10-26-2015, 10:11 AM | #1 | |
"Cam Only"
|
My Cam Only Camaro SS vs a Cam Only 1/LE
This is from the Shift S3ctor half mile event this last weekend (24th & 25th)
My car has a CMS custom grind cam, Kooks long tubes, a CAI intake, and GM 3.91 gears, Mickey Thompson 305/35/20 drag radials. My car makes 483rwhp on a single roller loaded mustang dyno 1/LE has a cam, headers, intake, Nitto drag radials (and factory 3.91's). His car makes 465rwhp This was off a tree, from a dig, for a flat out 1/2 mile (exactly 2,640 feet) Not sure if he's on this forum, I would assume he is since he had 1/LE badges and stuff on his car, and it seemed to be tastefully modded like some of those in the 1/LE section of this forum. I pulled ahead of him in 1st gear, chirped into 2nd, and continued to grow my lead the whole time. Good video regardless; both our cars sound great screaming down the runway at WOT. Shoutout to Cunningham Motorsports, only shop I'd ever trust to touch my car, drove to and from the airstrip (412 mile round trip), ran flawlessly. Anyone in California should go to their shop for their build/tune.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
|
10-26-2015, 10:34 AM | #2 |
Drives: 2015 Camaro SS 1LE, 2001 Camaro SS Join Date: Jun 2015
Location: Miami
Posts: 836
|
Nice video. Turned out about as expected. Your car benefits more from the 3.91s with the different gearing that the TR6060 has in the SS and you had slightly more power.
__________________
2017 GMC Canyon All Terrain- daily driver/dirt bike hauler
2015 Camaro SS 1LE- sold 2001 Camaro SS SOM M6- sold 1999 Firebird Formula A4- sold |
10-26-2015, 11:28 AM | #3 |
Drives: 2010 camaro ss Join Date: Jun 2010
Location: Port Arthur, Tx
Posts: 2,383
|
Did he have trouble launching? I race my buddy's 1le all the time and we are usually neck and neck. Whoever gets the jump wins. Nice race though.
|
10-26-2015, 04:33 PM | #4 |
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
nice run, yeah an SS with 3.91s will outperform a 1LE with the same mods
__________________
|
10-26-2015, 09:37 PM | #5 |
Account Suspended
Drives: 2011 2SS/ RS INFERNO ORANGE L99 Join Date: Dec 2012
Location: Alliston Ontario Canada
Posts: 9,057
|
That's wasn't even close
|
10-27-2015, 01:36 AM | #6 |
"Cam Only"
|
Thanks guys. I'm pretty good at launching on the mickey thompsons (had 20psi in them this pass) from a dig on the "street" (which essentially is what this airstrip is) but it wouldn't have really made that much difference anyways, my car pulls hard up top and continued to grow the lead each shift.
Owner was really cool though, nice guy. I think next event in April, we'll both be back with more power.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
10-31-2015, 11:59 PM | #7 |
Drives: camaro Join Date: Oct 2015
Location: CA
Posts: 2
|
yeah an SS with 3.91s will outperform a 1LE with the same mods
|
11-10-2015, 07:28 PM | #8 |
just curious, what was your clocked speed?
__________________
Robert
12.012 @ 115.75mph DA: 2371 | 486rwhp/467rwtq (11/8/2015)M 11.265 @ 123.55mph DA: 2318 | 526rwhp/532rwtq (11/19/2016)M 10.722 @ 132.21mph DA: 850 | 645rwhp/581rwtq (12/3/2017)M 10.609 @ 130.19 DA: 975 | 675rwhp/629rwtq (2/16/2020)D Build: E-Force w/ 3.25" pulley (11lbs of boost), 10% OD under pulley, Fore Dual Fuel System, ID850's, AEM CAI, Borla Long Tubes, Flowmaster Super 10's, Circle D 3200 converter 258mm triple disc lockup, cam 226/242 116+4 LSA, ZL-1 Rear end, E85 & BRC Raceworks Tune (previously known as CMS) Youtube Channel: http://www.youtube.com/c/RobertMitchellRCM |
|
11-15-2015, 01:20 PM | #9 |
"Cam Only"
|
Highest trap was 148mph.
Standing half mile.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
11-15-2015, 06:22 PM | #10 |
Drives: 2011 ss 2ss auto camaro Join Date: Mar 2015
Location: mary esther florida
Posts: 385
|
great job thats moving in a camaro...
|
|
|
Tags |
cam only, cms, dig, gapped, half mile |
|
|