02-06-2019, 05:32 PM | #1 |
Just another car Jones!
|
SMOGGING PROBLEM NEW ZL11LE
Help!! I have a brand new 2018 zl1 and purchased in Ariz , shipped here, drove 550 miles and tried to day to get smogged and not able. both people plugged in their reader and both showed O2 sensor not ok. I doubt and so does everyone else, sensor Is bad. I was sent the 8 steps to drive cycle the car, which seems more hokus pokus. I have had many new cars, one Porsche had same issues and Porsche reset something so it worked. I cannot get any other help and extremely frustrated. Plus, the drive cycle suggested is not going to work here in Hermosa beach. No where can you drive for 5 minutes consistent at 55mph. Along with the other steps it is a crap shoot if those can be accomplished. Other than moving out of town, there must be some way .
Help is appreciated. fredz |
02-06-2019, 06:16 PM | #2 |
Drives: 2011 2SS Join Date: Mar 2015
Location: Arlington, Texas
Posts: 1,333
|
The car has no modifications at all? If not, I would think the only possibility is that a sensor is bad as you should have no problem smogging a new stock car
__________________
2011 SS L99
LSA Supercharger, BTR Stage 3 PDS Cam, Yank 3200SS, Weapon X Stage 2 intake, LSA Heads, Flex Fuel, Ported throttle body, Speed Engineering Headers, NOWEEDS, ZL1 fuel pump, DSX AUX Pump, ID-1050X injectors, 3” pipe to NPP mufflers, 3.91 gears |
02-06-2019, 06:17 PM | #3 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
Try the 405 at 3AM.
|
02-06-2019, 07:56 PM | #4 |
Just another car Jones!
|
yeah, right!
|
02-06-2019, 08:52 PM | #5 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
In all seriousness, it's new, take it to a dealership. Assuming it is stock, of course.
|
02-06-2019, 09:44 PM | #6 |
LSx FTW!!!
Drives: 2010 Camaro 2SS RS Join Date: Jan 2017
Location: TN
Posts: 767
|
It's covered under warranty, so take it back to the dealership.
Otherwise, replace the bad O2 sensor and then reset the PCM with a OBD 2 scanner.
__________________
2010 2SS RS A6 781rwhp on E85
Stage 2 ProCharger D1X Circle D 3400 Triple Disc Kooks Jet Hot Headers Kooks Full 3in exhaust Trick Flow GenX 255's Polished PAC .660's & Ti-retainers TSP VVT 3.2 cam kit w/DoD Delete Smith Bro's Trunnion kit AEM X-Series OBDII Widebands FIC ID1300x Injectors GM ZL1 High Output Fuel Pump DSX Tuning Flex Sensor DSX Auxiliary Fuel System Tim King Stage 4 Max Effort CTSV 6L90 DSS 1 piece aluminum driveshaft JRE 6L80E / 6L90E Dipstick NGK Iridium IX spark plugs #7 heat range Mighty Mouse Camaro 5 Wild w/-12an and Billet Black HP Tuners VCM Suite |
02-07-2019, 08:10 AM | #7 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
Did you buy the car with out checking if it conforms with CA emissions? if you did not buy a CA car that my be your problum.
|
02-07-2019, 01:37 PM | #8 |
Just another car Jones!
|
just FYI for anyone interested in how this is going and how it is going to end up. I have done everything feasible to get this resolved. Note to all: The car and the o2 sensor IS COVERED by waranty. But the process of making it work and pass is NOT. Since indicators show it is working it is not going to be handled by any dealer, period! I have one calling GM to see if there is anything THEY can provide to help. Other than that, i have to have my wrencher to the drive cycle. Silly but true. I hope this helps someone out there. All I can provide is what continues to come back as answers to the problem.
If Ca bought, no problem if from dealer...only because it was Ca purchased. Being from Ariz to CA caused the need to smog. THAT is the problem because NOW it is on the owner. Ca has a new or somewhat new requirement to pass and it is the bane of everyone. Good news..........I am having Flowmaster axleback exhaust with Scavenger and x pipe installed once I pass. and the car is definitly a challenge to stay off the go pedal. Thank you all for the assistance and suggestions and help. This is truly a great place for help. fred z |
02-07-2019, 03:24 PM | #9 |
LSx FTW!!!
Drives: 2010 Camaro 2SS RS Join Date: Jan 2017
Location: TN
Posts: 767
|
If you recently replaced it, just keep driving it until it eliminates the permanent code and you'll be fine.
__________________
2010 2SS RS A6 781rwhp on E85
Stage 2 ProCharger D1X Circle D 3400 Triple Disc Kooks Jet Hot Headers Kooks Full 3in exhaust Trick Flow GenX 255's Polished PAC .660's & Ti-retainers TSP VVT 3.2 cam kit w/DoD Delete Smith Bro's Trunnion kit AEM X-Series OBDII Widebands FIC ID1300x Injectors GM ZL1 High Output Fuel Pump DSX Tuning Flex Sensor DSX Auxiliary Fuel System Tim King Stage 4 Max Effort CTSV 6L90 DSS 1 piece aluminum driveshaft JRE 6L80E / 6L90E Dipstick NGK Iridium IX spark plugs #7 heat range Mighty Mouse Camaro 5 Wild w/-12an and Billet Black HP Tuners VCM Suite |
02-07-2019, 03:31 PM | #10 |
Just another car Jones!
|
not replaced as doesn't seem to need to be. I will solve this one way or another, but to be fair, yet logical.........I appreciate Ca trying to keep the rules tight, but not so tight that new cars from anywhere have to be tested...especially when it says...50 state emission acceptable.
|
03-18-2019, 12:30 PM | #11 |
So Cal Race Team
Drives: 2013 Camaro Join Date: Mar 2010
Location: Sunny So Cal
Posts: 3,584
|
I had the same issue with a Corvette that would show not ready for Smog, and I had to cycle it through their steps, which didn't seem to work. After an event driving back from Vegas, when got back, it suddenly showed clear, I was driving with a OBDII reader connected to an App. It will clear, just never as fast as we want.
__________________
|
03-19-2019, 05:18 PM | #12 |
Drives: 2010 Camaro SS Join Date: Jan 2015
Location: Valencia
Posts: 1,305
|
In order for the Readiness code to read "OK" assuming the O2 sensor is good you must complete a drive cycle normally about 50 miles or so. Once complete the readiness will reset and you should be good.
If that dose not work PM me. |
Thread Tools | |
|
|