11-02-2019, 10:36 AM | #1 |
Drives: Camaro 45th A. E. Dragster Join Date: Sep 2012
Location: Butzbach, Germany
Posts: 71
|
Fuelline body bracket removal
|
11-03-2019, 09:44 AM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Kinda looks like a Tory but hard to tell with staining.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
11-03-2019, 01:12 PM | #3 |
Drives: Camaro 45th A. E. Dragster Join Date: Sep 2012
Location: Butzbach, Germany
Posts: 71
|
That's what I also thought, but I've tried a couple of sizes and no one fits :-(
|
11-09-2019, 03:26 AM | #4 |
Drives: Camaro 45th A. E. Dragster Join Date: Sep 2012
Location: Butzbach, Germany
Posts: 71
|
SOLVED ^^ the bracket isn't held by a nut, the nut is underneath :-D
|
|
|
|
|