You are browsing camaro5 
 |
|
11-12-2024, 09:33 PM
|
#1 |
 
Drives: 2011 Camaro 2SS/RS Join Date: Nov 2023
Location: Southern Colorado
Posts: 128
|
Brembo Caliper Decals
So replacing my rotors, pads and also replacing the rubber brake lines with a set of stainless steel lines. A few of the decals are somewhat worn off of the ccalipers. I would like the same white and red lettering.
Where is a good place to source them and what procedre should be done to do it correctly?
__________________
2011 SS/RS K&N Cold Air Intake, Borla Atak Cat Back, Ferrada CM1 Wheels, ZL-1 front spoiler, JSD strut tower brace, Elite Engineering catch can, Baer Rotors & Pads, Stop Tech SS Brake Lines. More to come...
|
|
|
|
11-13-2024, 06:35 AM
|
#2 |
 
Drives: 2013 Camaro SS Vert Join Date: Apr 2019
Location: Otsego, MI
Posts: 71
|
Look for high temp vinyl on Amazon. Had mine for years with no issues. They actually out lasted the G2 paint.
|
|
|
|
|
11-13-2024, 08:35 AM
|
#3 |
|
Drives: 2011 Camaro 2SS/RS Join Date: Nov 2023
Location: Southern Colorado
Posts: 128
|
They only seem to have the Chevrolet lettering in black and the Brembo lettering in white.... Cant find it in white and red like the originals
__________________
2011 SS/RS K&N Cold Air Intake, Borla Atak Cat Back, Ferrada CM1 Wheels, ZL-1 front spoiler, JSD strut tower brace, Elite Engineering catch can, Baer Rotors & Pads, Stop Tech SS Brake Lines. More to come...
|
|
|
|
|
11-13-2024, 10:32 AM
|
#4 |
 
Drives: Chevrolet Camaro SS Join Date: Jul 2021
Location: McKinney, TX
Posts: 331
|
|
|
|
|
|
11-13-2024, 11:56 AM
|
#5 |
Drives: 2011 2LT/RS Join Date: Dec 2020
Location: OC Cal
Posts: 172
|
I was looking at this listing on the Bay.
https://www.ebay.com/itm/114971346108?var=415086425253 Do you think you need to spray a clear coat over the decals? |
|
|
|
|
11-13-2024, 06:52 PM
|
#6 | |
    
Drives: 2010 2LT/RS Join Date: Mar 2015
Location: Palm Coast, FL
Posts: 1,496
|
Quote:
__________________
2010 2LT/RS
 ZL1 Appearance package, Flow Master American Thunder Cat Back Exhaust w/ QUAD TIPS, K&N Typhoon CAI, Ported VMAX TB, OEM GM Brembo Brakes Package w/ Hawks Carbon Ceramic Pads, Night Owl Halo Kit (WIFI), FRONT/REAR Carbon Fiber Wrapped Bowties, Rear Oracle Blue LED Bowtie, Oracle Ghosted Painted Side LED Markers, Silver Side Faded Gills, OEM Satin Camaro Fuel Door, OEM Strut Tower Brace, Detroit Speed Engineering 1.5" Lowering Springs, Koni Orange STR.T Struts, Z28 rear LCA's, Black Magic rear 32" sway bar, 1LE front sway bar w/ DSE end links. Evil Energy Catch Can. |
|
|
|
|
|
11-14-2024, 10:29 AM
|
#7 |
        
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 12,250
|
When I originally painted my stockers with the G2 caliper paint kit, and put new decals on them, I did spray them with a coat of hi-temp clear to protect them, and keep them clean.
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
 |
|
|
|
|
11-14-2024, 09:37 PM
|
#8 |
|
Drives: 2011 Camaro 2SS/RS Join Date: Nov 2023
Location: Southern Colorado
Posts: 128
|
ok so check on the clear coat, Ill use a matte clear if I can find it.
__________________
2011 SS/RS K&N Cold Air Intake, Borla Atak Cat Back, Ferrada CM1 Wheels, ZL-1 front spoiler, JSD strut tower brace, Elite Engineering catch can, Baer Rotors & Pads, Stop Tech SS Brake Lines. More to come...
|
|
|
|
|
11-15-2024, 01:45 AM
|
#9 | |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,641
|
Quote:
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
|
|
|
|
|
11-15-2024, 04:01 PM
|
#10 | |
|
Drives: 2011 2LT/RS Join Date: Dec 2020
Location: OC Cal
Posts: 172
|
Quote:
I have not used them. I bought all new PowerStop Brembo F & B to do the upgrade on my V6. They have powerstop decals on them now. I was thinking on removing them just not sure yet. |
|
|
|
|
|
11-16-2024, 08:36 AM
|
#11 |
Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021
Location: NY
Posts: 1,399
|
I purchased like 6 sets of Decals from a vendor on Ebay as I was nt sure what color I wanted to go with, My ZL1 calipers were in nice shape for the most part but the front's had some issues so I scuffed/Sanded those areas and I painted from the caliper split line forward ( Front half of caliper ) as the backs were perfect and then applied decal and then cleared.
I used Hi temp paint and clear, Id have to go out to the garage to see what brand I ended up using as the VHT Satin and Matte Hi Temp clear was giving me issues spraying blotchy and I tried a couple cans. I believe I ended up using a Gloss Black which I then toned done with either a Satin or Matte clear. I did Ceramic coat the calipers and both rears gave me a little trouble they were turning purple but I was able to clear that up with a lot of polishing, I then waited longer and re ceramic with a different brand and all was good.
__________________
GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir
GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount. |
|
|
|
|
11-16-2024, 08:46 AM
|
#12 |
|
Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021
Location: NY
Posts: 1,399
|
Here are some pictures
__________________
GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir
GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount. |
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
