Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Roto-Fab
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Members Classifieds - Parts for sale or wanted > Wheels / Tires


Reply
 
Thread Tools
Old 06-09-2018, 05:02 PM   #1
pbclax1
 
Drives: Car
Join Date: Sep 2014
Location: Florida
Posts: 111
MRR228 wheels/tires/tpms/lugs

I have a set of gunmetal MRR228 wheels. They are staggered with the fronts being 20x10 +35 offset and the rears being 20x11 +43 offset. They are mounted on 275/35zr20 and 315/35zr20 Nitto motivos that have TONS of life left in them(60k mile warranty from Nitto). Rims are pristine with NO curb rash or damage. Everything is mounted/balanced with TPMS. Will also come with locking lug nuts as the OEM lug nuts do not fit these wheels. This is the full package ready to just mount on your car. Message me and I can send you pics. $1900 obo + shipping

Last edited by pbclax1; 08-01-2018 at 08:42 PM.
pbclax1 is offline   Reply With Quote
Old 06-14-2018, 04:40 AM   #2
pbclax1
 
Drives: Car
Join Date: Sep 2014
Location: Florida
Posts: 111
Bump
pbclax1 is offline   Reply With Quote
Old 06-14-2018, 06:45 AM   #3
Mike Cordero
 
Drives: 1971 Camaro Z-28
Join Date: Sep 2015
Location: Puerto Rico
Posts: 319
wheels offset

what is the difference in the look, with a 20 x 10 front wheel with 35mm of offset and the same wheel with 23mm offset? Do one of them will look out of the fender border? Same tire on both offerset (275-35 or 40-20).
Mike Cordero is offline   Reply With Quote
Old 06-21-2018, 04:58 PM   #4
steakmaker
 
steakmaker's Avatar
 
Drives: '10 Camaro SS,Jeep Commander Hemi
Join Date: Mar 2010
Location: Cicero,NY
Posts: 567
Quote:
Originally Posted by Mike Cordero View Post
what is the difference in the look, with a 20 x 10 front wheel with 35mm of offset and the same wheel with 23mm offset? Do one of them will look out of the fender border? Same tire on both offerset (275-35 or 40-20).
The 23mm will be more dished. The more + offset you have on a wheel the closer the rim will be to the suspension ,you can use a spacer to bring the wheel back out ,but you have to make sure there's fender room.
steakmaker is offline   Reply With Quote
Old 06-22-2018, 10:19 AM   #5
Mike Cordero
 
Drives: 1971 Camaro Z-28
Join Date: Sep 2015
Location: Puerto Rico
Posts: 319
Quote:
Originally Posted by steakmaker View Post
The 23mm will be more dished. The more + offset you have on a wheel the closer the rim will be to the suspension ,you can use a spacer to bring the wheel back out ,but you have to make sure there's fender room.
So with 23's, will look more concave/deep?
Mike Cordero is offline   Reply With Quote
Old 06-22-2018, 01:01 PM   #6
S!N!ST3R
 
S!N!ST3R's Avatar
 
Drives: 2011 2SS/RS
Join Date: Apr 2015
Location: GA: The Peach
Posts: 52
yes Mike, with a +23 offset the rim will be more "concave" but with a 10" front and +23 offset you'd be poking out on most wheel/tire combos.

https://www.1010tires.com/Tools/Whee...et-Calculator# <-- can be your best friend when trying to see how much offset and sizes differ.
__________________
Mods: Borla S-Type Cat-back, CAI intake, ACS T3 splitter w/ Rad support, Havoc Rear Diffuser, the rest is a secret
S!N!ST3R is offline   Reply With Quote
Old 06-22-2018, 01:59 PM   #7
Mike Cordero
 
Drives: 1971 Camaro Z-28
Join Date: Sep 2015
Location: Puerto Rico
Posts: 319
Quote:
Originally Posted by S!N!ST3R View Post
yes Mike, with a +23 offset the rim will be more "concave" but with a 10" front and +23 offset you'd be poking out on most wheel/tire combos.

https://www.1010tires.com/Tools/Whee...et-Calculator# <-- can be your best friend when trying to see how much offset and sizes differ.
Because I don't want to look out of the fender border is why I would consider a 9" wide instead of the 10", so what would be your suggestion for the front, wide and offset. also for the rear? Thanks for your time. Again, I don't want that look out from the fender of rear panel border.
Mike Cordero is offline   Reply With Quote
Old 06-22-2018, 09:53 PM   #8
pbclax1
 
Drives: Car
Join Date: Sep 2014
Location: Florida
Posts: 111
Quote:
Originally Posted by Mike Cordero View Post
Because I don't want to look out of the fender border is why I would consider a 9" wide instead of the 10", so what would be your suggestion for the front, wide and offset. also for the rear? Thanks for your time. Again, I don't want that look out from the fender of rear panel border.
Like I had said, with the width and the offset of the wheels in this thread they did not go out of the fender “border” as you’re calling it. Front or rear...
pbclax1 is offline   Reply With Quote
Old 08-01-2018, 08:42 PM   #9
pbclax1
 
Drives: Car
Join Date: Sep 2014
Location: Florida
Posts: 111
Make an offer! Need to go!
pbclax1 is offline   Reply With Quote
Old 08-12-2018, 04:46 PM   #10
pbclax1
 
Drives: Car
Join Date: Sep 2014
Location: Florida
Posts: 111
Make an offer
pbclax1 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:01 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.