Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
TireRack
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis


Reply
 
Thread Tools
Old 05-05-2016, 12:53 PM   #1
JakeW1990
 
JakeW1990's Avatar
 
Drives: 2010 Camaro RS/2SS
Join Date: Sep 2015
Location: Huntsville, AL
Posts: 314
Oil Pan VS Crossmember

Once upon a time I had a link for a kit that replaces a section of the crossmember with a bolt-on section so the oil pan can be removed at-will. I looked around on google and briefly on the site with no results.

Does anyone have a link to someone that sells a lot that I'm referencing? It will require the cutting o the crossmember and welding on the new brackets that will hold the new chassis component via bolts. Thinking about going this route.
__________________
2010 Camaro 2SS/RS M6
12.08 @ 115 - 9/2015 (392hp/393tq) NA w/ Exhaust + Tune
11/2015 (464hp/439tq) ^ + BTR Stage 4 w/ Halltech CAI


Engine: BTR Stage 4 Cam; BTR Dual Spring Kit; C7R Chain; LS2 Tensioner; High Volume Oil Pump
Drivetrain: ACT T2S-G05 x2 Disc XT Street Kit
Exhaust: Kook's 1 7/8" Headers w/ Off-road pipes;Kook's 3" cat-back; QTP 3" cut-outs
Suspension: BMR 1.4" Front & 1.5" Rear Springs; Blackdog Solid Mounts w/ Poly Bushings
JakeW1990 is offline   Reply With Quote
Old 05-05-2016, 01:23 PM   #2
hammdo
'It's an experiment'
 
hammdo's Avatar
 
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE
Join Date: May 2014
Location: Dallas TX
Posts: 6,767
Quote:
Originally Posted by JakeW1990 View Post
Once upon a time I had a link for a kit that replaces a section of the crossmember with a bolt-on section so the oil pan can be removed at-will. I looked around on google and briefly on the site with no results.

Does anyone have a link to someone that sells a lot that I'm referencing? It will require the cutting o the crossmember and welding on the new brackets that will hold the new chassis component via bolts. Thinking about going this route.
PM CFD, he makes them...

-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." -Enzo Ferrari
See My Build: http://www.camaro5.com/forums/showthread.php?t=385577
hammdo is offline   Reply With Quote
Old 05-06-2016, 07:57 AM   #3
JakeW1990
 
JakeW1990's Avatar
 
Drives: 2010 Camaro RS/2SS
Join Date: Sep 2015
Location: Huntsville, AL
Posts: 314
Quote:
Originally Posted by hammdo View Post
PM CFD, he makes them...

-Don
Thank you very much, Don. Purchasing today!
__________________
2010 Camaro 2SS/RS M6
12.08 @ 115 - 9/2015 (392hp/393tq) NA w/ Exhaust + Tune
11/2015 (464hp/439tq) ^ + BTR Stage 4 w/ Halltech CAI


Engine: BTR Stage 4 Cam; BTR Dual Spring Kit; C7R Chain; LS2 Tensioner; High Volume Oil Pump
Drivetrain: ACT T2S-G05 x2 Disc XT Street Kit
Exhaust: Kook's 1 7/8" Headers w/ Off-road pipes;Kook's 3" cat-back; QTP 3" cut-outs
Suspension: BMR 1.4" Front & 1.5" Rear Springs; Blackdog Solid Mounts w/ Poly Bushings
JakeW1990 is offline   Reply With Quote
Old 05-09-2016, 12:43 PM   #4
hammdo
'It's an experiment'
 
hammdo's Avatar
 
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE
Join Date: May 2014
Location: Dallas TX
Posts: 6,767
Quote:
Originally Posted by JakeW1990 View Post
Thank you very much, Don. Purchasing today!
Awesome! Good guy to deal with. He'll treat you right..

-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." -Enzo Ferrari
See My Build: http://www.camaro5.com/forums/showthread.php?t=385577
hammdo is offline   Reply With Quote
Old 05-10-2016, 05:36 PM   #5
olblue75


 
olblue75's Avatar
 
Drives: 2010 2SS/RS
Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 4,066
Is their a link to CFD???
__________________
Orange Krush II
1LE Front with DSE Links and 32mm JPSS Rear Bar, Splitter, 3.91 Gears with 1LE Axles, 14/15 Heat extractor in a 13 1LE hood, 1LE shocks and struts,1LE Suede Flat bottom Steering wheel restitched in orange, 1LE short throw shifter with the Pegasus rear poly shifter mount, ZL1 Rockers, Belly Pan and pedals, Z/28 Intake, Skip Shift eliminator, 1LE diffuser with dual mode mufflers, Z/28 headers and Cats, 1 piece DSS Drive Shaft, C7 Z06 Vented Piston Calipers and CTS-V Rotors, PAFDT Solid Cradle bushing, Z/28 Toe Rods and UCA Bushings.
olblue75 is offline   Reply With Quote
Old 02-01-2018, 09:31 AM   #6
craigd853
 
Drives: 199 SS Camaro
Join Date: Oct 2008
Location: MD
Posts: 161
Quote:
Originally Posted by JakeW1990 View Post
Once upon a time I had a link for a kit that replaces a section of the crossmember with a bolt-on section so the oil pan can be removed at-will. I looked around on google and briefly on the site with no results.

Does anyone have a link to someone that sells a lot that I'm referencing? It will require the cutting o the crossmember and welding on the new brackets that will hold the new chassis component via bolts. Thinking about going this route.
Hi Jake, or anyone else that could help was looking on camaro5 for someone who had ordered the cross member kit for their car. Could you or someone please give me the website for this? My oil pan is leaking as well. Thanks
craigd853 is offline   Reply With Quote
Old 02-01-2018, 10:13 AM   #7
hammdo
'It's an experiment'
 
hammdo's Avatar
 
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE
Join Date: May 2014
Location: Dallas TX
Posts: 6,767
Quote:
Originally Posted by craigd853 View Post
Hi Jake, or anyone else that could help was looking on camaro5 for someone who had ordered the cross member kit for their car. Could you or someone please give me the website for this? My oil pan is leaking as well. Thanks
Pm CFD. He is moving his shop right now. He may have some but best to pm...

-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." -Enzo Ferrari
See My Build: http://www.camaro5.com/forums/showthread.php?t=385577
hammdo is offline   Reply With Quote
Old 02-01-2018, 10:26 AM   #8
Silver14
 
Drives: 2014 SIM 2SS
Join Date: Sep 2015
Location: Charlotte, NC
Posts: 424
http://www.camaro5.com/forums/member.php?u=25649
Silver14 is offline   Reply With Quote
Old 02-02-2018, 05:00 AM   #9
craigd853
 
Drives: 199 SS Camaro
Join Date: Oct 2008
Location: MD
Posts: 161
2010 camaro ss cross member replacement

Quote:
Originally Posted by Silver14 View Post
Thanks for the help guys appreciate it..
craigd853 is offline   Reply With Quote
Old 02-26-2018, 11:03 AM   #10
Sturgill_SS
 
Sturgill_SS's Avatar
 
Drives: 2010 Camaro SS 506whp/480TQ
Join Date: Jan 2017
Location: Independence, KY
Posts: 222
Following.. I just pm'd him as well for a bracket.
__________________
Lingenfelter heads - TSP F35 stg4 Cam - TSP under drive pulley - TSP dual springs/rods - ported ls3 intake - 3.91 gears - TSP Trunnion upgrade - LS7 Lifters - Long Tubes - MGW short throw - CAI - lowered 1 inch on BMR springs - Holley VC
Sturgill_SS is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:29 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.