vengeance cams - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

busag78 · 03-09-2015, 08:42 PM

I'm wanting to cam my l99.. and been looking at vengeance racing vrsp 2 or 3 cam.. is there anyone on here running one of these cams in their l99? If so how do you like it?

mdub76 · 03-10-2015, 05:54 AM

I'm running their kaotic cam. But I'm a manual ls3

jbrown13 · 03-10-2015, 04:45 PM

I ran their VRSP-3 cam in my car for about 5,000 miles. That cam requires an LS3 conversion and I don't think it will work with VVT. Ran fine and looked good after removal. Removed the cam for a bigger VVT cam in my quest to run 10s at full weight and stock bottom end (failed so far by the way). Cam is available if you're interested.

03-09-2015, 08:42 PM	#1
busag78 Drives: 2011 camaro ss Join Date: Nov 2014 Location: indy Posts: 4	vengeance cams I'm wanting to cam my l99.. and been looking at vengeance racing vrsp 2 or 3 cam.. is there anyone on here running one of these cams in their l99? If so how do you like it?

03-10-2015, 05:54 AM	#2
mdub76 Drives: 2010 2ss/RS IOM GFX M6 Join Date: Jul 2011 Location: virginia Posts: 150 View My Garage	I'm running their kaotic cam. But I'm a manual ls3

03-10-2015, 04:45 PM	#3
jbrown13 Drives: 2011 Camaro SS L99 Join Date: Jan 2012 Location: Perry, GA Posts: 553	I ran their VRSP-3 cam in my car for about 5,000 miles. That cam requires an LS3 conversion and I don't think it will work with VVT. Ran fine and looked good after removal. Removed the cam for a bigger VVT cam in my quest to run 10s at full weight and stock bottom end (failed so far by the way). Cam is available if you're interested.