Installing HUD in your camaro - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Dtrimpi87 · 11-27-2012, 09:19 PM

Quote:

Originally Posted by Obzen

bumping this for all the recent HUD purchasers

Thanks homeslice

WCoolBreeze · 11-27-2012, 09:29 PM

For those of you who do get the HUD installed into your Camaro's, please remember to add your information to my list.

http://www.camaro5.com/forums/showthread.php?t=117696

Walt B.

jeepguy_1980 · 12-24-2012, 08:07 PM

I found this harness behind the radio when I was installing my HUD. Any idea what it's for?

2SSRS@Gen5diy · 12-24-2012, 08:52 PM

yes, .......... that is where all the date on the low speed bus meet, and from there they go to the BCM`

seanurban · 12-25-2012, 11:27 AM

What does 1. Disable SIR system on 2-41 mean?

mr_honez · 12-25-2012, 11:36 AM

Quote:

Originally Posted by caverman

Where is in the info about installing the HUD switch that is beside the steering wheel?

I'm saving up mod money and I'm torn between either HUD or the rearview mirror camera. The HUD install seems pretty intense. I'm wondering if it's really worth all the effort. Never had HUD before and some people tell me they can't live without it and others say after a while you never pay attention to it.

Love it. It's worth the hassle for sure. I'd do it if were me, but I decided to get one with it already installed. Ofer's prices are the best too from what I've found. The camara is great as well but I like the HUD a little more.

RedRyder · 01-12-2013, 11:19 AM

Just did this, thanks for the directions, Ofer! It turned out great and I did the dash abl at the same time.

FYI, I used a T45 on the big torx bolt on the steering wheel. Not sure if it's exactly the right size since it seemed a bit loose but it worked fine.

dkp2LT · 01-12-2013, 11:49 AM

^ The T50 hex worked perfectly for me.

I was going to do the dash kit, bought it, but I also have the abl cup holders and it turned out way too much. Ended up keeping the cup holders and not the dash.

jakepayne14 · 05-02-2013, 07:09 AM

where is the buttons and knobs for the hud ? im looking at buying one but the seller and i both do not know if you need or dont need these buttons or knobs for it !

2SSRS@Gen5diy · 05-02-2013, 08:05 AM

Quote:

Originally Posted by jakepayne14

where is the buttons and knobs for the hud ? im looking at buying one but the seller and i both do not know if you need or dont need these buttons or knobs for it !

What is buttons or knobs ? do you mean the switch ? and yes you do need it.

PfadtRacing · 05-02-2013, 12:04 PM

Just had a buddy do this over the weekend, I helped and we used this write-up as a guide. Turned out great! Thanks for taking the time to post this for everyone

2SSRS@Gen5diy · 05-02-2013, 01:08 PM

Quote:

Originally Posted by PfadtRacing

Just had a buddy do this over the weekend, I helped and we used this write-up as a guide. Turned out great! Thanks for taking the time to post this for everyone

Thanks its nice to have things to do to the car, and if i may your not to bad at it. LOL

jakepayne14 · 05-02-2013, 01:13 PM

Alright thanks and does you or anybody know what hardware I need for this kit because I'm trying to get it as cheap as possible and I found someone on eBay who's willing to work with me and give me a good deal on just the projector so ill need everything else such as the harness and switch and what not but I wanted to know what hardware stuff I need for it?

The Stig · 05-02-2013, 02:09 PM

Quote:

Originally Posted by jakepayne14

Alright thanks and does you or anybody know what hardware I need for this kit because I'm trying to get it as cheap as possible and I found someone on eBay who's willing to work with me and give me a good deal on just the projector so ill need everything else such as the harness and switch and what not but I wanted to know what hardware stuff I need for it?

Easiest thing would be to buy the HUD retrofit kit from Gen5 DIY

11-27-2012, 09:29 PM	#30
WCoolBreeze 2SS Drives: 2016 2SS, Red Garnet Tint Join Date: Nov 2008 Location: Imperial, CA Posts: 1,343	For those of you who do get the HUD installed into your Camaro's, please remember to add your information to my list. http://www.camaro5.com/forums/showthread.php?t=117696 Walt B. __________________ 2016 Camaro 2SS 2005 Dodge Magnum R/T (Yes it has a Hemi) 1987 Camaro RS (California Special) - For Sale Gen6, 2016 Camaro 2SS, Red Garnet Tint (with Silver Rally Stripes) Ordered: 2-12-2016 TPW: 3-7-2016 Built: 3-7-2016 VIN 1G1FH78G0157626 Delivered: 4-26-2016

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	65	12-14-2022 07:23 AM
Gran Turismo 5... No Camaro?	5thGenOwner	5th Gen Camaro SS LS LT General Discussions	111	12-06-2011 10:06 AM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM

12-24-2012, 08:07 PM	#31
jeepguy_1980 Drives: 2010 Camaro 1SS Join Date: May 2010 Location: Newport News Posts: 1,310 View My Garage	I found this harness behind the radio when I was installing my HUD. Any idea what it's for?

12-24-2012, 08:52 PM	#32
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	yes, .......... that is where all the date on the low speed bus meet, and from there they go to the BCM`

12-25-2012, 11:27 AM	#33
seanurban Drives: 2016 2SSRS Black Join Date: Apr 2012 Location: New York Posts: 73	What does 1. Disable SIR system on 2-41 mean?

01-12-2013, 11:19 AM	#35
RedRyder Drives: 2010 VR 2SS/RS M6 Camaro Join Date: Feb 2010 Location: Atlanta, GA Posts: 499 View My Garage	Just did this, thanks for the directions, Ofer! It turned out great and I did the dash abl at the same time. FYI, I used a T45 on the big torx bolt on the steering wheel. Not sure if it's exactly the right size since it seemed a bit loose but it worked fine.

01-12-2013, 11:49 AM	#36
dkp2LT Drives: '11 2SS, '11 C6 GS, '04 MDX Join Date: Feb 2012 Location: Kearney, MO Posts: 2,845	^ The T50 hex worked perfectly for me. I was going to do the dash kit, bought it, but I also have the abl cup holders and it turned out way too much. Ended up keeping the cup holders and not the dash.

05-02-2013, 07:09 AM	#37
jakepayne14 Drives: 1ls 2012 camaro Join Date: May 2013 Location: roopville Posts: 2	where is the buttons and knobs for the hud ? im looking at buying one but the seller and i both do not know if you need or dont need these buttons or knobs for it !

05-02-2013, 12:04 PM	#39
PfadtRacing Drives: 2010 Camaro, 2006 Z06 Join Date: Feb 2009 Location: SLC, UT Posts: 3,370	Just had a buddy do this over the weekend, I helped and we used this write-up as a guide. Turned out great! Thanks for taking the time to post this for everyone

05-02-2013, 01:13 PM	#41
jakepayne14 Drives: 1ls 2012 camaro Join Date: May 2013 Location: roopville Posts: 2	Alright thanks and does you or anybody know what hardware I need for this kit because I'm trying to get it as cheap as possible and I found someone on eBay who's willing to work with me and give me a good deal on just the projector so ill need everything else such as the harness and switch and what not but I wanted to know what hardware stuff I need for it?