 102mm plate kit/150 shot, NGK BR7EF plugs with Taylor plug wires, DSX flex fuel kit, ZL-1 fuel pump and injectors, B&M deep trans pan, Yank 3400 converter, 3.45s with BMR Delrin bushings, mishimoto 169° Thermostat, GM ground effects, T-Rex upper grill, Z/28 Spoiler, Lolly pop Lime brake calipers, ZL1 10 spoke wheels, 12 subwoofer, and custom paint matched interior.
|
09-19-2017, 06:41 PM | #9 |
Drives: 2012 Camaro 2ss Join Date: Aug 2017
Location: New Mexico
Posts: 94
|
|
09-19-2017, 08:25 PM | #10 |
Drives: 2010 2SS Camaro Join Date: Apr 2017
Location: Mercedes
Posts: 24
|
My Camaro With Ground Effects
I am Probably gonna get the Diffuser from the GM but not sure if i am going to need anything else like the heat guards. I will probably gonna have to invest in the Side rockers from the ZL1 since i have the grounds effects kit and might not look good mixed with the Zl1 Diffuser and the ground effects side rockers lol
|
09-19-2017, 09:43 PM | #11 |
Drives: Savitar; The 500rwhp N/A Monster! Join Date: Aug 2016
Location: Middletown, Ohio
Posts: 2,914
|
Ive got the same diffuser as Flying Banana and I agree, went on with no problems, however, didn't have the 4 screw holes underneath to line up with factory mounting points. A drill and a few well placed zip ties took care of that for added support. I have a 2010 SS by the way.
This is the diffuser in question: http://www.ebay.com/itm/10-13-Chevy-...-/201200743261
__________________
*SOLD*504HP/433TQ | Night Fury cammed Cold Air Inductions intake Bo White ported TB Speed Engineering 1 7/8 longtubes NPP catback QTP low profile cutouts Powerbond 25% UDP 3.73 gears JRE scoop ZL1 grille R1 Concepts drilled/slotted rotors built/tuned by Weapon X Motorsports
|
09-20-2017, 07:30 AM | #12 |
Drives: 2015 Black 2SS/RS Join Date: Mar 2016
Location: Culpeper, VA
Posts: 163
|
__________________
2015 2SS RS Roto-Fab Intake Borla Atak Cat back
Drive fast on empty roads with nothing in mind except falling in love and not getting arrested https://www.instagram.com/gen5dewy/ |
10-06-2017, 10:12 PM | #13 |
|
The z/28 diffuser is $900? Yikes! I have 1LE/NPP now biut need one with quad tips
Sent from my iPhone using Tapatalk
__________________
Cold Air Inductions CAI Stainless Power LT's with HFC's Flowmaster American Thunder Cat Back APEX Scoop and WW Relocation Kit VMAX Ported Throttle Body Custom Dyno Tune Pfadt 1.25" Lowering Springs ZL1 Rims on 275 front 315 Rear custome underlay vinyl wrap Anvil Spoiler heritage grill APR Front Splitter Custom Emblempros emblems ZL1 Side Skirts 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)
|
10-07-2017, 09:38 AM | #14 |
Drives: early 2011 Camaro convertible Join Date: Jul 2014
Location: House Springs, Mo
Posts: 2,002
|
watch out, shipping can be rather costly since box is considered oversize. I was able to purchase my ZL1 diffuser with free freight special offer
__________________
Early 2011 LT Convertible, ZL1 bumper, hood, side skirts, belly pan and wheels, Truecarbon ECF hood extractor, K&N CAI, Elite catch can, Big Worm Bow Tie emblems, Jacfab bracket, Vitesse TC, BMR strut brace, BMR tunnel brace, NPP exhaust |
|
|
Thread Tools | |
|
|